Schneider Electric ATV630D15N4 Altivar Process 630 Variable Speed Drive
Overview
The Schneider Electric ATV630D15N4 is a 15 kW (20 HP) drive from the Altivar Process 630 range, engineered for demanding process applications across pumping, fan, compressor, and conveying duties from 1 HP to 500 HP. Rated for 380–480V three-phase supply in an IP21 / UL Type 1 enclosure, the ATV630D15N4 goes beyond basic speed control by embedding power measurement, an energy dashboard, process monitoring, and asset-protection functions directly into the drive, giving plant engineers real operational visibility without additional instrumentation.
Backed by genuine manufacturer documentation, Seven Star LLC proudly supplies the Schneider Electric ATV630D15N4 to process plants, water utilities, and industrial facilities throughout the Sultanate of Oman and the wider GCC. Engineers in Muscat, Sohar, and Salalah can source Altivar Process drives through Seven Star LLC with manufacturer documentation and technical support for critical process applications.
Operating Principle of the Schneider Electric ATV630D15N4
The ATV630D15N4 rectifies the incoming three-phase supply to a regulated DC bus and re-synthesizes it through an IGBT inverter using high-resolution sinusoidal PWM, delivering precise torque and speed control across a wide dynamic range. Beyond conventional V/F and vector control modes, the drive runs continuous internal calculations of instantaneous power, energy consumption, and mechanical load signature, comparing them against learned baselines to detect abnormal conditions such as pump cavitation, fan belt slippage, or bearing degradation before they cause unplanned downtime.
This embedded process intelligence lets the ATV630D15N4 function as both a motor controller and a condition-monitoring device on the same physical unit. The drive’s Stop and Go function automatically halts the motor during genuine no-flow or no-load conditions and restarts on demand, reducing energy consumption on intermittent-duty pumps and compressors without requiring external logic in the plant PLC.
Engineering Design of the Schneider Electric ATV630D15N4
The Schneider Electric ATV630D15N4 uses a modular Altivar Process chassis with a removable graphic display terminal, multiple communication card slots, and an IP21 / UL Type 1 enclosure suitable for standard industrial panel rooms. The drive supports a wide range of fieldbus protocols including Modbus TCP, EtherNet/IP, PROFINET, and PROFIBUS DP through plug-in communication modules, allowing it to integrate into almost any existing plant SCADA or DCS architecture without a protocol converter.
Cooling is handled through an optimized heatsink and fan arrangement rated for continuous industrial duty, while safety functions including Safe Torque Off are integrated as standard to simplify machine-safety compliance. The drive’s embedded energy dashboard and event logging are accessible locally through the graphic terminal or remotely via EcoStruxure software, giving maintenance teams a single point of access for diagnostics, trending, and firmware management.
Key Features of the Schneider Electric ATV630D15N4
The Schneider Electric ATV630D15N4 combines high-performance motor control with embedded process intelligence rarely found in a standard variable speed drive.
- Rated for 15 kW (20 HP) motors on a 380–480V three-phase supply, part of a scalable range from 1 HP to 500 HP.
- Embedded power measurement and energy dashboard eliminate the need for separate power meters on monitored circuits.
- Built-in asset monitoring detects abnormal mechanical signatures such as cavitation, misalignment, or bearing wear.
- Stop and Go function automatically manages intermittent pump and fan duty to reduce wasted energy.
- Supports Modbus TCP, EtherNet/IP, PROFINET, and PROFIBUS DP via plug-in communication modules.
- Integrated Safe Torque Off function simplifies compliance with machine-safety standards.
- Drift monitoring flags gradual process deviations before they escalate into failures.
- IP21 / UL Type 1 enclosure suits standard industrial control rooms and switchgear areas.
Industrial Applications
The Schneider Electric ATV630D15N4 Altivar Process 630 drive is widely deployed on process pumps, industrial fans, compressors, mixers, and conveyor systems in water and wastewater treatment plants, oil and gas facilities, cement plants, and general manufacturing. In Oman, desalination plants, district cooling utilities, and industrial estates in Sohar and Salalah use the ATV630D15N4 to gain embedded energy visibility and predictive asset protection on critical process motors without deploying separate monitoring hardware, reducing both capital cost and maintenance complexity.
Working closely with plant engineers in the region, Seven Star LLC distributes the ATV630D15N4 to EPC contractors, utilities, and industrial end users across Muscat, Sohar, and Salalah, supporting projects from single-drive retrofits to multi-drive process automation upgrades. Regional buyers benefit from genuine Altivar Process hardware, correct firmware, and technical sizing support suited to Oman’s process industries.
Technical Specifications
The table below summarizes the key electrical and mechanical specifications of the Schneider Electric ATV630D15N4 Altivar Process 630 drive.
| Parameter | Specification |
|---|---|
| Model | ATV630D15N4 |
| Range | Altivar Process 630 |
| Motor Power | 15 kW / 20 HP |
| Supply Voltage | 380–480V 3-phase ±10% |
| Protection Degree | IP21, UL Type 1 |
| Communication | Modbus TCP, EtherNet/IP, PROFINET, PROFIBUS DP (optional modules) |
| Safety Function | Integrated Safe Torque Off (STO) |
| Monitoring | Embedded power measurement, energy dashboard, asset and drift monitoring |
| Control Method | Sinusoidal PWM, vector and V/F control |
| Firmware | ATV600 Product Firmware, field-upgradeable via EcoStruxure |
| Ambient Operating Temperature | -10°C to +50°C |
Request a Quote for Schneider Electric ATV630D15N4 Altivar Process 630 Variable Speed Drive
Process engineers and procurement teams in Oman and across the GCC can request a formal quotation for the Schneider Electric ATV630D15N4 Altivar Process 630 drive directly from Seven Star LLC. With fast quotation turnaround and technical support, Seven Star LLC confirms lead time at quotation, provides full technical datasheets on request, and connects buyers with the instrumentation and automation division for process-specific sizing, fieldbus integration, and selection support. Contact Seven Star LLC today to secure genuine Schneider Electric process drives with dependable local delivery and after-sales service.
Related Products
- Danfoss 132B0101 VLT Control Panel LCP 12
- LS Electric LSLV0022S100-4EXNNS S100 Series VFD
- Schneider Electric ATV12H018M2 Altivar 12 Variable Speed Drive
- Allen-Bradley PowerFlex 755 AC Drive
- ABB ACS580 General Purpose Variable Frequency Drive (VFD)
- ABB ACS350 – 11kW 400V 3ph – AC Inverter Drive Speed Controller
Schneider Electric product families on this page
Low voltage protection covers Acti9 miniature breakers and their communicating system, ComPacT NSX and PowerPacT H-frame molded case breakers and MasterPact NW air circuit breakers. Altivar 320 variable speed drives appear in several ratings, for example the ATV320U22N4C at 2.2 kW and the ATV320U75N4B at 7.5 kW. Automation is represented by Modicon TM3 expansion modules such as the TM3TM thermocouple input module. Metering includes the EasyLogic PM2000 power meter and iEM2000 modular energy meters. Trihal cast resin transformers and Spacial enclosure accessories complete the electrical distribution side.Where Schneider Electric equipment is used
Main and distribution switchboards in buildings, utilities and industrial plants carry the breakers and meters. Altivar drives run pumps, fans, conveyors and packaging machines. Modicon controllers with TM3 I/O are common in machine builders' panels, and Trihal transformers serve indoor substations where a dry-type unit is specified.Ordering Schneider Electric parts: what we need
The commercial reference printed on the product or its carton is the fastest route. For breakers without a reference send rated current, breaking capacity, number of poles, trip unit type, fixed or drawout construction and the accessories fitted, such as shunt trip, auxiliary contacts or motor mechanism. For drives give motor power, supply voltage and the communication option. For transformers send rated power, primary and secondary voltage, vector group and enclosure rating.Browse Schneider Electric products by category: Circuit Breaker, Electrical & Power Modules, AC Drives, PLC & I/O Cards, Metering Systems.
Reviews
There are no reviews yet.