- Automation & ControlView all 2,896 products
- Automation Accessories
- AC Drives
- PLC & I/O Cards
- Industrial Communications
- Vibration Monitoring
- Controllers & Data Acquisition
- Isolator & Barrier
- Safety Switches & Guard Locking
- Motor Soft Starters
- CCTV & Security
- Encoders
- Pneumatic Cylinders
- HMI Displays
- Servo Drives
- Industrial Computers
- Machine Vision
- Automation Software
- Robotics
Brand: Fluke
Fluke 754 Documenting Process Calibrator with HART
Description
Overview
The Fluke 754 Documenting Process Calibrator-HART is a rugged, integrated communicating calibrator built to calibrate, maintain, and troubleshoot HART and other process instrumentation in a single handheld tool. By combining the functions of a pressure calibrator, temperature calibrator, and electrical multifunction calibrator with built-in HART communication, the 754 replaces multiple separate tools that field technicians would otherwise need to carry, source, simulate, and measure pressure, temperature, and electrical signals across a wide range of process applications.
Seven Star LLC supplies the Fluke 754 as an experienced supply partner of Fluke, supporting instrumentation calibration teams, maintenance departments, and calibration service providers across Muscat, Sohar, Salalah, and the wider Sultanate of Oman. Genuine Fluke calibrators, pressure modules, and accessories are available through Seven Star LLC for oil and gas, petrochemical, and industrial plant customers throughout the GCC.
Measurement and Operating Principle
The 754 measures and sources DC voltage, DC current, resistance, frequency, and thermocouple/RTD temperature signals, with typical measurement accuracies down to 0.01% + 5µA on 30mA DC current ranges and 0.02% + 0.005mV on 100mV DC voltage ranges. Interchangeable pressure modules – 28 module options are available, with basic accuracy to 0.05% and ranges starting from 0–1 inH2O (0–0.25kPa) – extend the 754 to source and measure pressure directly, eliminating the need for a separate dedicated pressure calibrator during transmitter calibration.
Integrated HART communication allows the 754 to configure, calibrate, and diagnose HART-enabled smart transmitters directly, without requiring a separate handheld communicator. This built-in HART capability lets technicians simultaneously read a transmitter’s digital HART output and its analog 4–20mA loop signal, quickly identifying discrepancies between digital and analog values that indicate a calibration or configuration fault.
Engineering Design of the Fluke 754
The 754 is housed in Fluke’s rugged yellow field-instrument casing, designed to withstand drops, dust, and the rough handling typical of plant and field calibration work, with a bright, easy-to-read display for outdoor and low-light readability. Automated calibration procedures, task documentation, and as-found/as-left results logging allow technicians to execute standardized calibration routines and capture results digitally in the field, rather than relying on handwritten logs later transcribed into calibration records.
USB connectivity allows calibration procedures, results, and documentation to be transferred to and from a PC, supporting integration with calibration management software for full audit-trail record keeping. The 754’s combination of automated procedures, integrated HART, and interchangeable pressure modules makes it a complete field calibration platform for process instrumentation technicians who need pressure, temperature, and electrical calibration capability without carrying multiple separate instruments.
Key Features
- Documenting process calibrator with integrated HART communication
- Measures and sources DC voltage, DC current, resistance, frequency, thermocouple/RTD temperature
- Compatible with 28 interchangeable pressure modules, accuracy to 0.05%
- Simultaneous digital HART and analog 4–20mA loop signal reading
- Automated calibration procedures with as-found/as-left documentation
- Rugged field-instrument housing for harsh plant environments
- USB connectivity for calibration data transfer and record keeping
- Replaces multiple separate pressure, temperature, and electrical calibrators
Industrial Applications
The Fluke 754 is used across oil and gas, petrochemical, power generation, and general process manufacturing facilities for routine calibration, commissioning, and troubleshooting of pressure transmitters, temperature transmitters, and HART-enabled smart instrumentation. Its documenting capability supports plants operating under regulatory or quality system requirements where calibration records must be traceable and auditable.
Across Oman’s process industries, from refineries and gas plants to power stations in Sohar and Salalah, Seven Star LLC supports instrumentation and calibration teams specifying the Fluke 754 for field calibration programs and HART transmitter maintenance. As a trusted supplier of Fluke products, Seven Star LLC provides genuine calibrators, pressure modules, and calibration accessories with technical support across Muscat and the wider GCC.
Technical Specifications
| Model | Fluke 754 Documenting Process Calibrator-HART |
|---|---|
| Communication | Integrated HART protocol communication |
| DC Voltage Accuracy | 0.02% + 0.005mV (100mV range, 1 year) |
| DC Current Accuracy | 0.01% + 5µA (30mA range, 1 year) |
| Resistance Accuracy | 0.05% + 50mΩ (10Ω range, 1 year) |
| Pressure Modules | 28 available, basic accuracy to 0.05%, from 0–1 inH2O |
| Temperature Inputs | Thermocouple and RTD |
| Documentation | Automated procedures, as-found/as-left logging |
| Connectivity | USB for PC data transfer |
| Housing | Rugged, field-rated handheld enclosure |
Why Choose Seven Star LLC for Fluke Documenting Process Calibrators
A documenting HART calibrator earns its place in a calibration program only when it is itself genuinely traceable, since technicians relying on an uncertified unit to certify plant instrumentation are building their entire quality record on an unverified foundation. Seven Star LLC supplies the Fluke 754 with part-number traceability and calibration documentation, backed by our trusted Fluke suppliership across Oman and the wider GCC. We also support instrumentation and calibration teams across Muscat, Sohar, and Salalah with HART configuration guidance and documentation software setup, so calibration records integrate cleanly into plant asset management and compliance reporting systems, and we advise on which HART-enabled accessories and mA loop simulation functions genuinely add value for a given maintenance team’s daily troubleshooting work, and support instrumentation departments across the region with consistent calibrator standardization so technicians moving between sites use familiar, verified equipment across every facility they support, and our applications engineers remain available to answer configuration questions as calibration procedures evolve.
Request a Quote for Fluke 754 Documenting Process Calibrator with HART
Contact Seven Star LLC, an experienced supply partner for Fluke in Oman and the GCC, for pricing, pressure module selection, and calibration software support for the Fluke 754 documenting process calibrator. Our team supports instrumentation calibration programs across Muscat, Sohar, Salalah, and the wider Sultanate of Oman with genuine Fluke calibration equipment.
Related Products
- Martel 3001 Multi-Function Temperature and Pressure Calibrator
- Keysight N3383A PNA Network Analyzer
- Sitelab UVF-500D Handheld Hydrocarbon Analyzer
- VIBXPERT II Vibration Analyzer Dual-Channel FFT
- FLIR E96 Advanced Thermal Imaging Camera
- Emerson 475 Field Communicator – HART & FOUNDATION Fieldbus
- Thorlabs PM400 Handheld Touchscreen Optical Power Meter Console
- Fluke 8508A Reference Multimeter
- Fluke 9640A RF Reference Source
Also available: Fluke 5502A Multi-Product Calibrator
Datasheets & Documents
- Datasheet Fluke 754 Documenting Process Calibrator with HART Datasheet Download
Reviews (0)
How would you rate this product? Cancel reply
About brand
Fluke is the American maker of handheld electronic test tools: digital multimeters, clamp meters, insulation testers, process calibrators, thermometers, vibration meters and power quality analysers. John Fluke founded the John Fluke Engineering Company in Springdale, Connecticut, in June 1948 and moved it to Seattle in 1952. Fluke is headquartered in Everett, Washington, was acquired by Danaher in 1998 and has been part of Fortive since Fortive's spin-off from Danaher in 2016.
Seven Star LLC lists Fluke process calibrators, electrical test tools and bench calibrators, and sources them for maintenance teams and calibration laboratories in Oman.
Fluke company profile
| Founded | June 1948, Springdale, Connecticut, USA, as the John Fluke Engineering Company |
|---|---|
| Founder | John M. Fluke Sr. |
| Headquarters | Everett, Washington, USA (moved to the Seattle area in 1952) |
| Ownership | Danaher from 1998; part of Fortive (NYSE: FTV) since July 2016 |
| Product families | Digital multimeters and clamp meters, insulation resistance testers, process and loop calibrators, infrared thermometers and thermal imagers, vibration meters, power quality analysers, Fluke Calibration laboratory standards |
Milestones
- 1948: John Fluke starts the company in Springdale, Connecticut.
- 1952: The company moves to Seattle
- 1987: A joint venture with Philips leads to the ScopeMeter handheld oscilloscope.
- 1998: Danaher acquires Fluke.
- 2016: Fluke becomes part of Fortive, spun off from Danaher in July.
Fluke calibrators and test tools listed
The main Fluke products on this page fall into three groups, besides other test tools such as further multimeters, a thermometer, an anemometer, a vibration tester and a portable appliance tester:
- Process tools: the 754 documenting process calibrator with HART, 789 ProcessMeter, 721 dual sensor pressure calibrator and 729 automatic pressure calibrator
- Electrical test: the 376 FC true-RMS clamp meter with iFlex probe and the 1587 FC insulation multimeter
- Fluke Calibration bench standards: 5522A, 5502A, 5500A and 5080A multi-product calibrators, the 5720A multifunction calibrator, 8508A reference multimeter, 6100A electrical power standard and 9640A RF reference source
Several of the bench models belong to earlier generations. When a model is no longer produced, we check the manufacturer's documentation and propose the successor it names.
Where Fluke instruments are used
Fluke process calibrators are used for loop checks, transmitter calibration and valve tests in oil and gas, power and water plants. Clamp meters and insulation testers serve electrical maintenance on motors, switchgear and cables. The bench calibrators and reference multimeters are the working standards of electrical calibration laboratories in the GCC, where they calibrate multimeters, clamp meters, process tools and power analyzers.
Fluke products we list
Ordering Fluke instruments: what we need
Send the exact model with its suffix, since versions differ. A Fluke 721, for example, is defined by its two pressure ranges, and a 729 by its maximum pressure. For bench calibrators, list the options you need, such as oscilloscope calibration or power quality options, the line voltage, and the type of calibration certificate you require from the manufacturer. For Fluke multimeters and clamp meters, add the kit contents wanted, such as probes, leads or cases.
Frequently requested Fluke models: Fluke 5522A Multi-Product Calibrator.
Facts checked against published histories of Fluke Corporation and Fortive, October 2026.
Browse Fluke products by category: Portable Test & Measurement.
FAQ
Questions about the Fluke 754 Documenting Process Calibrator with HART
Answers from our engineering team on installation, compatibility and integration.
01Does the Fluke 754 include HART communication?
Yes, the 754 has integrated HART communication, allowing direct calibration and diagnostics of HART smart transmitters without a separate communicator.
02Can the Fluke 754 measure pressure?
Yes, with one of 28 available interchangeable pressure modules, the 754 can source and measure pressure directly, with basic accuracy to 0.05%.
03What signals can the 754 measure and source?
The 754 measures and sources DC voltage, DC current, resistance, frequency, and thermocouple/RTD temperature signals.
04Does the 754 document calibration results?
Yes, it supports automated calibration procedures with as-found/as-left results logging, transferable to a PC via USB for record keeping.
05Where can I buy a genuine Fluke 754 in Oman?
Seven Star LLC is an experienced supplier of Fluke in Oman and the GCC, supplying genuine 754 calibrators and pressure modules.


















Reviews
There are no reviews yet.