- Automation & ControlView all 2,466 products
- Automation Accessories
- AC Drives
- PLC & I/O Cards
- Industrial Communications
- Vibration Monitoring
- Controllers & Data Acquisition
- Isolator & Barrier
- CCTV & Security
- Motor Soft Starters
- Encoders
- Safety Switches & Guard Locking
- HMI Displays
- Pneumatic Cylinders
- Servo Drives
- Industrial Computers
- Machine Vision
- Automation Software
- Robotics
Brand: Extech
Extech RPM33 Contact and Laser Photo Tachometer
Description
Extech RPM33 combination contact and laser photo tachometer
The Extech RPM33 is a handheld tachometer that measures rpm in two ways: non-contact with a laser and reflective tape, from up to 500 mm (1.6 ft) away, or by contact with a rubber wheel pressed against the shaft or the surface of a moving belt or conveyor. In contact mode it also reports linear surface speed and length, which makes it useful for conveyors, rolls and wire or cable lines.
A five-digit backlit LCD, a quartz-crystal-controlled microprocessor for accuracy, and a memory that stores 10 data sets with four parameters each (measurement, maximum, minimum and average) complete the instrument. The kit includes the contact wheel, a 9 V battery, reflective tape and a soft case.
Technical specifications of the RPM33
| Parameter | Specification |
|---|---|
| Manufacturer / part number | Extech / RPM33 |
| Photo mode range | 2 to 99,999 rpm |
| Contact mode range | 2 to 20,000 rpm |
| Surface speed (contact) | 0 to 78,720 in/min; 0 to 6560 ft/min; 0 to 2186 yd/min; 0 to 2000 m/min |
| Length (contact) | 3.9 to 39,370 in; 0.3 to 3280 ft; 0.1 to 1093 yd; 0.1 to 1000 m |
| Frequency | 333 Hz |
| Accuracy | 0.05% of reading + 1 digit (photo and contact) |
| Sampling time | 0.5 s above 120 rpm |
| Resolution | 0.1 rpm below 10,000 rpm; 1 rpm above 10,000 rpm |
| Maximum laser distance | 500 mm (1.6 ft) |
| Memory | 10 data sets, each with measurement, max, min and average |
| Dimensions / weight | 160 x 60 x 42 mm (6.2 x 2.3 x 1.6 in) / approx. 151 g |
The figures above are from the RPM33 datasheet.
Contact or laser mode on the RPM33
Laser mode is the first choice when the machine is dangerous to approach or the shaft end is hidden: place a reflective tape strip on the part and aim the beam from a distance. Contact mode is better when the shaft carries no tape and has a clean, accessible end, or when the surface speed is needed. In contact mode the rubber wheel is pressed against the rotating surface; the RPM33 calculates rpm from the wheel turns and converts it to speed or length using the wheel circumference.
Contact mode needs steady pressure and a clean surface to avoid slip, and is limited to 20,000 rpm, while laser mode covers up to 99,999 rpm. The average value stored with each data set is useful when speed varies during a cycle.
Typical uses of the RPM33
- Motors, fans, pumps and gear boxes: non-contact rpm in laser mode.
- Conveyor belts and rolls: surface speed in m/min or ft/min in contact mode.
- Cable, wire and film lines: length measurement for cutting and spooling.
- Flywheels and elevators: contact rpm on accessible shafts.
For a smaller photo-only meter, the Extech 461920 is the compact choice; the RPM33 is selected when contact and laser modes are both needed.
Selection checklist for the RPM33
- Confirm that the speed range of 2 to 99,999 rpm (photo) and 2 to 20,000 rpm (contact) suits the job.
- Decide whether surface speed or length measurement is needed.
- Check that tape can be applied or that the shaft end can be reached by the wheel.
- Plan for spare reflective tape and a spare 9 V battery.
Safe use and care of the RPM33
Stay clear of moving parts, keep loose clothing away, and never aim the laser at eyes. Contact mode should only be used on machines where it is safe to hold a wheel against a moving surface, and not on exposed couplings or pinch points. Replace the 9 V battery when the display dims, clean the contact wheel with a dry cloth, and keep the RPM33 in its soft case.
Applications of the RPM33 in Oman and the GCC
Maintenance and commissioning teams at process plants, utilities and packaging or cable factories use combination tachometers for speed verification on drives and conveyors. In hot, dusty workshops the soft case keeps the optics clean, and in bright sun the shaded tape and a short distance give a stable laser reading.
Making repeatable measurements
For laser readings, use one tape strip and keep the beam at about the same distance each time. In contact mode, hold the meter square to the shaft with moderate pressure; too much pressure slows the machine and too little causes slip. Store each reading in memory with the machine tag number, and compare the averages from visit to visit. If a drive is set to a given frequency, the expected speed can be calculated from the motor pole count, which gives a quick check of the tachometer itself.
Checking a drive set point with the tachometer
A typical check is to compare the indicated speed on a drive display with the measured shaft speed. For a four-pole induction motor on a 50 Hz supply the synchronous speed is 1500 rpm, and the measured speed will be a little lower because of slip. A large difference between measured and expected speed points to a wrong parameter, a slipping belt or a worn coupling, and is worth recording as an observation for follow-up.
Information to send with an RFQ for the RPM33
- Part number RPM33 and the required quantity
- Speed range and whether surface speed or length is needed
- Spare tape or battery needs
- Delivery location in Oman or the GCC and the required lead time
- Whether calibration documentation or a traceable calibration certificate is required
Documents and quotation
A datasheet for the Extech RPM33 is attached on this page. It lists the photo and contact ranges and accuracy.
Send us the part number RPM33, the quantity and the delivery location in Oman or the GCC, and we will reply with availability and a quotation. Seven Star LLC is an independent supplier in Muscat and is not affiliated with the manufacturer.
Other Models in the Extech Tachometers Range
Seven Star LLC supplies models from the Extech Tachometers range in Oman and the GCC. Compare the related models below and request a quote for the one that matches your application.
| Model | Category | |
|---|---|---|
| Extech 461920 Mini Laser Photo Tachometer and Counter | Portable Test & Measurement | View details |
| Extech RPM33 Contact and Laser Photo Tachometer | Portable Test & Measurement | You are viewing this model |
Datasheets & Documents
- Datasheet Extech RPM33 Datasheet Download
Reviews (0)
How would you rate this product? Cancel reply
About brand
Extech Instruments is an American brand of handheld test and measurement instruments, founded in the early 1970s in Waltham, Massachusetts. FLIR Systems acquired Extech in 2007 for about $40 million, and FLIR itself became part of Teledyne in 2021. Extech is based in Nashua, New Hampshire, and makes meters for electrical, environmental and HVAC testing.
Extech company profile
| Founded | Early 1970s, Waltham, Massachusetts |
|---|---|
| Headquarters | Nashua, New Hampshire (since 2011) |
| Ownership | Teledyne FLIR |
| Acquired by FLIR | 2007 |
| Product families | True RMS clamp meters and multimeters, insulation testers, power analysers, IR thermometers, light meters, vibration meters, sound, humidity and air quality meters |
Milestones
- 2007: FLIR Systems acquires Extech.
- 2011: Extech moves to Nashua.
- 2021: FLIR becomes part of Teledyne.
Meters, testers and inspection tools
The Extech range includes multimeters and clamp meters, insulation and resistance testers, power analyzers, thermometers, light and sound level meters, anemometers, tachometers, vibration meters, moisture meters, borescopes and water quality meters. Each datasheet and user manual lists ranges, accuracy, safety category and ordering codes, and many models are listed with NIST-traceable calibration versions ordered by adding -NIST to the part number.
Supply through Seven Star LLC
Seven Star LLC is an independent supplier in Muscat that quotes Extech products for projects in Oman and the GCC, with the official Extech datasheet and user manual attached to each product page.
Extech products we list
Facts checked against FLIR's 2007 announcement and published Extech histories, October 2026.
FAQ
Questions about the Extech RPM33 Contact and Laser Photo Tachometer
Answers from our engineering team on installation, compatibility and integration.
01What measurements does the Extech RPM33 provide?
The RPM33 measures rpm by laser photo or contact, and linear surface speed and length by contact.
02What is the laser range of the RPM33?
The laser mode works up to 500 mm (1.6 ft) from the target using reflective tape.
03What rpm range does the RPM33 cover in contact mode?
In contact mode the range is 2 to 20,000 rpm, while photo mode covers 2 to 99,999 rpm.
04How much data can the RPM33 store?
It stores 10 data sets, each with the measurement, maximum, minimum and average values.
05What accuracy does the RPM33 have?
The accuracy is 0.05% of reading plus 1 digit in both photo and contact mode.


















Reviews
There are no reviews yet.