Schneider Electric A9V41225 Vigi iC60 2P 25 A 30 mA

A9V41225: Vigi iC60 2P 25 A 30 mA add-on block

The A9V41225 is a Schneider Electric Acti9 Vigi iC60 add-on residual current device in a two-pole version, rated 25 A with 30 mA sensitivity and Type AC detection. It is not a stand-alone breaker: it is clipped to the side of a compatible iC60 miniature circuit-breaker and connected by screws, which adds earth-leakage protection to the overload and short-circuit protection that the breaker already provides. Seven Star LLC supplies the A9V41225 in Oman and the GCC as an independent supplier based in Muscat.

Decoding the product from the datasheet: A9V41225 has a 230–240 V AC rated operational voltage, meant for single-phase 230 V networks, it occupies 3 modules of 9 mm and weighs 0.165 kg. Its tripping is voltage independent, meaning the residual current function does not depend on the mains voltage being present to operate.

Technical specifications of the A9V41225

Compatible iC60 breakers for the A9V41225

The datasheet lists the range compatibility as Acti9 iC60 miniature circuit-breaker and Acti9 Reflex iC60 integrated control circuit breaker. The product compatibility entries for the A9V41225 are: IC60a/N/H/L/P single terminal miniature circuit-breaker ≤ 25 A; Disbo iC60N/H miniature circuit-breaker ≤ 25 A; IC60L MA miniature circuit-breaker ≤ 16 A; Reflex iC60 integrated control circuit breaker ≤ 25 A. The upper current limit in each line is the point to watch: the add-on block rated 25 A is intended to pair with breakers at or below that class, and some breaker versions are restricted to lower currents than the others.

The Reflex iC60 integrated control circuit breaker is included in the compatibility list, so the block can also be used with that control-breaker version. Because the block has 2 poles, the breaker normally has to match that pole count; confirm the pairing against the compatibility table before ordering the breaker and block as a set.

Where the A9V41225 fits in Oman and the GCC

Earth-leakage add-on blocks of this kind are used in commercial buildings, camps, workshops, pump houses, desalination plant auxiliaries, utility substations, and small distribution boards in oil and gas facilities. A 30 mA two-pole unit such as the A9V41225 is normally installed on final circuits close to people or portable tools. Humid coastal air, dust and high summer temperatures put stress on terminals and on the test mechanism, so periodic inspection is a good habit.

Installation and testing of the A9V41225

Connect the A9V41225 to the bottom of the matching breaker with the supplied screw connection, then fix the assembly on DIN rail. Terminals at the bottom are tunnel type: 1–25 mm² rigid without cable end; 1–16 mm² flexible without cable end; 1–16 mm² flexible with cable end. Strip the conductor to 14 mm and tighten to 2 N.m; the comb busbar is compatible at the bottom.

After energising, use the front test button to confirm tripping, and check the trip indicator shows the fault state. Record the test in the maintenance log and repeat it at regular intervals. Keep in mind the temperature window of -5–60 °C for operation; in hot enclosures at Gulf sites, mount the block away from other heat sources and consider derating or ventilating the board. The unit is IP20 on its own and IP40 when fitted in a modular enclosure.

Other Vigi iC60 blocks and how they differ from the A9V41225

The other 2-pole blocks in our lane are: A9V01225 (2P 25 A 30 mA AC), A9V10225 (2P 25 A 10 mA AC), A9V12225 (2P 25 A 100 mA AC), A9V12263 (2P 63 A 100 mA AC), A9V41263 (2P 63 A 30 mA AC), A9V44240 (2P 40 A 300 mA AC). Across the entire set, the key differences are pole count, current class (25 A, 40 A or 63 A), sensitivity (10, 30, 100 or 300 mA), type (AC or A) and the voltage window. The A9V41225 is the one with 2 poles, 25 A, 30 mA, Type AC and 230-240 V AC 50/60 Hz V AC.

For reference, the wider list we are quoting is: A9V01225 (2P 25 A 30 mA), A9V10225 (2P 25 A 10 mA), A9V12225 (2P 25 A 100 mA), A9V12263 (2P 63 A 100 mA), A9V12463 (4P 63 A 100 mA), A9V22325 (3P 25 A 100 mA), A9V41263 (2P 63 A 30 mA), A9V41325 (3P 25 A 30 mA), A9V41363 (3P 63 A 30 mA), A9V41425 (4P 25 A 30 mA), A9V41440 (4P 40 A 30 mA), A9V41463 (4P 63 A 30 mA), A9V44240 (2P 40 A 300 mA). The width and the weight also change with pole count and current, which affects how much space the combination takes in a board.

What 30 mA and Type AC mean for the A9V41225

The A9V41225 offers a 30 mA threshold, the sensitivity most associated with additional protection of people against electric shock; it is a common choice for socket circuits, wet areas and portable-equipment feeders. The tripping delay is listed as instantaneous, so there is no built-in time delay for selectivity at this reference.

Type AC responds to sinusoidal alternating residual current. It does not carry the extra detection of pulsating DC components that Type A adds, so it fits conventional loads but is not the right pick for equipment with rectifiers or electronic drives that may produce pulsating DC earth currents. Selecting the sensitivity and the type is a design decision, not a catalogue preference: use the earthing system, the load type and the applicable wiring rules to decide, and avoid putting several loads with natural leakage behind one very sensitive block.

Information to send with an RFQ for the A9V41225

For a fast quotation on the this unit, send the part number, quantity, the type and rating of the miniature circuit-breaker it will be fitted to, the system voltage and earthing arrangement, the residual current sensitivity required by your design, and the delivery address in Oman or the GCC. If you are replacing an existing assembly, a photo of the label helps us match the pole count and current class.

Documents and quotation

A datasheet for the this unit is attached on this page. The version we reviewed is dated 8 Nov 2026.

Send the part number and your project details through the RFQ form; Seven Star LLC will confirm availability and lead time in Oman and the GCC.