- Automation & ControlView all 1,920 products
- AC Drives
- PLC & I/O Cards
- Industrial Communications
- Vibration Monitoring
- Automation Accessories
- Controllers & Data Acquisition
- Isolator & Barrier
- CCTV & Security
- Safety Switches & Guard Locking
- Encoders
- HMI Displays
- Industrial Computers
- Motor Soft Starters
- Servo Drives
- Pneumatic Cylinders
- Machine Vision
- Automation Software
- Robotics
Brand: Schneider Electric
Schneider Electric METSEPM5110 PowerLogic PM5110 Power Meter
Description
METSEPM5110 PowerLogic PM5110 meter with Modbus and 15th harmonic analysis
The METSEPM5110 is a Schneider Electric product listed in the datasheet as: power meter PowerLogic PM5110, modbus, up to 15th Harmonic, 1DO 33 alarms. The PM5110 is the mid-range PowerLogic PM5100 power meter. It measures energy and power quality to the 15th harmonic, communicates over Modbus RS485 and provides one digital output for pulse or alarm signalling. Seven Star LLC supplies the METSEPM5110 in Oman and the GCC as an independent supplier based in Muscat.
Reading the reference: METSE is the Schneider meter prefix and PM5110 the model, with the datasheet title listing Modbus, up to the 15th harmonic and one digital output.
Technical specifications of the METSEPM5110
| Parameter | Specification |
|---|---|
| Manufacturer / part number | Schneider Electric / METSEPM5110 |
| Description | power meter PowerLogic PM5110, modbus, up to 15th Harmonic, 1DO 33 alarms |
| Range | PowerLogic |
| Product name | PowerLogic PM5000 |
| Product or Component Type | Power meter |
| Device short name | PM5110 |
| Power quality analysis | up to the 15th harmonic |
| Device Application | Power monitoring |
| Type of measurement | Current; Voltage; Frequency; Power factor; Energy; Active and reactive power |
| [Us] rated supply voltage | 90 to 450 V AC 45 to 65 Hz; 100 to 300 V DC |
| Network Frequency | 50 Hz; 60 Hz |
| Line Rated Current | 1A; 5A |
| type of network | 1P + N; 3P + N; 3P |
| Maximum power consumption in | 11 VA 415 V |
| Ride-through time | 80 ms 120 V AC typical; 100 ms 230 V AC typical; 100 ms 415 V AC typical; 50 ms 125 V DC typical |
| Display Type | Monochrome graphic LCD |
| Display Resolution | 128 x 128 pixels |
| Sampling rate | 64 samples/cycle |
| Measurement current | 50 to 8500 mA |
| Analogue input type | Voltage (impedance 5 MOhm); Current (impedance <= 0.3 mOhm) |
| Measurement voltage | 35 to 760 V AC 45 to 65 Hz between phases; 20 to 440 V AC 45 to 65 Hz between phase and neutral |
| Frequency measurement range | 45 to 65 Hz |
| Number of inputs | 0 |
| Measurement accuracy | Active energy ± 0.5 %; Reactive energy ± 2 %; Active power ± 0.5 %; Apparent power ± 0.5 %; Frequency ± 0.05 %; Power factor ± 0.5 |
| Accuracy class | Class 0.5S active energy IEC 62053-22 |
| Number of Outputs | 1 digital |
| Communication port protocol | Modbus RTU and ASCII 9.6, 19.2 and 38.4 kbauds even/odd or none – 2 wires 2500; V; JBUS |
| Communication port support | RS485 |
| Data recording | Time stamping; Min/max of instantaneous values |
| Connections – terminals | Voltage circuit screw terminal block4; Control circuit screw terminal block2; Current transformer screw terminal block6 |
| Mounting Mode | Flush-mounted |
| Mounting support | Framework |
| Standards | UL 61010-1; EN 50470-3; EN 50470-1; IEC 62053-22:2020; IEC 60529; IEC 62053-24; IEC 61557-12:2015; IEC 62053-23:2020; IEC 62052-11:2020 |
| Product certifications | CE conforming to IEC 61010-1; CULus conforming to UL 61010-1 |
| Width | 96 mm |
| Depth | 72 mm |
| Height | 96 mm |
| Net Weight | 380 g |
| Electromagnetic compatibility | Voltage dips and interruptions immunity test class A conforming to IEC 61000-4-11 |
| IP degree of protection | IP54 display: conforming to IEC 60529; IP30 rear: conforming to IEC 60529 |
| Relative humidity | 5 to 95 % 50 °C non-condensing |
| Pollution degree | 2 |
Measured quantities and accuracy of the METSEPM5110
Power quality: up to the 15th harmonic. Measured quantities: Current; Voltage; Frequency; Power factor; Energy; Active and reactive power. Accuracy class: Class 0.5S active energy IEC 62053-22. Display: Monochrome graphic LCD. Protocols: Modbus RTU and ASCII 9.6, 19.2 and 38.4 kbauds even/odd or none – 2 wires 2500; V; JBUS. Outputs: 1 digital. Data recording: Time stamping; Min/max of instantaneous values.
This is the version for energy-management programmes: multi-tariff counters and demand logging answer questions about when and where energy is used, and the harmonic data point to equipment that may need filtering.
Choosing between the PM5110 and its neighbours
The PM5110 has serial communication only; if Ethernet is needed, choose a PM5300 or PM5500 model (for example PM5560). If only basic energy readout is needed, the PM2110 is a lower-cost step.
The bigger models differ in accuracy class, harmonic order, memory and I/O count, so list the requirements first.
Selection checklist for the METSEPM5110
- Modbus RS485 network and address plan.
- Harmonic analysis to 15th order sufficient.
- Digital output use: pulse or alarm.
- Accuracy class required.
- CT and VT ratios.
- Panel cut-out.
Wiring and setting of the METSEPM5110
Mount flush, wire voltage via fuses and CTs via shorting blocks, and set the network type, ratios and Modbus parameters. Use twisted-pair screened cable with termination for the RS485 trunk.
Check the phase order and CT direction by looking at power values with a known load, and log baseline energy values.
Typical applications of the METSEPM5110 in Oman and the GCC
Feeders in industrial plants, commercial buildings and utilities, where a Modbus network already collects meter data.
Dimensions, environment and approvals of the METSEPM5110
For the METSEPM5110, plan the mounting space from the datasheet: 96 mm (W) x 96 mm (H) x 72 mm (D). The METSEPM5110 weighs 380 g. Mounting, derating and enclosure choices follow the environmental data below, which should be compared with the actual panel temperature and the dust and humidity of the site in Oman and the GCC.
Ambient temperature limits in the datasheet: -25 to 70 °C meter. Relative humidity: 5 to 95 % 50 °C non-condensing. Ingress protection: IP54 display: conforming to IEC 60529; IP30 rear: conforming to IEC 60529. Operating altitude: 2000 m CAT III. Standards listed: UL 61010-1; EN 50470-3; EN 50470-1; IEC 62053-22:2020; IEC 60529; IEC 62053-24; IEC 61557-12:2015; IEC 62053-23:2020; IEC 62052-11:2020. Certifications listed for this reference: CE conforming to IEC 61010-1; CULus conforming to UL 61010-1.
Information to send with an RFQ for the METSEPM5110
- Full reference and quantity required
- Existing equipment, panel or rack it must fit
- Supply voltage, load or signal details of the application
- Required delivery location and timing
- Whether a spare, a replacement or a new installation
Site conditions in Oman for the METSEPM5110
Electrical rooms and outdoor panels in the Gulf often operate well above the 25 °C reference temperature used in many catalogues. Before you finalise the METSEPM5110, compare the expected panel temperature with the operating range and any output derating stated in the manufacturer documentation, and leave the recommended clearance above and below the device for convection. Supply quality also varies between sites, so confirm the input voltage range, frequency and any requirements for protection on the supply side.
Where the device feeds or monitors critical loads, plan how faults will be signalled to the control system and how a replacement can be installed quickly. Keeping one spare METSEPM5110 per site and recording its settings helps maintenance teams in Oman restore service with minimum downtime.
Documents and quotation
A datasheet for this product is attached on this page. It lists the electrical, mechanical and environmental data summarised above.
Send us the part number, quantity and application and we will confirm availability and a quotation. Seven Star LLC is an independent supplier in Muscat and does not represent itself as an official channel of the manufacturer.
Datasheets & Documents
- Datasheet Schneider Electric METSEPM5110 Datasheet Download
Reviews (0)
About brand
Schneider Electric is the French group for energy management and industrial automation: low and medium voltage switchgear and circuit breakers, motor control, drives, PLCs, power monitoring, UPS systems and building management. Its history goes back to 1836, when the brothers Adolphe and Eugène Schneider took over the iron and steel works at Le Creusot in Burgundy. Over the 20th century the company left steel and heavy engineering and became an electrical group through acquisitions such as Merlin Gerin, Télémécanique, Square D and Modicon. Its head office is in Rueil-Malmaison near Paris, and its shares are listed on Euronext Paris.
Schneider Electric company profile
| Origins | 1836, Le Creusot, France: Adolphe and Eugène Schneider take over the Le Creusot foundry |
|---|---|
| Headquarters | Rueil-Malmaison (Paris region), France |
| Ownership | Public company listed on Euronext Paris |
| Key acquisitions | Télémécanique (1988), Square D (1991), Merlin Gerin (1992), Modicon (1997), APC (2007), Invensys (2014); majority owner of AVEVA software |
| Brand names still in use | Acti9, ComPacT and MasterPacT breakers, TeSys motor control, Altivar drives, Altistart soft starters, Modicon PLCs, Harmony control components, PowerLogic and Easergy protection and metering, APC UPS, EcoStruxure software platform |
| Product families | Low voltage distribution, medium voltage switchgear and protection relays, motor control and drives, PLCs and HMIs, power meters, UPS and cooling, enclosures, building automation and energy software |
Milestones
- 1836: The Schneider brothers acquire the Le Creusot works; the business grows in steel, locomotives and heavy engineering.
- 1975: First investment in Merlin Gerin, a French maker of electrical distribution equipment.
- 1988–1992: Télémécanique, Square D (USA) and Merlin Gerin join the group, making it an electrical specialist.
- 1997: Modicon, the company behind the first programmable logic controller, joins the group.
- 1999: The group takes the name Schneider Electric.
- 2007 and 2014: APC (UPS and data centre power) and Invensys (process automation) are acquired.
Choosing Schneider Electric breakers and motor control
Circuit breakers are chosen by current and breaking capacity. Acti9 miniature circuit breakers (iC60, C120) protect final circuits up to 125 A. ComPacT NSX molded case breakers cover about 16 to 630 A, and the letter after the frame size sets the breaking capacity: B, F, N, H, S, L from lowest to highest. MasterPacT air circuit breakers are used as main incomers on large switchboards. For motors, a TeSys contactor with an LRD overload relay or a GV2 motor circuit breaker suits direct starting, an Altistart soft starter reduces starting current, and an Altivar drive controls speed. The breaking capacity must always be at least the prospective short-circuit current at the point of installation.
Where Schneider Electric products are used
In Oman and the GCC, Schneider Electric equipment is found in main and sub-main switchboards of commercial and residential buildings, motor control centres in water, oil and gas and industrial plants, substations protected by Sepam and Easergy relays, data centres powered by Galaxy and APC UPS systems, and buildings controlled by EcoStruxure Building Operation.
APC by Schneider Electric: UPS and critical power
Since 2007, APC has been part of Schneider Electric and is now its product brand for uninterruptible power supplies, replacement batteries, battery packs, network management cards and rack power distribution. Our APC catalogue covers Smart-UPS line-interactive and on-line models, Easy UPS On-Line, the modular Symmetra LX, RM and PX ranges, Silcon three-phase systems and their spare part kits, and the RBC cartridges that keep them running. Schneider Electric breakers, drives and PLCs can be quoted together with APC UPS systems in one request.
Schneider Electric products we list
| Family | Examples |
|---|---|
| Circuit breakers | Acti9 iC60N, C120N, NSX100F, NSX250N, NSX630, EasyPact EZC, MasterPacT MTZ1, MasterPacT NW |
| Motor control | TeSys Deca LC1D, TeSys F, LRD overload relay, GV2ME08, Altistart 22, Altistart 480 |
| Drives | Altivar 12, Altivar 320, ATV340, Altivar Process 630, ATV930, Lexium 32 servo |
| PLCs, HMIs and relays | Modicon M221, M241, M580 BMEP582040, Zelio Logic, Magelis HMISTU655 |
| Protection, metering and power | Sepam series 20, Easergy P3U30, MiCOM P139, PM5560, iEM3255, Galaxy VS UPS |
Ordering Schneider Electric products: what we need
Send the commercial reference from the label (for example LC1D18M7 or ATV320U22N4C). For breakers, confirm the rated current, number of poles, breaking capacity and trip unit. For contactors, give the coil voltage. For drives, give the motor power and supply voltage. APC products are listed on their own brand page.
Facts checked against Schneider Electric's published company history, October 2026.
Browse Schneider Electric products by category: Circuit Breaker, Electrical & Power Modules, AC Drives, PLC & I/O Cards, Metering Systems, UPS and Batteries.
FAQ
Questions about the Schneider Electric METSEPM5110 PowerLogic PM5110
Answers from our engineering team on installation, compatibility and integration.
01What harmonics does the METSEPM5110 measure?
Datasheet: up to the 15th harmonic.
02What accuracy class has it?
Stated as Class 0.5S active energy IEC 62053-22.
03What is the communication port?
Listed: RS485.
04How many digital outputs has the METSEPM5110?
It has 1 digital.
05What supply does it need?
The supply is 90 to 450 V AC 45 to 65 Hz; 100 to 300 V DC.
Reviews
There are no reviews yet.