Brand:

Fluke 717 30G Pressure Calibrator, 30 psi

Description

717 30G low-pressure calibrator with 0.001 psi resolution

The Fluke 717 30G is a handheld pressure calibrator with an internal 30 psig sensor, intended for low-pressure work where finer resolution matters: air handling, instrument air regulators, burner gas pressure and draft or purge systems. It measures -12 to 30 psi (-83 to 207 kPa) with 0.001 psi resolution, measures milliamps at 0.025 % while sourcing 24 V loop power, and accepts 29 Fluke 700Pxx modules for other ranges. Seven Star LLC supplies the 717 30G in Oman and the GCC as an independent supplier in Muscat, not affiliated with the manufacturer.

The 30G sensor shares the body and electronics of the 717 100G but differs in range and resolution. The number 30 is the range in psi and G means gauge pressure.

717 30G technical specifications

Parameter Specification
Manufacturer / part number Fluke / 717 30G
Pressure range -12 psi to 30 psi (-83 kPa to 207 kPa)
Resolution 0.001 psi (0.01 kPa)
Accuracy 0.05 % of full scale, 18 °C to 28 °C, one year
Media Non-corrosive gases and liquids
Pressure connection 1/8 NPT
Pressure modules 29 Fluke 700Pxx modules; accuracy up to 0.025 % of full span, per module
mA measure 0 to 24 mA, 0.001 mA, 0.025 % + 1 count
Loop supply 24 V dc, 10 %; drives 20 mA into 1000 Ω with battery above 6.8 V
Functions Zero, min, max, hold, damp; eleven engineering units
Battery One 9 V alkaline, 4 to 20 hours typical
Size / weight 187 x 87 x 32 mm / 330 g (600 g with holster and FlexStand)
Operating temperature -10 °C to 55 °C
Warranty Three years

Why resolution matters at 30 psi

With 0.001 psi resolution, the 717 30G shows differences that the 100 psi sensor cannot display. On a 5 psi regulator, for example, a change of 0.01 psi is ten digits on the 30G but only one digit on the 100G. Accuracy is given as a percentage of full scale, so at 30 psi the specification is 0.05 % of 30 psi, about 0.015 psi, which is tighter in absolute terms than at 100 psi. A calibrator with the right range for the job reduces the uncertainty of the final result.

The damp function averages readings to calm a display on a moving pressure, and min and max catch short pressure peaks such as the lift of a relief valve.

Using the 717 30G with transmitters and switches

Connect the pressure source to the 1/8 NPT port, wire the transmitter loop through the milliamp terminals so the calibrator supplies the 24 V and measures the current, and step through points at 0, 25, 50, 75 and 100 % of the transmitter span. For pressure switches, raise or lower pressure slowly and note the set and reset values from the display, using hold or min/max to capture the point at which the switch changes state. A hand pump with a fine vernier gives better control for low-pressure tests.

Comparison with other Fluke pressure calibrators

The 717 range is the compact, pump-free choice. The 718 range adds an integrated pump with protected valves, while the 719Pro uses an electric pump for one-handed pressurising. In the 717 range, the other ranges listed in the family comparison include 100G, 300G, 500G, 1000G, 1500G, 3000G and 5000G, along with a 1G low-range model. For the 30 psi class, the 717 30G and 718 30G share the same range and resolution, so the decision is between a lighter instrument and one with its own pump.

Model Range Resolution Pump Weight
717 30G -12 to 30 psi 0.001 psi No pump 330 g
718 30G -12 to 30 psi 0.001 psi Integrated pump 992 g with holster
719Pro-30G -12 to 30 psi 0.001 psi Electric pump 1.2 kg with holster

Selecting the 717 30G

  • Choose the 717 30G when your devices operate below 30 psi (about 2 bar).
  • Use the 717 100G for higher pressures where 0.01 psi resolution is adequate.
  • Use a 700Pxx module for ranges below 5 psi or for different media.
  • Check that you have a suitable hand pump and hoses, since no pump is built in.
  • Keep spare 9 V batteries.

Use and maintenance of the 717 30G

Zero before each calibration with the port vented to atmosphere. Do not exceed the stated overpressure of the sensor and do not apply aggressive media. The unit has a protective holster with a stand so it can stand on a bench or hang from a rail. Replace the battery when low-battery warnings appear, since the 24 V loop supply needs sufficient battery voltage to drive 20 mA into 1000 Ω. Plan periodic calibration in line with your quality system.

Typical applications of the 717 30G in Oman and the GCC

Low-pressure calibration is common in HVAC, cleanrooms, boiler and burner management systems, instrument air and gas blanketing. The 717 30G is used by technicians in utilities, power, oil and gas and desalination plants for transmitter and switch checks at low pressures. It is light enough to carry up to rooftop plant, and its 55 °C operating limit suits most field conditions if it is shaded.

Information to send with an RFQ for the 717 30G

  • Part number 717 30G
  • Quantity and pump, hose or module accessories
  • Pressure ranges, media and connections
  • Delivery location and time frame
  • Calibration certificate requirement

Storage, handling and spares for the Fluke 717 30G

Keep the Fluke 717 30G in its carrying case when it is not in use, and store it in a clean, dry place. Remove or charge the batteries as recommended in the user manual before long storage. Field teams in Oman and the GCC should avoid leaving the instrument in a vehicle in the sun, as high cabin temperatures can exceed the storage range and shorten battery life.

  • Check the instrument, cables, hoses or lenses for damage before each job.
  • Clean the unit with a soft, slightly damp cloth only; do not use solvents unless the manual allows them.
  • Plan a calibration interval that matches your quality system, and keep the calibration certificate with the asset record.
  • Order wear parts and accessories, such as batteries, test leads, hoses or adapters, together with the instrument.

For calibration and test work, it helps to state in your RFQ whether you need an accredited calibration certificate with the Fluke 717 30G, so the right documents can be confirmed with the quotation.

Documents and quotation

A datasheet covering the 717 30G and 717 100G is attached on this page.

Send us the part number 717 30G and the quantity and we will confirm availability and a quotation.

Other Models in the Fluke 717 718 Pressure Range

Seven Star LLC supplies models from the Fluke 717 718 Pressure range in Oman and the GCC. Compare the related models below and request a quote for the one that matches your application.

ModelCategory
Fluke 717 100G Pressure Calibrator, 100 psiProcess, Pressure & Temperature CalibratorsView details
Fluke 718 100G Pressure Calibrator with Pump, 100 psiProcess, Pressure & Temperature CalibratorsView details
Fluke 717 30G Pressure Calibrator, 30 psiProcess, Pressure & Temperature CalibratorsYou are viewing this model
Datasheets & Documents
Reviews (0)

Reviews

There are no reviews yet.

How would you rate this product?

It takes about 10 seconds — just tap a star. Your email is never published.

About brand

Fluke is the American maker of handheld electronic test tools: digital multimeters, clamp meters, insulation testers, process calibrators, thermometers, vibration meters and power quality analysers. John Fluke founded the John Fluke Engineering Company in Springdale, Connecticut, in June 1948 and moved it to Seattle in 1952. Fluke is headquartered in Everett, Washington, was acquired by Danaher in 1998 and has been part of Fortive since Fortive's spin-off from Danaher in 2016.

Seven Star LLC lists Fluke process calibrators, electrical test tools and bench calibrators, and sources them for maintenance teams and calibration laboratories in Oman.

Fluke company profile

Founded June 1948, Springdale, Connecticut, USA, as the John Fluke Engineering Company
Founder John M. Fluke Sr.
Headquarters Everett, Washington, USA (moved to the Seattle area in 1952)
Ownership Danaher from 1998; part of Fortive (NYSE: FTV) since July 2016
Product families Digital multimeters and clamp meters, insulation resistance testers, process and loop calibrators, infrared thermometers and thermal imagers, vibration meters, power quality analysers, Fluke Calibration laboratory standards

Milestones

  • 1948: John Fluke starts the company in Springdale, Connecticut.
  • 1952: The company moves to Seattle
  • 1987: A joint venture with Philips leads to the ScopeMeter handheld oscilloscope.
  • 1998: Danaher acquires Fluke.
  • 2016: Fluke becomes part of Fortive, spun off from Danaher in July.

Fluke calibrators and test tools listed

The main Fluke products on this page fall into three groups, besides other test tools such as further multimeters, a thermometer, an anemometer, a vibration tester and a portable appliance tester:

  • Process tools: the 754 documenting process calibrator with HART, 789 ProcessMeter, 721 dual sensor pressure calibrator and 729 automatic pressure calibrator
  • Electrical test: the 376 FC true-RMS clamp meter with iFlex probe and the 1587 FC insulation multimeter
  • Fluke Calibration bench standards: 5522A, 5502A, 5500A and 5080A multi-product calibrators, the 5720A multifunction calibrator, 8508A reference multimeter, 6100A electrical power standard and 9640A RF reference source

Several of the bench models belong to earlier generations. When a model is no longer produced, we check the manufacturer's documentation and propose the successor it names.

Where Fluke instruments are used

Fluke process calibrators are used for loop checks, transmitter calibration and valve tests in oil and gas, power and water plants. Clamp meters and insulation testers serve electrical maintenance on motors, switchgear and cables. The bench calibrators and reference multimeters are the working standards of electrical calibration laboratories in the GCC, where they calibrate multimeters, clamp meters, process tools and power analyzers.

Fluke products we list

Family Examples
Portable Test & Measurement 117 Electrician’s True-rms Multimeter with, 1507 Insulation Resistance Tester, 1550C 5 kV Insulation Resistance Tester, 1587 FC Insulation Multimeter, 376 FC True-RMS AC/DC Clamp Meter with iFlex, 5080A Multi-Product Calibrator, 5500A Multi-Product Calibrator, 5502A Multi-Product Calibrator and 17 more
Lubrication & Bearing Maintenance 805 FC Vibration Meter

Ordering Fluke instruments: what we need

Send the exact model with its suffix, since versions differ. A Fluke 721, for example, is defined by its two pressure ranges, and a 729 by its maximum pressure. For bench calibrators, list the options you need, such as oscilloscope calibration or power quality options, the line voltage, and the type of calibration certificate you require from the manufacturer. For Fluke multimeters and clamp meters, add the kit contents wanted, such as probes, leads or cases.

Frequently requested Fluke models: Fluke 5522A Multi-Product Calibrator.

Facts checked against published histories of Fluke Corporation and Fortive, October 2026.

FAQ

Questions about the Fluke 717 30G Pressure Calibrator, 30 psi

Answers from our engineering team on installation, compatibility and integration.

01What range does the Fluke 717 30G cover?
The 717 30G covers -12 psi to 30 psi, equal to -83 kPa to 207 kPa, with 0.001 psi resolution and 0.05 % of full scale accuracy.
02What is the resolution of the Fluke 717 30G?
The resolution is 0.001 psi or 0.01 kPa, which is ten times finer than the 0.01 psi resolution of the 717 100G sensor, helping on low-pressure regulators.
03Does the Fluke 717 30G measure mA?
Yes. It measures 0 to 24 mA at 0.001 mA resolution with 0.025 % + 1 count accuracy and can supply 24 V loop power to drive a transmitter.
04Does the Fluke 717 30G have an internal pump?
No. It needs an external hand pump or pressure source. Fluke lists separate test pumps for use with the 700 series modules and 710 and 720 series calibrators.
05What power does the Fluke 717 30G use?
It uses a single 9 V alkaline battery that lasts 4 to 20 hours, depending on functions used. It is supplied with a protective yellow holster with a stand.