Brand:

Eaton M22-KC01 RMQ-Titan Contact Element 1 N/C Base Fixing

Description

M22-KC01 RMQ-Titan contact element, 1 N/C with positive opening

The Eaton Eaton M22-KC01 (catalog number 216382) is a single-pole contact element for the RMQ-Titan M22 system with one normally closed (N/C) contact, screw terminals and base fixing. Its datasheet marks the normally closed contact as a safety function by positive opening according to IEC/EN 60947-5-1. That makes it the correct element for stop and emergency-stop circuits in which the contact must open reliably when the front element is actuated. Seven Star LLC supplies the Eaton M22-KC01 in Oman and the GCC.

In the code, M22 is the RMQ-Titan system, K is the contact element, C marks the base-fixing version, and 01 means no N/O and one N/C contact. The matching normally open element is the M22-KC10, and the alternate catalog number listed is M22-KC01Q.

Eaton M22-KC01 technical specifications

Parameter Specification
Manufacturer / part number Eaton / M22-KC01 (catalog number 216382)
Basic function Contact element for M22 actuators
Contact configuration 1 N/C (normally closed), positive opening
Connection technique Screw terminals
Fixing Base fixing
Degree of protection IP20
Actuator travel (EN 60947-5-1, K.5.4.1) 4.8 mm
Maximum travel 5.7 mm
Minimum force for positive opening 15 N
Rated operational current AC-15 115 V: 6 A; 220/230/240 V: 6 A; 380/400/415 V: 4 A; 500 V: 2 A
Rated operational current DC-13 24 V: 3 A; 42 V: 1.7 A; 60 V: 1.2 A; 110 V: 0.6 A; 220 V: 0.3 A
Rated insulation voltage Ui 500 V
Rated impulse withstand voltage Uimp 6,000 V AC
Overvoltage category / pollution degree III / 3
Max. short-circuit protective device Fuseless: PKZM0-10 or FAZ-B6/1; fuse gG/gL 10 A
Rated conditional short-circuit current Iq 1 kA
Electrical lifespan, AC-15, 230 V 1.6 million operations at 0.5 A; 1 million at 1.0 A; 0.7 million at 3.0 A
Mechanical lifespan More than 5 million operations
Operating frequency Up to 3,600 operations per hour
Terminal capacity 0.75 to 2.5 mm² solid; 0.5 to 2.5 mm² stranded; 0.5 to 1.5 mm² flexible with ferrule
Operating torque, screw terminals Up to 0.8 Nm
Control circuit reliability Failure rate below 10 to the power of -7 at 24 V DC / 5 mA; below 5 x 10 to the power of -6 at 5 V DC / 1 mA
Ambient temperature –25 to +70 °C, open
Shock resistance Above 30 g, 11 ms half-sine, to IEC 60068-2-27
Standards and approvals IEC 60947-5-1; IEC/EN 60947-5; UL 508; CSA-C22.2 No. 14-05 and No. 94-91; CE marking

Positive opening and why it matters for the M22-KC01

Positive opening means that when the actuator is driven to its end position, the contact is forced open by direct mechanical action, even if the contact has welded. The datasheet lists an actuator travel of 4.8 mm, a maximum travel of 5.7 mm and a minimum force for positive opening of 15 N. For a stop button, that is the behaviour that protects people: pressing the button must open the circuit, whatever the contact condition.

This is why the M22-KC01 is specified behind stop and emergency-stop front elements, and the N/O M22-KC10 behind start buttons. A safety circuit also needs a suitable safety relay or controller and a validated design, and the datasheet is only one input to that design.

Ratings and protection of the M22-KC01

Electrical ratings are the same as for the N/O element. AC-15 is 6 A at 115 V and at 220 to 240 V, 4 A at 380 to 415 V and 2 A at 500 V. DC-13 is 3 A at 24 V, 1.7 A at 42 V, 1.2 A at 60 V, 0.6 A at 110 V and 0.3 A at 220 V. The maximum short-circuit protective device is a PKZM0-10 or FAZ-B6/1 breaker, or a 10 A gG/gL fuse, with a conditional short-circuit current of 1 kA.

Electrical life at 230 V AC-15 is 1.6 million operations at 0.5 A, 1 million at 1.0 A and 0.7 million at 3.0 A. Mechanical life exceeds 5 million operations.

Fitting the M22-KC01 into an M22 station

The element clips onto the adapter behind a front element, with up to three elements per enclosure base, as noted in the datasheet. Behind the emergency-stop mushrooms M22-PV and M22-PVT the datasheet limits the total to four single-pole elements, so plan the contact count at design stage.

A typical stop station uses the red flat actuator M22-D-R with an M22-KC01 behind it, and a green M22-D-G with an M22-KC10 for start.

Selecting the M22-KC01: checklist

  • Confirm N/C with positive opening, base fixing and screw terminals.
  • Check the load against the AC-15 and DC-13 values at your control voltage.
  • Check the upstream protection against the 10 A fuse or PKZM0-10 limit.
  • Count how many contacts the station needs and respect the per-base limit.
  • Confirm that the safety design, not only the element, meets the standard your machine requires.

Installation and maintenance of the M22-KC01

Fit with the front element removed, wire with ferrules on stranded conductors, torque the terminals to no more than 0.8 Nm and then test the full stroke. The N/C contact must open on actuation and close on release. Test the stop function in the circuit, not only the element on the bench.

Replace the element as soon as a stop button shows hesitation or inconsistent resistance. Elements in stop circuits should be kept in stock.

Typical applications of the M22-KC01 in Oman and the GCC

Stop buttons and emergency-stop stations on pumps, compressors, conveyors and motor control centres in oil and gas, power, water and desalination facilities. Interlock circuits where a door or guard must open a normally closed contact. Maintenance spare for older M22 stations.

M22 devices related to the M22-KC01

The table lists catalog numbers of M22 parts that are commonly ordered together. Combinations depend on your design, so treat it as a map of the family and not as a bill of material.

Model Catalog number Description
M22-D-G 216596 Flat pushbutton actuator, green, momentary
M22-D-R 216594 Flat pushbutton actuator, red, momentary
M22-D-W 216592 Flat pushbutton actuator, white, momentary
M22-DL-R 216925 Illuminated flat pushbutton actuator, red, momentary
M22-L-R 216772 Flush indicator light, red lens
M22-L-Y 216774 Flush indicator light, yellow lens
M22-LED-R 216558 LED element, red, 12–30 V AC/DC
M22-LED-G 216559 LED element, green, 12–30 V AC/DC
M22-KC10 216380 Contact element, 1 N/O, base fixing, screw
M22-KC01 216382 Contact element, 1 N/C, base fixing, screw
M22-PV 216876 Emergency-stop mushroom, pull-to-release
M22-PVT 263467 Emergency-stop mushroom, turn-to-release

Information to send with an RFQ for M22-KC01

  • Exact model M22-KC01 (catalog number 216382) and the quantity, including spares.
  • Number of contacts per button.
  • Control voltage and load to be switched.
  • Front elements the contacts will be fitted behind.
  • Delivery location (Muscat, Sohar, Salalah or elsewhere in the GCC) and the date you need the goods.
  • Any documents you need with the quotation, such as an installation leaflet or a declaration of conformity.

Documents and quotation

The manufacturer datasheet for M22-KC01 is attached on this page, so you can check the ratings and approvals against your project before ordering. Installation leaflets and declarations of conformity can be requested separately.

Seven Star LLC supplies Eaton industrial control products in Oman and the GCC. To request a quotation, send model M22-KC01, the quantity and your delivery location, and we will confirm availability and lead time.

Other Models in the Eaton M22 Rmqtitan Range

Seven Star LLC supplies models from the Eaton M22 Rmqtitan range in Oman and the GCC. Compare the related models below and request a quote for the one that matches your application.

ModelCategory
Eaton M22-D-G RMQ-Titan Green Flat Pushbutton ActuatorAutomation AccessoriesView details
Eaton M22-D-R RMQ-Titan Red Flat Pushbutton ActuatorAutomation AccessoriesView details
Eaton M22-D-W RMQ-Titan White Flat Pushbutton ActuatorAutomation AccessoriesView details
Eaton M22-DL-R RMQ-Titan Red Illuminated Pushbutton ActuatorAutomation AccessoriesView details
Eaton M22-L-R RMQ-Titan Red Flush Indicator LightAutomation AccessoriesView details
Eaton M22-L-Y RMQ-Titan Yellow Flush Indicator LightAutomation AccessoriesView details
Eaton M22-LED-R RMQ-Titan Red LED Element 12-30 V AC/DCAutomation AccessoriesView details
Eaton M22-LED-G RMQ-Titan Green LED Element 12-30 V AC/DCAutomation AccessoriesView details
Eaton M22-KC10 RMQ-Titan Contact Element 1 N/O Base FixingAutomation AccessoriesView details
Eaton M22-KC01 RMQ-Titan Contact Element 1 N/C Base FixingAutomation AccessoriesYou are viewing this model
Datasheets & Documents
Reviews (0)

Reviews

There are no reviews yet.

How would you rate this product?

It takes about 10 seconds — just tap a star. Your email is never published.

About brand

Eaton is a power management company that began in 1911, when Joseph O. Eaton started a truck axle business in New York and moved it to Cleveland, Ohio, in 1914. It grew from vehicle components into electrical equipment, hydraulics and aerospace systems. Since buying Cooper Industries in 2012, Eaton has been incorporated in Ireland with its head office in Dublin, and it is listed on the New York Stock Exchange.

Seven Star LLC lists Eaton NZM molded case circuit breakers, PKZM0 motor-protective circuit breakers and Bussmann series Class J fuses, and supplies them to panel builders and maintenance teams in Oman and the GCC.

Eaton company profile

Founded 1911, New York, USA, by Joseph O. Eaton
Early move Cleveland, Ohio, 1914
Headquarters Dublin, Ireland, since the 2012 Cooper Industries acquisition
Listing New York Stock Exchange (ETN)
Brands Eaton, Moeller, Bussmann, Crouse-Hinds, MTL and MEDC
Product families FAZ and PL miniature circuit breakers, NZM moulded-case breakers, DILM contactors, PowerXL variable frequency drives, 9PX and 93PM UPS, Bussmann fuses, hazardous-area enclosures and signalling

Milestones

  • 1911: Joseph O. Eaton starts an axle business in New York.
  • 1914: The business moves to Cleveland.
  • 2012: Eaton acquires Cooper Industries and redomiciles in Ireland.

Eaton circuit protection listed here

The NZMN1-A80 is a frame size 1 molded case circuit breaker rated 80 A with a thermomagnetic release for cable and system protection. The PKZM0-1,6 is a motor-protective circuit breaker whose overload release is adjustable from 1 to 1.6 A, used as a manual motor starter. The LPJ-35SP is a Bussmann series Low-Peak Class J time-delay fuse rated 35 A at 600 V AC. Older NZM and PKZ devices carry the Moeller name on the nameplate, and the type designations are the same.

Where Eaton breakers and fuses are used

Motor control centers, feeder panels, machine control cabinets and UL-style fused disconnects.

Eaton products we list

Family Examples
Circuit Breakers LPJ-35SP Class J Time-Delay Fuse, NZMN1-A80 Molded Case Circuit Breaker, NZMN2-A250 Molded Case Circuit Breaker, NZMN3-AE400 Molded Case Circuit Breaker, PKZM0-1
AC Drives DA1-342D2FB-A20C AC Drive, PowerXL DG1-34140FN-C21C Variable Freque…

Ordering Eaton parts: what we need

Send the full type and article number, the number of poles, the current rating or setting range, and any accessories such as auxiliary contacts, trip releases or rotary handles.

Facts checked against Eaton's corporate history and investor materials, October 2026.

FAQ

Questions about the Eaton M22-KC01 RMQ-Titan Contact Element 1 N/C Base

Answers from our engineering team on installation, compatibility and integration.

01What is the M22-KC01?
It is a one-pole normally closed contact element for the RMQ-Titan M22 system with screw terminals and base fixing. The normally closed contact has positive opening.
02What does positive opening mean for the M22-KC01?
The contact is forced open by direct mechanical action when the actuator reaches its end position. The datasheet lists a minimum force for positive opening of 15 N.
03What current can the M22-KC01 switch?
AC-15: 6 A at 220 to 240 V, 4 A at 380 to 415 V. DC-13: 3 A at 24 V and 0.3 A at 220 V.
04What is the difference between the M22-KC01 and the M22-KC10?
The M22-KC01 is normally closed with positive opening. The M22-KC10 is normally open. Ratings and fixing are the same.
05How many of these can be fitted per base?
The datasheet notes up to three elements per enclosure base. Behind emergency-stop mushrooms the limit is four single-pole elements.