Brand:

Eaton M22-LED-G RMQ-Titan Green LED Element 12-30 V AC/DC

Description

M22-LED-G green LED element for RMQ-Titan M22 devices

The Eaton Eaton M22-LED-G (catalog number 216559) is the green LED element for the RMQ-Titan M22 system. It is the light source mounted behind a green lens or button plate, and it is what makes a green indicator light or a green illuminated actuator glow. It has the same electrical data as the red element M22-LED-R, 12 to 30 V AC/DC with screw terminals, and differs in the colour of the LED. Seven Star LLC supplies the Eaton M22-LED-G in Oman and the GCC.

What the letters in M22-LED-G stand for

M22 is the RMQ-Titan system, LED is the LED element and G is green. The catalog lists the same element as M22-LED-GQ for the alternate number. In practice G is used for run, ready and normal-state indication, and the M22-LED-G typically sits next to an M22-LED-R in the same panel.

Eaton M22-LED-G technical specifications

Parameter Specification
Manufacturer / part number Eaton / M22-LED-G (catalog number 216559)
Basic function LED element for M22 lit devices
Colour Green
Fixing Front fixing
Connection technique Screw terminals
Rated operational voltage Ue 12 to 30 V AC/DC, 50/60 Hz
Rated operational current Ie 8 to 15 mA
Maximum power consumption 0.26 W at 24 V
Degree of protection IP20
Terminal capacity 0.75 to 2.5 mm² solid; 0.5 to 2.5 mm² stranded
Operating torque, screw terminals Up to 0.8 Nm
Rated impulse withstand voltage Uimp 6,000 V AC
Rated insulation voltage Ui 500 V
Overvoltage category / pollution degree III / 3
Ambient temperature –25 to +70 °C, open; storage –40 to +80 °C
Shock resistance 30 g, 11 ms half-sine, to IEC 60068-2-27
Integrated components LED lamp and diode; no transformer, no dropping resistor
Standards and approvals IEC/EN 60947-5; UL 508; CSA-C22.2 No. 14-05 and No. 94-91; CE marking

How the M22-LED-G is wired and used

The element is a single LED with an integrated diode, and it needs no external dropping resistor. It runs on 12 to 30 V AC/DC with 8 to 15 mA, so it suits a 24 V DC PLC output. If the output cannot source the current, a small interposing relay is the normal solution.

It is a front-fixing element with screw terminals, designed to sit on the M22 adapter. The terminal screws take up to 0.8 Nm and accept 0.75 to 2.5 mm² solid or 0.5 to 2.5 mm² stranded conductors. The datasheet is the older generation of the family (2014 edition) and is consistent with the red element in all electrical values.

Which devices take the M22-LED-G

Under the manufacturer rule, green lenses and button plates use green elements only. In the M22 range, green lit devices include illuminated actuators and indicator lights. The M22-LED-G does not go behind a red or yellow lens. Yellow parts use the white element M22-LED-W instead.

In a three-colour scheme the green element signals normal or running, the white-element yellow lens signals warning, and the M22-LED-R behind a red lens signals fault or stop. Replacing a green element with a red one would show the wrong state in the field, so keep the colour stock clearly separated and labelled.

Selecting the M22-LED-G: checklist

  • Confirm the green lens or button plate the element will sit behind.
  • Confirm 12 to 30 V AC/DC supply and at least 8 to 15 mA per element.
  • Do not use this element on mains; mains-rated elements are a separate series.
  • Match quantities to the number of lit devices, plus spares.
  • Check that the project colour code assigns green to the function you intend.

Installation and maintenance of the M22-LED-G

Clip the element to the front of the adapter, tighten the terminals to no more than 0.8 Nm and test with the supply on before closing the door. The element is IP20 and depends on the lens and the enclosure for sealing.

A green lens that stays dark with a correct supply usually points to a failed element. Replace it as a unit.

Typical applications of the M22-LED-G in Oman and the GCC

Run and ready indication on pumps, compressors and fans, supply-on lamps on motor control centres and drive panels, and status lamps on utility and water-treatment control panels. Also a common replacement in older M22 panels in oil and gas and power installations.

M22 devices related to the M22-LED-G

The table lists catalog numbers of M22 parts that are commonly ordered together. Combinations depend on your design, so treat it as a map of the family and not as a bill of material.

Model Catalog number Description
M22-D-G 216596 Flat pushbutton actuator, green, momentary
M22-D-R 216594 Flat pushbutton actuator, red, momentary
M22-D-W 216592 Flat pushbutton actuator, white, momentary
M22-DL-R 216925 Illuminated flat pushbutton actuator, red, momentary
M22-L-R 216772 Flush indicator light, red lens
M22-L-Y 216774 Flush indicator light, yellow lens
M22-LED-R 216558 LED element, red, 12–30 V AC/DC
M22-LED-G 216559 LED element, green, 12–30 V AC/DC
M22-KC10 216380 Contact element, 1 N/O, base fixing, screw
M22-KC01 216382 Contact element, 1 N/C, base fixing, screw
M22-PV 216876 Emergency-stop mushroom, pull-to-release
M22-PVT 263467 Emergency-stop mushroom, turn-to-release

Information to send with an RFQ for M22-LED-G

  • Exact model M22-LED-G (catalog number 216559) and the quantity, including spares.
  • Lens or button plate colour the element is for.
  • Supply voltage of the lamp circuit.
  • Quantity, including spares.
  • Delivery location (Muscat, Sohar, Salalah or elsewhere in the GCC) and the date you need the goods.
  • Any documents you need with the quotation, such as an installation leaflet or a declaration of conformity.

Documents and quotation

The manufacturer datasheet for M22-LED-G is attached on this page, so you can check the ratings and approvals against your project before ordering. Installation leaflets and declarations of conformity can be requested separately.

Seven Star LLC supplies Eaton industrial control products in Oman and the GCC. To request a quotation, send model M22-LED-G, the quantity and your delivery location, and we will confirm availability and lead time.

Other Models in the Eaton M22 Rmqtitan Range

Seven Star LLC supplies models from the Eaton M22 Rmqtitan range in Oman and the GCC. Compare the related models below and request a quote for the one that matches your application.

ModelCategory
Eaton M22-D-G RMQ-Titan Green Flat Pushbutton ActuatorAutomation AccessoriesView details
Eaton M22-D-R RMQ-Titan Red Flat Pushbutton ActuatorAutomation AccessoriesView details
Eaton M22-D-W RMQ-Titan White Flat Pushbutton ActuatorAutomation AccessoriesView details
Eaton M22-DL-R RMQ-Titan Red Illuminated Pushbutton ActuatorAutomation AccessoriesView details
Eaton M22-L-R RMQ-Titan Red Flush Indicator LightAutomation AccessoriesView details
Eaton M22-L-Y RMQ-Titan Yellow Flush Indicator LightAutomation AccessoriesView details
Eaton M22-LED-R RMQ-Titan Red LED Element 12-30 V AC/DCAutomation AccessoriesView details
Eaton M22-LED-G RMQ-Titan Green LED Element 12-30 V AC/DCAutomation AccessoriesYou are viewing this model
Datasheets & Documents
  • PDF Datasheet Eaton M22-LED-G Datasheet Download
Reviews (0)

Reviews

There are no reviews yet.

How would you rate this product?

It takes about 10 seconds — just tap a star. Your email is never published.

About brand

Eaton is a power management company that began in 1911, when Joseph O. Eaton started a truck axle business in New York and moved it to Cleveland, Ohio, in 1914. It grew from vehicle components into electrical equipment, hydraulics and aerospace systems. Since buying Cooper Industries in 2012, Eaton has been incorporated in Ireland with its head office in Dublin, and it is listed on the New York Stock Exchange.

Seven Star LLC lists Eaton NZM molded case circuit breakers, PKZM0 motor-protective circuit breakers and Bussmann series Class J fuses, and supplies them to panel builders and maintenance teams in Oman and the GCC.

Eaton company profile

Founded 1911, New York, USA, by Joseph O. Eaton
Early move Cleveland, Ohio, 1914
Headquarters Dublin, Ireland, since the 2012 Cooper Industries acquisition
Listing New York Stock Exchange (ETN)
Brands Eaton, Moeller, Bussmann, Crouse-Hinds, MTL and MEDC
Product families FAZ and PL miniature circuit breakers, NZM moulded-case breakers, DILM contactors, PowerXL variable frequency drives, 9PX and 93PM UPS, Bussmann fuses, hazardous-area enclosures and signalling

Milestones

  • 1911: Joseph O. Eaton starts an axle business in New York.
  • 1914: The business moves to Cleveland.
  • 2012: Eaton acquires Cooper Industries and redomiciles in Ireland.

Eaton circuit protection listed here

The NZMN1-A80 is a frame size 1 molded case circuit breaker rated 80 A with a thermomagnetic release for cable and system protection. The PKZM0-1,6 is a motor-protective circuit breaker whose overload release is adjustable from 1 to 1.6 A, used as a manual motor starter. The LPJ-35SP is a Bussmann series Low-Peak Class J time-delay fuse rated 35 A at 600 V AC. Older NZM and PKZ devices carry the Moeller name on the nameplate, and the type designations are the same.

Where Eaton breakers and fuses are used

Motor control centers, feeder panels, machine control cabinets and UL-style fused disconnects.

Eaton products we list

Family Examples
Circuit Breakers LPJ-35SP Class J Time-Delay Fuse, NZMN1-A80 Molded Case Circuit Breaker, NZMN2-A250 Molded Case Circuit Breaker, NZMN3-AE400 Molded Case Circuit Breaker, PKZM0-1
AC Drives DA1-342D2FB-A20C AC Drive, PowerXL DG1-34140FN-C21C Variable Freque…

Ordering Eaton parts: what we need

Send the full type and article number, the number of poles, the current rating or setting range, and any accessories such as auxiliary contacts, trip releases or rotary handles.

Facts checked against Eaton's corporate history and investor materials, October 2026.

FAQ

Questions about the Eaton M22-LED-G RMQ-Titan Green LED Element 12-30 V

Answers from our engineering team on installation, compatibility and integration.

01What is the M22-LED-G?
It is the green LED element of the RMQ-Titan M22 system, mounted behind a green lens or button plate to light it.
02What voltage does the M22-LED-G run on?
12 to 30 V AC/DC at 50/60 Hz, drawing 8 to 15 mA, with a maximum power of 0.26 W at 24 V.
03Can the M22-LED-G be used behind a yellow lens?
No. The manufacturer pairs yellow lenses with the white LED element M22-LED-W. Green elements go behind green parts.
04Does the M22-LED-G need a resistor?
No. The datasheet lists it with an integrated LED and diode and no external dropping resistor or transformer is needed within its voltage range.
05What protection does the M22-LED-G have?
The element itself is rated IP20. It relies on the lens, the adapter and the enclosure for protection.