Brand:

Eaton M22-DL-R RMQ-Titan Red Illuminated Pushbutton Actuator

Description

M22-DL-R RMQ-Titan illuminated flat pushbutton actuator, red

The Eaton Eaton M22-DL-R (catalog number 216925) is an illuminated pushbutton actuator for the RMQ-Titan M22 system. It is a flat, momentary button with a red button plate and a titanium-coloured bezel, built so that a lamp element behind it lights the whole button face. Where the plain M22-D-R only gives a command, the Eaton M22-DL-R also gives feedback: the same 22.5 mm hole carries both the button and the indication. Seven Star LLC supplies the M22-DL-R in Oman and the GCC for panel builders and maintenance teams.

Decoding the M22-DL-R model code

M22 is the RMQ-Titan 22.5 mm system. DL is the illuminated flat pushbutton actuator, with D for the flat pushbutton and L for light, and R is the red button plate. The device carries the alternate catalog number M22-DL-RQ. The data sheet describes the button plate as blank. The red illuminated pushbutton is the typical choice when a stop or off button must also show the state of the machine.

Eaton M22-DL-R technical specifications

Parameter Specification
Manufacturer / part number Eaton / M22-DL-R (catalog number 216925)
Basic function Illuminated pushbutton actuator, momentary
Design Flat, blank button plate, bezel: titanium
Button plate colour Red
Suitable for illumination Yes (lamp element ordered separately)
Single unit / complete unit Single unit (front element only)
Spring return / latching Spring return; no latching
Product range RMQ-Titan, M22 series, 22.5 mm mounting hole
Degree of protection, front IP66, IP67, IP69K; NEMA 4X, 13 (as stated by the manufacturer)
Mechanical lifespan More than 5 million operations
Operating frequency Up to 3,600 operations per hour
Actuating force Up to 5 N
Ambient temperature –25 to +70 °C open; storage –40 to +80 °C
Shock resistance 30 g, 11 ms half-sine, to IEC 60068-2-27
Climatic proofing Damp heat, constant (IEC 60068-2-78) and cyclic (IEC 60068-2-30)
Mounting position As required
Standards and approvals IEC/EN 60947, VDE 0660; UL 508; CSA-C22.2 No. 14-05 and No. 94-91; CE marking
SmartWire-DT Connection possible with SWD-RMQ connections

How the M22-DL-R combines command and light

The actuator is a lens and plunger assembly. The button plate is translucent, so the light of an LED element mounted in the adapter shines through it. The actuator itself holds no lamp, which is why the lamp element is ordered separately. The manufacturer states a colour pairing rule for M22 lit devices: red parts are used only with red LED elements. For the M22-DL-R this means the M22-LED-R, which is rated 12 to 30 V AC/DC and takes 8 to 15 mA, with a maximum power consumption of 0.26 W at 24 V.

The button part works exactly like the unlit version. Pressing it moves the plunger and operates the contact elements, and a spring brings it back. The mechanical life is more than 5 million operations at up to 3,600 operations per hour, and the actuating force is up to 5 N, the same as the unlit M22-D-R.

Because the lamp is a separate element, the light can be driven from the same signal as the contact or from a separate source such as a PLC output. That freedom is why an illuminated stop button can show a different state from the button position itself, for example flashing red when a fault is present.

Building a complete assembly around the M22-DL-R

A complete lit button on a door needs three parts: the M22-DL-R front element, an M22-LED-R lamp element, and one or more contact elements such as the M22-KC01 or the M22-KC10. The elements mount on the same adapter. Wiring the lamp to 24 V DC is the most common choice in PLC panels, and the LED element accepts both AC and DC in its stated range.

The LED element has screw terminals for 0.75 to 2.5 mm² solid and 0.5 to 2.5 mm² stranded conductors and carries a rated insulation voltage of 500 V according to its datasheet. Contact elements are separate, so the lamp circuit and the contact circuit remain electrically independent.

Selecting the M22-DL-R: checklist

  • Confirm that the function needs a lit button, red, flat and momentary.
  • Order the matching red LED element, M22-LED-R, with the actuator.
  • Confirm the control voltage for the lamp (12 to 30 V AC/DC for the element).
  • Select contact elements for the command circuit.
  • Check the panel cut-out of 22.5 mm and the door thickness.
  • If no light is needed, the unlit M22-D-R is simpler to stock.

Installation, commissioning and maintenance of the M22-DL-R

Fit the front element in the door, add the adapter, the LED element and the contacts, then wire the lamp to its supply. Test the lamp from the lamp circuit and the contact from the command circuit separately, so that faults are easy to find later. LED life is long compared with filament lamps, but an element that is dark with the supply present is replaced by itself without removing the actuator.

Keep a spare LED element together with a spare M22-DL-R for stations that must not be left without indication. Clean the lens with a damp cloth. Do not use abrasive pads on the button plate, because scratches scatter the light.

Typical applications of the M22-DL-R in Oman and the GCC

Illuminated stop or running indication on motor control centres, pump stations, compressor packages and HVAC plant rooms. Control panels in oil and gas and utility facilities where operators work at night and need a button that is visible at a glance. Desalination and water-treatment skids where a sealed front with IP69K protects the button in wash-down areas.

M22 devices related to the M22-DL-R

The table lists catalog numbers of M22 parts that are commonly ordered together. Combinations depend on your design, so treat it as a map of the family and not as a bill of material.

Model Catalog number Description
M22-D-G 216596 Flat pushbutton actuator, green, momentary
M22-D-R 216594 Flat pushbutton actuator, red, momentary
M22-D-W 216592 Flat pushbutton actuator, white, momentary
M22-DL-R 216925 Illuminated flat pushbutton actuator, red, momentary
M22-L-R 216772 Flush indicator light, red lens
M22-L-Y 216774 Flush indicator light, yellow lens
M22-LED-R 216558 LED element, red, 12–30 V AC/DC
M22-LED-G 216559 LED element, green, 12–30 V AC/DC
M22-KC10 216380 Contact element, 1 N/O, base fixing, screw
M22-KC01 216382 Contact element, 1 N/C, base fixing, screw
M22-PV 216876 Emergency-stop mushroom, pull-to-release
M22-PVT 263467 Emergency-stop mushroom, turn-to-release

Information to send with an RFQ for M22-DL-R

  • Exact model M22-DL-R (catalog number 216925) and the quantity, including spares.
  • Matching LED element and lamp supply voltage.
  • Contact elements and quantity.
  • Panel cut-out and door thickness.
  • Delivery location (Muscat, Sohar, Salalah or elsewhere in the GCC) and the date you need the goods.
  • Any documents you need with the quotation, such as an installation leaflet or a declaration of conformity.

Documents and quotation

The manufacturer datasheet for M22-DL-R is attached on this page, so you can check the ratings and approvals against your project before ordering. Installation leaflets and declarations of conformity can be requested separately.

Seven Star LLC supplies Eaton industrial control products in Oman and the GCC. To request a quotation, send model M22-DL-R, the quantity and your delivery location, and we will confirm availability and lead time.

Other Models in the Eaton M22 Rmqtitan Range

Seven Star LLC supplies models from the Eaton M22 Rmqtitan range in Oman and the GCC. Compare the related models below and request a quote for the one that matches your application.

ModelCategory
Eaton M22-D-G RMQ-Titan Green Flat Pushbutton ActuatorAutomation AccessoriesView details
Eaton M22-D-R RMQ-Titan Red Flat Pushbutton ActuatorAutomation AccessoriesView details
Eaton M22-D-W RMQ-Titan White Flat Pushbutton ActuatorAutomation AccessoriesView details
Eaton M22-DL-R RMQ-Titan Red Illuminated Pushbutton ActuatorAutomation AccessoriesYou are viewing this model
Datasheets & Documents
Reviews (0)

Reviews

There are no reviews yet.

How would you rate this product?

It takes about 10 seconds — just tap a star. Your email is never published.

About brand

Eaton is a power management company that began in 1911, when Joseph O. Eaton started a truck axle business in New York and moved it to Cleveland, Ohio, in 1914. It grew from vehicle components into electrical equipment, hydraulics and aerospace systems. Since buying Cooper Industries in 2012, Eaton has been incorporated in Ireland with its head office in Dublin, and it is listed on the New York Stock Exchange.

Seven Star LLC lists Eaton NZM molded case circuit breakers, PKZM0 motor-protective circuit breakers and Bussmann series Class J fuses, and supplies them to panel builders and maintenance teams in Oman and the GCC.

Eaton company profile

Founded 1911, New York, USA, by Joseph O. Eaton
Early move Cleveland, Ohio, 1914
Headquarters Dublin, Ireland, since the 2012 Cooper Industries acquisition
Listing New York Stock Exchange (ETN)
Brands Eaton, Moeller, Bussmann, Crouse-Hinds, MTL and MEDC
Product families FAZ and PL miniature circuit breakers, NZM moulded-case breakers, DILM contactors, PowerXL variable frequency drives, 9PX and 93PM UPS, Bussmann fuses, hazardous-area enclosures and signalling

Milestones

  • 1911: Joseph O. Eaton starts an axle business in New York.
  • 1914: The business moves to Cleveland.
  • 2012: Eaton acquires Cooper Industries and redomiciles in Ireland.

Eaton circuit protection listed here

The NZMN1-A80 is a frame size 1 molded case circuit breaker rated 80 A with a thermomagnetic release for cable and system protection. The PKZM0-1,6 is a motor-protective circuit breaker whose overload release is adjustable from 1 to 1.6 A, used as a manual motor starter. The LPJ-35SP is a Bussmann series Low-Peak Class J time-delay fuse rated 35 A at 600 V AC. Older NZM and PKZ devices carry the Moeller name on the nameplate, and the type designations are the same.

Where Eaton breakers and fuses are used

Motor control centers, feeder panels, machine control cabinets and UL-style fused disconnects.

Eaton products we list

Family Examples
Circuit Breakers LPJ-35SP Class J Time-Delay Fuse, NZMN1-A80 Molded Case Circuit Breaker, NZMN2-A250 Molded Case Circuit Breaker, NZMN3-AE400 Molded Case Circuit Breaker, PKZM0-1
AC Drives DA1-342D2FB-A20C AC Drive, PowerXL DG1-34140FN-C21C Variable Freque…

Ordering Eaton parts: what we need

Send the full type and article number, the number of poles, the current rating or setting range, and any accessories such as auxiliary contacts, trip releases or rotary handles.

Facts checked against Eaton's corporate history and investor materials, October 2026.

FAQ

Questions about the Eaton M22-DL-R RMQ-Titan Red Illuminated Pushbutton

Answers from our engineering team on installation, compatibility and integration.

01What is the difference between the M22-DL-R and the M22-D-R?
The M22-DL-R is built for illumination, so a lamp element behind it lights the button. The M22-D-R is a plain flat actuator without illumination.
02Which lamp element does the M22-DL-R use?
The manufacturer pairs red M22 lit parts with the red LED element M22-LED-R, rated 12 to 30 V AC/DC, 8 to 15 mA and 0.26 W maximum at 24 V.
03Is the lamp included with the M22-DL-R?
The datasheet lists the actuator as a single unit. The LED element and the contact elements are ordered separately, so confirm them in your quotation.
04What protection rating does the M22-DL-R have?
The datasheet lists IP66, IP67 and IP69K, with IP67/IP69K at the front and NEMA 4X listed for the North American market.
05Does the M22-DL-R latch?
No. It is momentary with spring return. A latching function is not part of this actuator.