Brand:

Extech 461920 Mini Laser Photo Tachometer and Counter

Description

Extech 461920 mini laser photo tachometer and counter

The Extech 461920 is a compact non-contact tachometer that measures rotational speed from 2 to 99,999 rpm by pointing a laser at a piece of reflective tape on the rotating part. It also works as a counter up to 99,999 revolutions, remembers the last, minimum and maximum readings, and shows the result on a large five-digit LCD. A rugged double-molded housing gives a firm grip, and the kit includes a 9 V battery and reflective tape.

With a basic accuracy of ±0.05% and a maximum target distance of 500 mm (1.6 ft), the 461920 is a quick way to check fan, motor, pump and shaft speed without touching the machine.

Technical specifications of the 461920

Parameter Specification
Manufacturer / part number Extech / 461920 (461920-NIST includes NIST certificate)
RPM range 2 to 99,999 rpm
Count range 1 to 99,999 revolutions
Basic accuracy ±0.05%
Resolution 0.1 rpm / 1 rev
Maximum target distance 500 mm (1.6 ft)
Memory Min / Max / Last
Display Five-digit LCD
Light source Laser
Power / supplied items 9 V battery and reflective tape
Spare tape 461937, reflective tape strips 23 in each, 10-pack
Dimensions / weight 160 x 60 x 42 mm (6.2 x 2.3 x 1.6 in) / approx. 151 g

The figures above are from the 461920 datasheet.

How a photo tachometer like the 461920 works

A small piece of reflective tape is stuck to the rotating shaft, coupling, fan blade or pulley. The laser beam of the 461920 hits the tape once each revolution and reflects back to the sensor; the meter counts the pulses over a short gate time and calculates revolutions per minute. Because the beam is narrow and the range is up to 500 mm, the meter can be used safely from a distance and on parts that are hard to reach.

For the best results, the tape should be clean and flat, the surface around the tape should be dark or non-reflective, and the beam should hit the tape squarely. On a part with several tapes, the reading would be multiplied, so use one strip only. The memory function retains the last value and recalls the minimum and maximum, which is useful when a machine varies in speed and the technician wants to see the range.

Typical uses of the 461920

  • Fan, pump and motor speed checks after installation or repair.
  • Verification of drive output speed against a variable speed drive setting.
  • Counting revolutions or product pieces on a line using the counter mode.
  • Belt and pulley ratio checks.
  • Quick confirmation of nameplate speed on idle or off-load machines.

For surface speed and length as well as rpm, the Extech RPM33 combines contact and laser modes; the 461920 is the compact photo-only model.

Selection checklist for the 461920

  • Confirm that the speed range of 2 to 99,999 rpm covers your machines.
  • Check that you can place reflective tape on the target and view it from within 500 mm.
  • Decide whether you need surface speed or length (use the RPM33).
  • Order spare reflective tape (461937) for field use.
  • Decide whether a NIST certificate (461920-NIST) is required.

Safe use of the 461920

The laser should never be pointed at eyes, and the user should stay clear of rotating parts. Place the tape only when the machine is stopped and locked out. Do not wear loose clothing near moving machinery. After the test, remove the tape if the surface is sensitive. Replace the 9 V battery when the display dims, keep the lens clean and store the 461920 in a dry place.

Applications of the 461920 in Oman and the GCC

Air-cooled heat exchanger fans, cooling-tower fans, pumps and motors are everywhere in oil and gas, power and water plants in the region, and their speed affects efficiency and flow. A non-contact tachometer lets technicians verify speed on elevated fans from a safe distance and check drive settings after commissioning. Glare from strong sun can disturb the reading, so shade the tape when working outdoors.

Good measuring practice

Take three readings and compare them; a stable value indicates a good reflection. If the reading jumps, clean the tape or adjust the angle slightly. For slow-turning shafts, use a longer reading time by holding the trigger and letting the meter settle. Record the reading with the machine load and the drive setting so that results are comparable over time, and check the meter against a known frequency source, such as a motor on a drive with a known setpoint, from time to time. Keep the tape strips in their original wrapper until needed, because dust on the adhesive makes them lift in hot weather, and replace any strip that has curled or darkened before the next survey.

Information to send with an RFQ for the 461920

  • Part number 461920 and the required quantity
  • Speed range and distance to the target
  • Spare tape (461937) quantity and whether a NIST certificate is needed
  • Delivery location in Oman or the GCC and the required lead time
  • Whether calibration documentation or a traceable calibration certificate is required

Storage, handling and spares for the Extech 461920

Keep the Extech 461920 in its carrying case when it is not in use, and store it in a clean, dry place. Remove or charge the batteries as recommended in the user manual before long storage. Field teams in Oman and the GCC should avoid leaving the instrument in a vehicle in the sun, as high cabin temperatures can exceed the storage range and shorten battery life.

  • Check the instrument, cables, hoses or lenses for damage before each job.
  • Clean the unit with a soft, slightly damp cloth only; do not use solvents unless the manual allows them.
  • Plan a calibration interval that matches your quality system, and keep the calibration certificate with the asset record.
  • Order wear parts and accessories, such as batteries, test leads, hoses or adapters, together with the instrument.

For calibration and test work, it helps to state in your RFQ whether you need an accredited calibration certificate with the Extech 461920, so the right documents can be confirmed with the quotation.

Documents and quotation

A datasheet for the Extech 461920 is attached on this page. It lists the range, accuracy and memory functions.

Send us the part number 461920, the quantity and the delivery location in Oman or the GCC, and we will reply with availability and a quotation. Seven Star LLC is an independent supplier in Muscat and is not affiliated with the manufacturer.

Other Models in the Extech Tachometers Range

Seven Star LLC supplies models from the Extech Tachometers range in Oman and the GCC. Compare the related models below and request a quote for the one that matches your application.

ModelCategory
Extech 461920 Mini Laser Photo Tachometer and CounterPortable Test & MeasurementYou are viewing this model
Extech RPM33 Contact and Laser Photo TachometerPortable Test & MeasurementView details
Datasheets & Documents
Reviews (0)

Reviews

There are no reviews yet.

How would you rate this product?

It takes about 10 seconds — just tap a star. Your email is never published.

About brand

Extech Instruments is an American brand of handheld test and measurement instruments, founded in the early 1970s in Waltham, Massachusetts. FLIR Systems acquired Extech in 2007 for about $40 million, and FLIR itself became part of Teledyne in 2021. Extech is based in Nashua, New Hampshire, and makes meters for electrical, environmental and HVAC testing.

Extech company profile

Founded Early 1970s, Waltham, Massachusetts
Headquarters Nashua, New Hampshire (since 2011)
Ownership Teledyne FLIR
Acquired by FLIR 2007
Product families True RMS clamp meters and multimeters, insulation testers, power analysers, IR thermometers, light meters, vibration meters, sound, humidity and air quality meters

Milestones

  • 2007: FLIR Systems acquires Extech.
  • 2011: Extech moves to Nashua.
  • 2021: FLIR becomes part of Teledyne.

Meters, testers and inspection tools

The Extech range includes multimeters and clamp meters, insulation and resistance testers, power analyzers, thermometers, light and sound level meters, anemometers, tachometers, vibration meters, moisture meters, borescopes and water quality meters. Each datasheet and user manual lists ranges, accuracy, safety category and ordering codes, and many models are listed with NIST-traceable calibration versions ordered by adding -NIST to the part number.

Supply through Seven Star LLC

Seven Star LLC is an independent supplier in Muscat that quotes Extech products for projects in Oman and the GCC, with the official Extech datasheet and user manual attached to each product page.

Extech products we list

Family Examples
Portable Test & Measurement IR400 Mini IR Thermometer with Laser Poi…, LT300 Digital Light Meter, MA445 400 A True RMS AC/DC Clamp Meter w…, MG500 10 kV Digital High Voltage Insulat…, PQ3450 3-Phase Power Analyzer and Datalo…, VB450 Pocket Vibration Meter

Facts checked against FLIR's 2007 announcement and published Extech histories, October 2026.

FAQ

Questions about the Extech 461920 Mini Laser Photo Tachometer and

Answers from our engineering team on installation, compatibility and integration.

01What speed range does the Extech 461920 cover?
The 461920 measures 2 to 99,999 rpm in photo mode, and counts 1 to 99,999 revolutions.
02How far can the 461920 measure from the target?
The maximum target distance is 500 mm (1.6 ft) using the laser and a piece of reflective tape.
03What accuracy does the 461920 have?
The basic accuracy is ±0.05% with a resolution of 0.1 rpm.
04Does the 461920 have memory?
Yes. The memory button holds the last reading and recalls the minimum and maximum readings.
05What is supplied with the 461920?
A 9 V battery and reflective tape are supplied; spare tape is available as part number 461937.