Brand:

Fluke 712B RTD Temperature Calibrator

Description

712B RTD temperature calibrator for Pt100 and other resistance sensors

The Fluke 712B is a single-function RTD temperature calibrator. It measures and simulates thirteen RTD types and resistance, measures 4 to 20 mA while it sources a temperature signal, and is built for technicians who calibrate platinum and nickel temperature transmitters and indicators. It is paired in the datasheet with the 714B, which does the same job for thermocouples. Seven Star LLC supplies the 712B in Oman and the GCC as an independent supplier in Muscat, not affiliated with the manufacturer.

The ordering list shows “FLUKE-712B Temperature Calibrator”. The suffix B marks the current generation; the first two digits indicate the 71X temperature calibrator family.

712B technical specifications

Parameter Specification
Manufacturer / part number Fluke / 712B
RTD types 13 types including Pt100 (385, 3916, 3926), Pt10, Pt50, Pt200, Pt500, Pt1000, Ni120, Cu10, Cu50, Cu100 and YSI 400
Pt100 (385) accuracy 0.2 °C from -200 °C to 100 °C; 0.015 % + 0.18 °C from 100 °C to 800 °C (1-year, measure and source)
RTD resolution 0.1 °C
Ohms measure 0 to 400 Ω : 0.015 % + 0.05 Ω; 400 to 4000 Ω: 0.015 % + 0.5 Ω
Ohms source 1 to 4000 Ω with excitation current from 0.05 mA to 3 mA depending on range, 0.015 % + 0.05 to 0.5 Ω
3-wire measurement Add 0.4 °C for most RTD types if the three leads are matched
DC mA measure 0 to 24 mA, 0.001 mA resolution, 0.010 % + 2 µA
Dual inputs / display Measure mA while sourcing temperature; backlit display
Source functions Configurable 0 % and 100 % points, linear ramp and 25 % step
Pulsed transmitters Supports pulse times as short as 5 ms
Calibration basis One-year cycle, +18 °C to +28 °C, 5 minute warm-up; 1-year and 2-year specifications
Maximum voltage 30 V between any terminals or to earth
Operating / storage temperature -10 °C to 50 °C / -30 °C to 60 °C
IP rating / drop IP52 / 1 m
Batteries Four AA alkaline
Size / weight 52.5 x 84 x 188.5 mm / 515 g
Supplied with Magnetic hanging tool, batteries, manual, traceable calibration certificate, test leads

How the 712B simulates and measures an RTD

An RTD changes resistance with temperature. In measure mode the calibrator passes a small excitation current through the sensor and reads the voltage; four-wire connection gives the quoted accuracy because lead resistance drops out. In source mode the 712B produces the resistance that a sensor would present at a chosen temperature, so a transmitter or controller can be tested without a heat source. The excitation current from the device under test must fall within the supported range, from 0.05 mA to 3 mA depending on resistance, and the datasheet notes support for pulsed transmitters with pulse times down to 5 ms.

RTD accuracy depends on the sensor type. Low-resistance types such as Pt10 and Cu10 have wider tolerances, 1.5 °C at 1 year over the lower band, while Pt100, Pt200 and Pt1000 are within 0.2 °C from -200 °C to 100 °C. Nickel Ni120 is quoted at 0.15 °C over -80 °C to 260 °C. These values exclude sensor inaccuracy, so the uncertainty of the probe in the process must be added separately.

712B compared with the 714B

The two calibrators share their body, dual inputs, mA measurement and linear ramp functions. The difference is the sensor type. The 714B handles seventeen thermocouple types and millivolts with 0.015 % + 10 µV accuracy, while the 712B handles RTDs and ohms. If a plant has both, buy one of each. Neither measures voltage in volts, pressure or frequency; for those, a multifunction calibrator like the 725 or 726 is needed.

Model Sensor input Typical use
712B 13 RTD types and ohms Pt100 and Pt1000 transmitters, resistance thermometers
714B 17 thermocouple types and mV Type K, J, T, N and S thermocouple transmitters

Selecting the 712B

  • Confirm that your RTDs are among the thirteen supported types, including the alpha value.
  • Decide whether 4-wire, 3-wire or 2-wire connections will be used and account for the 3-wire correction.
  • Check the excitation current of the instrument under test against the supported range.
  • Use the 714B for thermocouple instruments and a multifunction calibrator if you need both.
  • Remember the 30 V maximum on inputs.

Use and maintenance of the 712B

Allow five minutes of warm-up before accurate work and keep the calibrator out of direct sun. Use the hanging tool to put the unit where you can see it while your hands handle the cabinet. Check the batteries before a long job. Recalibrate on the schedule in your quality system; the specifications are based on a one-year cycle, with two-year values also given. The unit comes with a traceable calibration certificate, which is the starting point of its calibration history.

Typical applications of the 712B in Oman and the GCC

Plants use the 712B to calibrate Pt100 transmitters on bearings, process lines and heat exchangers, to test temperature controllers and recorders, and to check RTD input cards on PLC and DCS systems. In hot outdoor areas, take care that the calibrator itself stays within its 50 °C operating limit, and let it settle before critical checks.

Information to send with an RFQ for the 712B

  • Part number 712B
  • Quantity
  • RTD types and ranges to be calibrated
  • Delivery location and time frame
  • Calibration certificate requirement

Storage, handling and spares for the Fluke 712B

Keep the Fluke 712B in its carrying case when it is not in use, and store it in a clean, dry place. Remove or charge the batteries as recommended in the user manual before long storage. Field teams in Oman and the GCC should avoid leaving the instrument in a vehicle in the sun, as high cabin temperatures can exceed the storage range and shorten battery life.

  • Check the instrument, cables, hoses or lenses for damage before each job.
  • Clean the unit with a soft, slightly damp cloth only; do not use solvents unless the manual allows them.
  • Plan a calibration interval that matches your quality system, and keep the calibration certificate with the asset record.
  • Order wear parts and accessories, such as batteries, test leads, hoses or adapters, together with the instrument.

For calibration and test work, it helps to state in your RFQ whether you need an accredited calibration certificate with the Fluke 712B, so the right documents can be confirmed with the quotation.

Documents and quotation

A datasheet for the 712B and 714B is attached on this page.

Send us the part number 712B and the quantity and we will confirm availability and a quotation.

Other Models in the Fluke 71xb Calibrator Range

Seven Star LLC supplies models from the Fluke 71xb Calibrator range in Oman and the GCC. Compare the related models below and request a quote for the one that matches your application.

ModelCategory
Fluke 712B RTD Temperature CalibratorProcess, Pressure & Temperature CalibratorsYou are viewing this model
Fluke 714B Thermocouple Temperature CalibratorProcess, Pressure & Temperature CalibratorsView details
Datasheets & Documents
Reviews (0)

Reviews

There are no reviews yet.

How would you rate this product?

It takes about 10 seconds — just tap a star. Your email is never published.

About brand

Fluke is the American maker of handheld electronic test tools: digital multimeters, clamp meters, insulation testers, process calibrators, thermometers, vibration meters and power quality analysers. John Fluke founded the John Fluke Engineering Company in Springdale, Connecticut, in June 1948 and moved it to Seattle in 1952. Fluke is headquartered in Everett, Washington, was acquired by Danaher in 1998 and has been part of Fortive since Fortive's spin-off from Danaher in 2016.

Seven Star LLC lists Fluke process calibrators, electrical test tools and bench calibrators, and sources them for maintenance teams and calibration laboratories in Oman.

Fluke company profile

Founded June 1948, Springdale, Connecticut, USA, as the John Fluke Engineering Company
Founder John M. Fluke Sr.
Headquarters Everett, Washington, USA (moved to the Seattle area in 1952)
Ownership Danaher from 1998; part of Fortive (NYSE: FTV) since July 2016
Product families Digital multimeters and clamp meters, insulation resistance testers, process and loop calibrators, infrared thermometers and thermal imagers, vibration meters, power quality analysers, Fluke Calibration laboratory standards

Milestones

  • 1948: John Fluke starts the company in Springdale, Connecticut.
  • 1952: The company moves to Seattle
  • 1987: A joint venture with Philips leads to the ScopeMeter handheld oscilloscope.
  • 1998: Danaher acquires Fluke.
  • 2016: Fluke becomes part of Fortive, spun off from Danaher in July.

Fluke calibrators and test tools listed

The main Fluke products on this page fall into three groups, besides other test tools such as further multimeters, a thermometer, an anemometer, a vibration tester and a portable appliance tester:

  • Process tools: the 754 documenting process calibrator with HART, 789 ProcessMeter, 721 dual sensor pressure calibrator and 729 automatic pressure calibrator
  • Electrical test: the 376 FC true-RMS clamp meter with iFlex probe and the 1587 FC insulation multimeter
  • Fluke Calibration bench standards: 5522A, 5502A, 5500A and 5080A multi-product calibrators, the 5720A multifunction calibrator, 8508A reference multimeter, 6100A electrical power standard and 9640A RF reference source

Several of the bench models belong to earlier generations. When a model is no longer produced, we check the manufacturer's documentation and propose the successor it names.

Where Fluke instruments are used

Fluke process calibrators are used for loop checks, transmitter calibration and valve tests in oil and gas, power and water plants. Clamp meters and insulation testers serve electrical maintenance on motors, switchgear and cables. The bench calibrators and reference multimeters are the working standards of electrical calibration laboratories in the GCC, where they calibrate multimeters, clamp meters, process tools and power analyzers.

Fluke products we list

Family Examples
Portable Test & Measurement 117 Electrician’s True-rms Multimeter with, 1507 Insulation Resistance Tester, 1550C 5 kV Insulation Resistance Tester, 1587 FC Insulation Multimeter, 376 FC True-RMS AC/DC Clamp Meter with iFlex, 5080A Multi-Product Calibrator, 5500A Multi-Product Calibrator, 5502A Multi-Product Calibrator and 17 more
Lubrication & Bearing Maintenance 805 FC Vibration Meter

Ordering Fluke instruments: what we need

Send the exact model with its suffix, since versions differ. A Fluke 721, for example, is defined by its two pressure ranges, and a 729 by its maximum pressure. For bench calibrators, list the options you need, such as oscilloscope calibration or power quality options, the line voltage, and the type of calibration certificate you require from the manufacturer. For Fluke multimeters and clamp meters, add the kit contents wanted, such as probes, leads or cases.

Frequently requested Fluke models: Fluke 5522A Multi-Product Calibrator.

Facts checked against published histories of Fluke Corporation and Fortive, October 2026.

FAQ

Questions about the Fluke 712B RTD Temperature Calibrator

Answers from our engineering team on installation, compatibility and integration.

01What does the Fluke 712B calibrate?
The 712B measures and simulates thirteen RTD types and resistance. It is used to calibrate RTD transmitters, controllers, indicators and input cards on control systems.
02How accurate is the Fluke 712B on Pt100?
For Pt100 (385) the datasheet gives 0.2 °C from -200 °C to 100 °C and 0.015 % + 0.18 °C from 100 °C to 800 °C for one-year specifications, sensor error excluded.
03Can the Fluke 712B measure 4 to 20 mA?
Yes. It measures 0 to 24 mA at 0.010 % + 2 microamps while simultaneously sourcing a temperature signal, so transmitter output can be checked in one connection.
04Is a calibration certificate included with the 712B?
The datasheet lists a traceable calibration certificate among the included items, together with a magnetic hanging tool, batteries, test leads and a manual.
05What is the difference between the Fluke 712B and 714B?
The 712B is for RTD and resistance, with 13 RTD types. The 714B is for thermocouples and millivolts, with 17 thermocouple types. Other features are the same.