Brand:

Eaton M22-L-Y RMQ-Titan Yellow Flush Indicator Light

Description

M22-L-Y RMQ-Titan indicator light, flush, yellow

The Eaton Eaton M22-L-Y (catalog number 216774) is a flush indicator light front element with a yellow lens, part of the RMQ-Titan M22 system for 22.5 mm holes. Yellow or amber is the usual colour for a warning or pre-alarm condition: a state that needs attention but does not yet demand a shutdown. As with the other M22 indicator lenses, the lamp is a separate LED element. For this yellow lens, the manufacturer specifies a white LED element. Seven Star LLC supplies the Eaton M22-L-Y in Oman and the GCC.

Reading the M22-L-Y part number

M22 is the 22.5 mm RMQ-Titan family, L is the indicator light and Y the yellow lens. The same device is listed with the alternate catalog number M22-L-YQ. Unlike the red and green lenses, the yellow lens does not take a yellow LED element, which is a point that is easy to miss when ordering.

Eaton M22-L-Y technical specifications

Parameter Specification
Manufacturer / part number Eaton / M22-L-Y (catalog number 216774)
Basic function Indicator light, flush lens
Lens colour Yellow
Degree of protection IP67, IP69K
Terminal capacity, solid and stranded 0.5 to 1.5 mm²
Rated impulse withstand voltage Uimp 4,000 V AC
Rated insulation voltage Ui 250 V
Overvoltage category / pollution degree III / 3
Ambient temperature –25 to +70 °C, open
Shock resistance 30 g, 11 ms half-sine, to IEC 60068-2-27
Climatic proofing Damp heat, constant (IEC 60068-2-78) and cyclic (IEC 60068-2-30)
Mounting position As required
Standards IEC/EN 60947, VDE 0660
SmartWire-DT Connection possible with SWD-RMQ connections

The LED pairing rule for the M22-L-Y

The manufacturer publishes a short rule for M22 lit parts: red parts go only with red LED elements, green with green, white with white, and yellow with white. Blue parts can take white or blue. That rule is why the M22-L-Y is ordered with the M22-LED-W and not with a yellow element.

The elements in the M22-LED series run from 12 to 30 V AC/DC at 50/60 Hz and take 8 to 15 mA, with a maximum power of 0.26 W at 24 V. Check the datasheet of the element you order, because the 85 to 264 V elements use a different catalog number.

How the M22-L-Y is used in practice

The lens is passive. A pre-alarm, a high-temperature warning, a standby condition or a maintenance-due message is wired to the LED element, usually from a PLC output at 24 V DC. A yellow lens is the second step of a typical three-colour scheme: green for normal, yellow for warning, red for fault, and the M22-L-Y covers the middle step.

Because the M22-L-Y is an indicator and not an actuator, it has no moving parts. Its mechanical limits concern the front: protection to IP67 and IP69K, a damp heat proofing, 30 g shock resistance and an ambient range of –25 to +70 °C. These are the same family values as the red lens M22-L-R.

Selecting the M22-L-Y: checklist

  • Confirm yellow lens colour and indication-only function.
  • Order the white LED element, M22-LED-W, and not a yellow element.
  • Confirm the supply voltage of the lamp circuit (12 to 30 V AC/DC for the standard element).
  • Check the 22.5 mm cut-out and panel thickness.
  • Check colour code agreement with the project and the operators.
  • Consider a spare lens and a spare element per colour for critical panels.

Installation and maintenance of the M22-L-Y

Fit the lens in the door, add the adapter and clip the LED element on. Conductors of 0.5 to 1.5 mm² are listed for the lens datasheet, while the LED element accepts up to 2.5 mm²; use ferrules on stranded conductors. After wiring, energise the circuit and check that the glow is even and the colour reads as yellow from the operator position.

In service, a dark lens means a failed element or an open circuit, and the element is replaced without disturbing the lens. Keep the sealing intact when the door is reassembled, because the IP rating depends on correct mounting.

Typical applications of the M22-L-Y in Oman and the GCC

Warning lamps on drive and motor starter panels, high-temperature and low-pressure pre-alarms on skid packages, standby and maintenance indication on utility panels in oil and gas, petrochemical and desalination facilities. In hot, dusty and humid locations a sealed front lens keeps the indication readable and the enclosure intact.

M22 devices related to the M22-L-Y

The table lists catalog numbers of M22 parts that are commonly ordered together. Combinations depend on your design, so treat it as a map of the family and not as a bill of material.

Model Catalog number Description
M22-D-G 216596 Flat pushbutton actuator, green, momentary
M22-D-R 216594 Flat pushbutton actuator, red, momentary
M22-D-W 216592 Flat pushbutton actuator, white, momentary
M22-DL-R 216925 Illuminated flat pushbutton actuator, red, momentary
M22-L-R 216772 Flush indicator light, red lens
M22-L-Y 216774 Flush indicator light, yellow lens
M22-LED-R 216558 LED element, red, 12–30 V AC/DC
M22-LED-G 216559 LED element, green, 12–30 V AC/DC
M22-KC10 216380 Contact element, 1 N/O, base fixing, screw
M22-KC01 216382 Contact element, 1 N/C, base fixing, screw
M22-PV 216876 Emergency-stop mushroom, pull-to-release
M22-PVT 263467 Emergency-stop mushroom, turn-to-release

Information to send with an RFQ for M22-L-Y

  • Exact model M22-L-Y (catalog number 216774) and the quantity, including spares.
  • White LED element (M22-LED-W) quantity and lamp supply voltage.
  • Panel cut-out and door thickness.
  • Colour scheme used on your panel.
  • Delivery location (Muscat, Sohar, Salalah or elsewhere in the GCC) and the date you need the goods.
  • Any documents you need with the quotation, such as an installation leaflet or a declaration of conformity.

Documents and quotation

The manufacturer datasheet for M22-L-Y is attached on this page, so you can check the ratings and approvals against your project before ordering. Installation leaflets and declarations of conformity can be requested separately.

Seven Star LLC supplies Eaton industrial control products in Oman and the GCC. To request a quotation, send model M22-L-Y, the quantity and your delivery location, and we will confirm availability and lead time.

Other Models in the Eaton M22 Rmqtitan Range

Seven Star LLC supplies models from the Eaton M22 Rmqtitan range in Oman and the GCC. Compare the related models below and request a quote for the one that matches your application.

ModelCategory
Eaton M22-D-G RMQ-Titan Green Flat Pushbutton ActuatorAutomation AccessoriesView details
Eaton M22-D-R RMQ-Titan Red Flat Pushbutton ActuatorAutomation AccessoriesView details
Eaton M22-D-W RMQ-Titan White Flat Pushbutton ActuatorAutomation AccessoriesView details
Eaton M22-DL-R RMQ-Titan Red Illuminated Pushbutton ActuatorAutomation AccessoriesView details
Eaton M22-L-R RMQ-Titan Red Flush Indicator LightAutomation AccessoriesView details
Eaton M22-L-Y RMQ-Titan Yellow Flush Indicator LightAutomation AccessoriesYou are viewing this model
Datasheets & Documents
Reviews (0)

Reviews

There are no reviews yet.

How would you rate this product?

It takes about 10 seconds — just tap a star. Your email is never published.

About brand

Eaton is a power management company that began in 1911, when Joseph O. Eaton started a truck axle business in New York and moved it to Cleveland, Ohio, in 1914. It grew from vehicle components into electrical equipment, hydraulics and aerospace systems. Since buying Cooper Industries in 2012, Eaton has been incorporated in Ireland with its head office in Dublin, and it is listed on the New York Stock Exchange.

Seven Star LLC lists Eaton NZM molded case circuit breakers, PKZM0 motor-protective circuit breakers and Bussmann series Class J fuses, and supplies them to panel builders and maintenance teams in Oman and the GCC.

Eaton company profile

Founded 1911, New York, USA, by Joseph O. Eaton
Early move Cleveland, Ohio, 1914
Headquarters Dublin, Ireland, since the 2012 Cooper Industries acquisition
Listing New York Stock Exchange (ETN)
Brands Eaton, Moeller, Bussmann, Crouse-Hinds, MTL and MEDC
Product families FAZ and PL miniature circuit breakers, NZM moulded-case breakers, DILM contactors, PowerXL variable frequency drives, 9PX and 93PM UPS, Bussmann fuses, hazardous-area enclosures and signalling

Milestones

  • 1911: Joseph O. Eaton starts an axle business in New York.
  • 1914: The business moves to Cleveland.
  • 2012: Eaton acquires Cooper Industries and redomiciles in Ireland.

Eaton circuit protection listed here

The NZMN1-A80 is a frame size 1 molded case circuit breaker rated 80 A with a thermomagnetic release for cable and system protection. The PKZM0-1,6 is a motor-protective circuit breaker whose overload release is adjustable from 1 to 1.6 A, used as a manual motor starter. The LPJ-35SP is a Bussmann series Low-Peak Class J time-delay fuse rated 35 A at 600 V AC. Older NZM and PKZ devices carry the Moeller name on the nameplate, and the type designations are the same.

Where Eaton breakers and fuses are used

Motor control centers, feeder panels, machine control cabinets and UL-style fused disconnects.

Eaton products we list

Family Examples
Circuit Breakers LPJ-35SP Class J Time-Delay Fuse, NZMN1-A80 Molded Case Circuit Breaker, NZMN2-A250 Molded Case Circuit Breaker, NZMN3-AE400 Molded Case Circuit Breaker, PKZM0-1
AC Drives DA1-342D2FB-A20C AC Drive, PowerXL DG1-34140FN-C21C Variable Freque…

Ordering Eaton parts: what we need

Send the full type and article number, the number of poles, the current rating or setting range, and any accessories such as auxiliary contacts, trip releases or rotary handles.

Facts checked against Eaton's corporate history and investor materials, October 2026.

FAQ

Questions about the Eaton M22-L-Y RMQ-Titan Yellow Flush Indicator Light

Answers from our engineering team on installation, compatibility and integration.

01What is the M22-L-Y used for?
It is a yellow flush indicator light front element for 22.5 mm holes, commonly used for warning or pre-alarm indication.
02Which LED element does the M22-L-Y need?
The manufacturer pairs yellow lenses with the white LED element M22-LED-W. A yellow LED element is not specified for it.
03Does the M22-L-Y have any moving parts?
No. It is an indicator lens. Only the LED element behind it produces light, so there is no actuator or contact.
04What protection does the M22-L-Y have?
The datasheet lists IP67 and IP69K for the front, with damp heat proofing and an operating range of –25 to +70 °C.
05What is the alternate catalog number of the M22-L-Y?
The Q-suffixed number M22-L-YQ is listed as the alternate catalog number.