- Automation & ControlView all 2,859 products
- Automation Accessories
- AC Drives
- PLC & I/O Cards
- Industrial Communications
- Vibration Monitoring
- Controllers & Data Acquisition
- Isolator & Barrier
- Safety Switches & Guard Locking
- Motor Soft Starters
- CCTV & Security
- Encoders
- Pneumatic Cylinders
- HMI Displays
- Servo Drives
- Industrial Computers
- Machine Vision
- Automation Software
- Robotics
Brand: Beamex
Beamex 8003180 PGPH Full Service Seal Kit
Description
Beamex 8003180 PGPH full service seal kit overview
The Beamex 8003180 is the full service seal kit for the PGPH pneumatic calibration pump (-0.95 to 140 bar). It contains all the seals the pump needs, as well as the selector lock and spring for the pressure/vacuum selector.
The seals are packed in nine numbered bags, each marked for the part of the pump it serves, and a leaflet showing the procedure is included in the delivery.
This page describes Beamex 8003180 for buyers who need the exact order code. Seven Star LLC is an independent supplier serving Oman and the GCC and is not affiliated with the manufacturer.
Key features of the PGPH full service seal kit
- Complete seal set for the PGPH pump
- Selector lock and spring for the pressure/vacuum selector included
- Nine numbered bags, one per pump section
- Leaflet with disassembly and reassembly steps included
Standard delivery and contents according to Beamex:
- Nine bags of seals and O-rings
- Selector lock and spring for the pressure/vacuum selector
- Service leaflet
Technical specifications of Beamex 8003180
| Order code | 8003180 |
|---|---|
| Fits | Beamex PGPH pneumatic calibration pump, -0.95 to 140 bar |
| Bag 1 | Low pressure piston |
| Bag 2 | High pressure piston |
| Bag 3 | Seals between high and low pressure sections |
| Bag 4 | Low pressure check valve |
| Bag 5 | High pressure check valve |
| Bag 6 | Pressure selector |
| Bag 7 | Fine adjust piston |
| Bag 8 | Shut-off valve shaft |
| Bag 9 | Connections between sections inside the pump |
| Tools named in leaflet | 4 mm hex key, Torx 10 screwdriver, 19, 23 and 27 mm spanners, pointed pliers |
All values are taken from Beamex documentation. Items not shown here are not stated in the manufacturer source and are therefore left out.
Typical applications in Oman and the GCC
Hand pumps and electric pumps in calibration workshops wear over time because seals and O-rings are consumables. Maintenance teams in oil and gas, power, water and manufacturing sites across Oman and the GCC keep service kits such as the PGPH full service seal kit (8003180) so that a pump that has lost pressure holding ability can be restored without waiting for a replacement unit.
Buyers often search for the exact order code because the right kit depends on the model and on the generation of the pump. Quoting 8003180 with your request avoids mix-ups between similar pumps.
Selection and compatibility notes for 8003180
Select the kit by pump model first, then confirm the order code. Beamex lists separate kits for different pumps and sometimes for different generations of the same pump, so only 8003180 should be used with the pump named on this page.
Check the contents against the work you need to do. Some kits cover only part of a pump, while others are full service kits. If in doubt, read the maintenance section of the relevant Beamex manual before ordering.
Installation and commissioning
Depressurize the pump and disconnect all hoses before starting. Work on a clean surface, lay out the removed parts in order and compare them with the new parts. Use only the tools named in the Beamex documentation.
Lightly grease seals only where the manual says so, refit parts in the reverse order of removal and leak-test the pump at low pressure before returning it to service. Keep the manual for 8003180 at hand during the work.
Maintenance and care
Store unused kits in a clean dry place in their packaging. After servicing, record the date so the next service interval is easy to plan.
Do not mix old and new seals in the same assembly. Replace all parts the manual tells you to replace in one session.
Related products and ordering notes
Beamex lists these related items, each with its own order code:
- 8003315 transport case for PGPH
- 9010180 PGPH pneumatic calibration pump
- 8003171 PGPH fine adjust
- 8003172 PGPH shut-off valve
Beamex is a Finnish maker of calibration equipment, and its manuals and product pages are the reference for every figure on this page. Always check the manufacturer’s current documentation before putting any accessory or spare part into service.
Seven Star LLC works with industrial maintenance, procurement and calibration teams, so requests that include the full order code, the quantity and the delivery location can be answered quickly. Order codes are often the only reliable way to separate similar-looking accessories from different product generations.
Plants in the region usually plan calibration work around shutdowns, turnarounds and seasonal maintenance windows. Ordering accessories and spare parts well before the work starts avoids waiting for a missing seal, hose or cable when the plant is already offline, and it is cheaper than expediting a single item at the last minute.
Good calibration practice also depends on traceability. Records of the reference equipment, its certificate, the environmental conditions and the as-found and as-left results are what auditors and clients ask for. Accessories do not replace the calibration of the reference itself, but a worn hose, a leaking seal or a damaged cable can spoil an otherwise good measurement, which is why consumables should be replaced on a schedule rather than only after a failure.
When you compare quotations, make sure the order code is identical. Calibration accessories from the same manufacturer often differ only by thread, length or pressure rating, and a similar-looking item with a different code may not be compatible with your equipment. Keep the code on the purchase order, the goods receipt note and the maintenance record so that the same item can be reordered later.
Frequently asked questions about 8003180
What is in the 8003180 kit? All seals needed for the PGPH pump in nine numbered bags, plus the selector lock and spring for the pressure/vacuum selector.
Is a procedure included? Yes. A leaflet is supplied that shows the disassembly and the location of every seal.
Which tools does the leaflet mention? A 4 mm hex key, Torx 10 screwdriver, 19, 23 and 27 mm spanners and pointed pliers.
Which pump uses it? The Beamex PGPH, a hand-operated pneumatic pump for -0.95 to 140 bar.
Who should perform the service? Beamex notes that detailed instructions are in the leaflet and manual. Follow them closely and ensure the pump is depressurized first.
Documents and quotation
The official Beamex PGPH Full Service Seal Kit instructions is attached to this page as a PDF. This dedicated Beamex instruction sheet explains step by step how the PGPH Full Service Seal Kit is fitted. Send us the order code 8003180 and the serial number of your instrument and we will confirm fit and lead time in a written quotation.
Quote Beamex 8003180 exactly as written when you contact us, so that the correct item is quoted the first time. Delivery to Oman and to other GCC countries is arranged for each order, and any questions about packaging, documentation or alternative items can be raised in the same message.
Datasheets & Documents
- Datasheet Beamex PGPH Full Service Seal Kit Instructions (official PDF) Download
Reviews (0)
How would you rate this product? Cancel reply
About brand
Beamex is a Finnish maker of calibration equipment and software for process instruments. Four calibration technicians founded the company in 1975 because they could not find the equipment they wanted; their first product was a voltage and current simulator, and the first factory opened in 1977. Beamex is headquartered in Pietarsaari (Jakobstad), Finland, and supplies process industries in more than 100 countries.
Seven Star LLC is an independent supplier listing Beamex documenting calibrators, temperature dry blocks, pressure controllers, calibration pumps and pressure modules for buyers in Oman and the GCC. Equipment is quoted against the model and the pressure or temperature ranges required.
Beamex company profile
| Origin | Founded in 1975 in Finland by four calibration technicians; first factory 1977 |
|---|---|
| Headquarters | Pietarsaari (Jakobstad), Finland; ISO 9001 certified since 1992 |
| Product families | MC series multifunction calibrators, temperature dry blocks, automatic and hand pressure generators, external pressure modules, CMX and LOGiCAL calibration software |
| Typical duty | Field and workshop calibration of pressure, temperature and electrical signal instruments, including HART and fieldbus transmitters |
Milestones
- 1975: Four calibration technicians found the company in Finland.
- 1977: The first factory opens.
- 1992: ISO 9001 certification.
Beamex calibrators and accessories
| Model | Type | Typical use |
|---|---|---|
| MC6 | Advanced field calibrator and communicator | Pressure, temperature and electrical calibration with a built-in HART, FOUNDATION Fieldbus and PROFIBUS PA communicator, documented results |
| MC6-Ex | Intrinsically safe field calibrator | Calibration inside Zone 0 and Zone 1 hazardous areas without a hot work permit |
| MC6-T | Temperature calibrator with integrated dry block | Temperature sensors and transmitters, with multifunction electrical and pressure measurement |
| MC4, MC2 | Documenting and hand-held process calibrators | Routine loop, transmitter and switch checks in the field |
| FB, MB | Field and metrology temperature dry blocks | FB for field calibration; MB for higher-accuracy workshop and laboratory work |
| ePG, POC8 | Electric pressure pump and automatic pressure controller | Automated pressure calibration; POC8 for workshop calibration benches |
| PGC, PGM, PGL, PGPH, PGHH | Hand pressure pumps | Pressure and vacuum generation in the field, from low pressure (PGL, ±400 mbar) to hydraulic 700 bar (PGHH) |
| EXT modules | External pressure modules | Extending MC calibrators to additional ranges, 70 kPa to 100 MPa |
Where Beamex equipment is used
Instrument workshops and maintenance teams in oil and gas, refining, petrochemicals, power, water and pharmaceuticals use Beamex calibrators to verify transmitters, switches, gauges and temperature sensors. Documenting calibrators send results to calibration software, which keeps the audit trail required by quality systems and custody transfer metering procedures. Intrinsically safe models are used for in-situ calibration in classified areas.
Ordering Beamex equipment: what we need
State the model and the options you need: internal and external pressure ranges, temperature range, communication protocols (HART, FOUNDATION Fieldbus, PROFIBUS PA), Ex approval, and whether an accredited calibration certificate is required. For spare modules and pumps send the serial number of the calibrator they will be used with, so compatibility can be confirmed.
Facts checked against Beamex company history and product information, October 2026.
Browse Beamex products by category: Portable Test & Measurement, Temperature Instrumentation.
FAQ
Questions about the Beamex 8003180 PGPH Full Service Seal Kit
Answers from our engineering team on installation, compatibility and integration.
01What is in the 8003180 kit?
All seals needed for the PGPH pump in nine numbered bags, plus the selector lock and spring for the pressure/vacuum selector.
02Is a procedure included?
Yes. A leaflet is supplied that shows the disassembly and the location of every seal.
03Which tools does the leaflet mention?
A 4 mm hex key, Torx 10 screwdriver, 19, 23 and 27 mm spanners and pointed pliers.
04Which pump uses it?
The Beamex PGPH, a hand-operated pneumatic pump for -0.95 to 140 bar.
05Who should perform the service?
Beamex notes that detailed instructions are in the leaflet and manual. Follow them closely and ensure the pump is depressurized first.


















Reviews
There are no reviews yet.