Endress+Hauser 5P1B Promag P 100 Process EM Flowmeter

Description

Endress+Hauser 5P1B Proline Promag P 100 electromagnetic flowmeter for chemical and process duty

The Endress+Hauser 5P1B is a Proline Promag P 100 electromagnetic flowmeter for chemical and process applications with corrosive liquids and high medium temperatures. It is combined with an ultra-compact transmitter that holds full functionality on a small footprint, and nominal diameters run from DN 15 to DN 600 (1/2 to 24 inches).

The liner is made of PTFE or PFA, all common Ex approvals are available, and the sensor housing is aluminum for DN 15 to 300 or coated carbon steel for DN 350 to 600. Protection is IP66/67 type 4X with IP69K available through sensor option CM, and the Endress+Hauser 5P1B has an integrated web server and Heartbeat Technology for verification.

Key features of the 5P1B

  • Nominal diameter DN 15 to 600 (1/2 to 24 inches)
  • PTFE or PFA liner for corrosive liquids and high medium temperatures
  • All common Ex approvals available
  • Ultra-compact transmitter with local display option
  • Maintenance-free measuring principle with no moving parts and no pressure loss
  • Integrated web server and Heartbeat Technology on the 5P1B

5P1B technical specifications

Parameter Value
Product family Proline Promag P 100, type 5P1B
Measuring principle Electromagnetic (Faraday)
Nominal diameter range DN 15 to 600 (1/2 to 24 inches)
Liner PTFE or PFA
Flow velocity Typically 0.01 to 10 m/s (0.03 to 33 ft/s)
Maximum measured error, volume flow Plus or minus 0.5 percent of reading plus or minus 1 mm/s; optionally plus or minus 0.2 percent of reading plus or minus 2 mm/s
Conductivity 5 to 10,000 microsiemens per cm
Supply voltage DC 20 to 30 V
Transmitter ambient temperature Minus 40 to plus 60 degrees C
Degree of protection IP66/67 type 4X; IP69K with sensor option CM
Output 4 to 20 mA HART (active); frequency 0 to 10,000 Hz adjustable
Sensor housing Aluminum (DN 15 to 300); carbon steel with protective varnish (DN 350 to 600)

The data come from the manufacturer Technical Information TI01102 for the 5P1B. The medium temperature by liner type, flange and electrode material depend on the ordering code.

Typical applications in Oman and the GCC

In oil and gas, the 5P1B measures chemical injection, acid, caustic, brine and process water where corrosive but conductive liquids are present. The PTFE or PFA liner and Ex approvals suit the demands of refineries, gas plants and petrochemical sites.

Chemical, fertilizer and process plants in the GCC use the device on corrosive streams, while water and desalination plants use it for dosing and brine lines. Its compact transmitter and small footprint help on crowded pipe racks and skids.

Selection and compatibility notes for the 5P1B

Select the 5P1B for chemical duty with aggressive media and hot liquids. For standard water and wastewater, the Promag W 400 or W 300 are the better fit, and for hygienic lines the Promag H 100. Check the conductivity range of 5 to 10,000 microsiemens per cm, the liner and electrode material against the medium, and the flange standard before requesting a quote for the device.

Installation and commissioning of the 5P1B

Install the 5P1B sensor in a position where the pipe stays completely filled in operation, for example in a rising pipe section, and avoid mounting at the highest point of the line where air collects. Align the flange faces, use the gaskets and grounding rings or grounding connections specified for the liner, and tighten the bolts evenly and in a cross pattern. The measuring principle needs little or no straight inlet run, but the installation notes of the device should be followed for the best result. Connect the supply and signal cables through the glands supplied, keep the transmitter housing closed and sealed, and check that the potential equalisation between the medium, the pipe and the sensor is in place. On start-up of the 5P1B, enter the nominal diameter data, perform a zero-point check with a full, stationary pipe, and confirm the flow direction and the totaliser units.

Maintenance

The 5P1B has no moving parts and does not create a pressure drop, so regular maintenance is modest. Inspect the cable glands, the transmitter housing seal and the grounding connection at the intervals set by your plant routines. Where the process leaves deposits, inspect the electrode area and the liner when the line is opened. Use the built-in diagnostics and the verification functions of the device to check the sensor and the electronics without removing the meter from the line, and save the verification report for your records. Replace seals whenever the flanged joint is opened.

Related products and ordering notes

Related devices include the Promag H 100 (5H1B), the Promag W 400 (5W4B) and the Promag W 300 (5W3B). Grounding rings and flange hardware can be added to the RFQ for the 5P1B.

In short: the device is a Promag P 100 electromagnetic flowmeter for DN 15 to 600 with PTFE or PFA liner and all common Ex approvals. Send an RFQ with the medium and size. When you prepare the enquiry, state the pipe nominal diameter, the medium and its conductivity, the process temperature and pressure, the flange standard, the supply voltage and the output you need. A complete enquiry lets us answer quickly, and it helps to say whether the meter is for custody or billing use, drinking water or a chemical duty, because that changes the liner and approval options.

Before shipment, a flowmeter should be checked for the correct nominal diameter, the right liner and electrode material, undamaged flange faces and a legible nameplate. We recommend that receiving staff compare the nameplate data with the purchase order, keep the protective covers on the flanges until installation, and store the unit in a dry place. If the application involves drinking water or custody transfer, state this in the enquiry so that the matching approvals are requested.

Documents and quotation

The official Endress+Hauser Proline Promag P 100 Technical Information (TI01102D) is attached to this page as a PDF. The front page lists nominal diameters up to DN 600 (24 in), PTFE or PFA liners and all common Ex approvals for corrosive chemical and process liquids, and the Mounting chapter starts on page 33 with the Ordering information on page 56. Quote the 5P1B order code from your nameplate in your request so we can check the configuration before we send a written quotation.

Other Models in the Eh Promag Range

Seven Star LLC supplies models from the Eh Promag range in Oman and the GCC. Compare the related models below and request a quote for the one that matches your application.

ModelCategory
Endress+Hauser 5W4B Promag W 400 Electromagnetic FlowmeterElectromagnetic FlowmetersView details
Endress+Hauser 5P1B Promag P 100 Process EM FlowmeterElectromagnetic FlowmetersYou are viewing this model
Datasheets & Documents
  • PDF Datasheet Endress+Hauser Proline Promag P 100 Technical Information TI01102D (official PDF) Download
Reviews (0)

Reviews

There are no reviews yet.

How would you rate this product?

It takes about 10 seconds — just tap a star. Your email is never published.

About brand

Endress+Hauser makes process measurement instruments for flow, level, pressure, temperature and liquid analysis. Georg H. Endress and Ludwig Hauser started the business in Lörrach, Germany, on 1 February 1953, first selling level meters, and the Endress+Hauser name has been used since 1957. The group is headquartered in Reinach, Switzerland, and has been wholly owned by the Endress family since 1975.

Seven Star LLC is an independent supplier listing Endress+Hauser flowmeters, level and pressure transmitters, temperature assemblies and liquid analysis products for buyers in Oman and the GCC. Instruments are matched from the full order code on the nameplate.

Endress+Hauser company profile

Origin Founded in Lörrach, Germany, on 1 February 1953 by the Swiss engineer Georg H. Endress and Ludwig Hauser
Headquarters Endress+Hauser AG, Reinach (Basel-Landschaft), Switzerland
Ownership Family owned; the Endress family has been the sole shareholder since 1975, and a family charter commits the company to stay family owned
Size About 16,500 employees and sales of about EUR 3.7 billion (2023, as reported by the company)
Product families Proline flowmeters, Micropilot and Levelflex radar, Liquiphant switches, Cerabar and Deltabar pressure, iTEMP and iTHERM temperature, Liquiline and Memosens liquid analysis

Milestones

  • 1953: Georg H. Endress and Ludwig Hauser start the business in Lörrach on 1 February, first selling level meters.
  • 1957: The Endress+Hauser name comes into use.
  • 1975: The Endress family becomes sole shareholder.
  • 2023: About 16,500 employees and sales of about EUR 3.7 billion, as reported by the company.

Endress+Hauser product lines

Line Measuring principle Typical use
Promass F 300, Promass 80F, 83F/84F Coriolis mass flow Direct mass flow and density of liquids and gases, hydrocarbon transfer and chemical dosing
Promag P 300, P 500, H 300, W 400, W 10, 50P Electromagnetic flow Water, wastewater, slurries and other conductive liquids
Prowirl F 200, 72F Vortex flow Steam, gas and low-viscosity liquids
Prosonic Flow 92F, t-mass 65F Ultrasonic and thermal mass flow Water lines; compressed air and industrial gases
Micropilot FMR62, FMR67, FMR60, FMR10B, FMR20, FMR50, FMR52 Free-space radar level, 80 GHz and 26 GHz Tanks, process vessels, silos and open water channels
Levelflex FMP51, FMP50, FMP54, FMP55 Guided wave radar level Level and interface in vessels, separators and bypass chambers
Liquiphant FTL51, Prosonic S FMU90 Vibronic point level; ultrasonic level High and low level alarms, pump protection, open channel flow
Cerabar PMC71B, PMP51B, PMP71, Deltabar PMD78B, PMD75 Pressure and differential pressure Process pressure, hydrostatic level and DP flow
iTEMP TMT82, TMT162, iTHERM TM101, TR66, TR10 Temperature transmitters and thermometers RTD and thermocouple points with thermowells
Liquiline CM444, CM442, Memosens CPS11E, Stamolys reagents Liquid analysis pH, ORP, conductivity, dissolved oxygen and nutrient analysis in water treatment and process

Where Endress+Hauser instruments are used

In Oman and the GCC, Endress+Hauser instruments are common in oil and gas production and processing, refineries and petrochemicals, desalination and water networks, wastewater treatment, power plants and food and beverage plants. Coriolis meters measure hydrocarbon and chemical flows, electromagnetic meters cover water and wastewater, radar transmitters handle tank and silo level, and Liquiline analysers monitor water quality. Proline 300 and 500 flowmeters include Heartbeat Technology for in-situ verification, which reduces the need to remove a meter for checks.

Ordering Endress+Hauser instruments: what we need

The order code on the nameplate (for example PMP71-1QA1S11RDADU) defines every option: measuring range, process connection, materials, output, approvals and display. Send it with the serial number; Endress+Hauser can retrieve the original configuration from the serial number. For a new instrument add the medium, operating and design pressure and temperature, range, line size or tank geometry, process connection, wetted materials, output or protocol (4-20 mA HART, PROFIBUS, FOUNDATION Fieldbus, Modbus) and the hazardous-area approval required. Older models such as Promass 80/83 or Micropilot M are replaced by current Proline or 80 GHz Micropilot devices.

Facts checked against Endress+Hauser company history and product information, October 2026.

FAQ

Questions about the Endress+Hauser 5P1B Promag P 100 Process EM

Answers from our engineering team on installation, compatibility and integration.

01What liner options does the 5P1B have?
The datasheet lists a liner made of PTFE or PFA.
02What sizes can the 5P1B be ordered in?
The nominal diameter range is DN 15 to 600 (1/2 to 24 inches).
03What conductivity range does the 5P1B support?
The datasheet gives 5 to 10,000 microsiemens per cm.
04Is the 5P1B available for hazardous areas?
The datasheet lists all common Ex approvals among the device properties.
05How do I order the 5P1B?
Send an RFQ to Seven Star LLC with part number 5P1B, quantity, nominal diameter, liner and medium, and we reply with availability and a quotation.