Brand:

Eaton NZMN1-A80 Molded Case Circuit Breaker

Description

Overview

The Eaton NZMN1-A80 is a compact molded case circuit breaker from Eaton’s NZM series, engineered to protect distribution and feeder circuits up to 80 A with a thermal-magnetic trip mechanism in a rugged three-pole housing. Rated for 690 V AC operation with a short-circuit breaking capacity of 50 kA, the NZMN1-A80 is widely specified for main incomer protection, sub-distribution feeders, and motor feeder circuits where a fixed, non-adjustable trip setting and dependable mechanical switching are preferred over a fully electronic trip unit.

In Oman and the GCC, Seven Star LLC proudly supplies the Eaton NZMN1-A80 to panel builders, electrical contractors, and facility engineering teams across the Sultanate of Oman and the wider GCC. Seven Star LLC supplies the Eaton PKZM0-1,6/AK on request with the manufacturer datasheet, and lead time and availability are confirmed at quotation.

Operating Principle

The Eaton NZMN1-A80 combines a thermal overload element and a magnetic short-circuit element within a single molded case body. Under sustained overcurrent conditions, the thermal bimetal element heats and deflects proportionally to the current flowing through the breaker, tripping the mechanism once the current remains above the rated 80 A threshold for a duration defined by the breaker’s time-current curve, protecting downstream cabling and equipment from cumulative thermal damage. Under a short-circuit fault, the magnetic trip element responds within milliseconds to interrupt fault current before it can reach damaging peak levels, backed by a short-circuit breaking capacity of 50 kA at the breaker’s rated voltage.

Because the trip characteristic is factory-fixed rather than field-adjustable, the NZMN1-A80 delivers consistent, tamper-resistant protection performance that is well suited to main distribution boards and sub-panels where a stable, predictable trip curve is more valuable than in-field adjustability. The toggle-style ON/OFF/TRIP operating handle provides clear visual indication of breaker status and supports padlockable isolation for lockout-tagout procedures during maintenance work.

Engineering Design of the Eaton NZMN1-A80

Physically, the Eaton NZMN1-A80 is built around a glass-fiber-reinforced molded case that provides high mechanical strength and dielectric withstand suited to its 690 V AC / 500 V DC rated operational voltage and 6000 V rated impulse withstand voltage. The three-pole design uses front-frame screw-clamp terminal connections on both line and load sides, simplifying busbar and cable termination in distribution board and motor control center applications, and the compact NZM1 frame footprint allows multiple breakers to be mounted closely together in a standard distribution enclosure.

The breaker’s modular accessory architecture accepts auxiliary and alarm switches, shunt trips, and undervoltage releases without changing the base breaker body, allowing a single NZMN1-A80 unit to be configured for remote status monitoring, remote tripping, or safety interlocking as project requirements dictate. The push-to-trip test button on the front face allows maintenance personnel to verify mechanical trip functionality during routine testing without needing to apply an actual overcurrent condition.

Key Features

The Eaton NZMN1-A80 combines dependable circuit protection with straightforward panel integration. Key features include:

  • Fixed thermal-magnetic trip rating of 80 A, suited to sub-distribution feeders and motor circuits of matching load current.
  • Short-circuit breaking capacity of 50 kA, providing robust fault-current protection for distribution board applications.
  • Rated operational voltage of 690 V AC / 500 V DC with a 6000 V rated impulse withstand voltage.
  • Three-pole switching with front-frame screw-clamp terminals for simplified busbar and cable termination.
  • Push-to-trip test button for routine mechanical trip verification without applying an overcurrent condition.
  • Padlockable toggle handle supporting lockout-tagout isolation procedures during maintenance.
  • Modular accessory compatibility for auxiliary switches, alarm switches, shunt trips, and undervoltage releases.
  • Compliant with IEC/EN 60947 and UL 489 standards for global and GCC project specification acceptance.

Industrial Applications

The Eaton NZMN1-A80 is commonly specified as a sub-main or feeder breaker in low-voltage distribution boards, motor control centers, and building services panels across commercial, industrial, and infrastructure projects. In the GCC region, where district cooling plants, commercial HVAC systems, and RO desalination facilities depend on reliable feeder protection across dozens of individual circuits, the NZMN1-A80’s fixed, dependable trip characteristic and 50 kA breaking capacity make it a straightforward, cost-effective choice for standard 80 A feeder protection.

In Oman and the GCC, Seven Star LLC distributes the NZMN1-A80 to panel builders and electrical contractors serving hospitality developments, hospital complexes, and industrial zones such as the Sohar and Salalah economic free zones, where Eaton switchgear and lead times confirmed at quotation support project completion schedules. Seven Star LLC’s regional warehouse presence means a replacement NZMN1-A80 unit can reach a GCC facility far faster than importing directly from Europe.

Technical Specifications

The table below summarizes the principal specifications for the Eaton NZMN1-A80 molded case circuit breaker.

Parameter Specification
Model Eaton NZMN1-A80
Series Eaton NZM1 molded case circuit breaker
Rated Current 80 A, fixed thermal-magnetic trip
Rated Operational Voltage 690 V AC / 500 V DC
Rated Impulse Withstand Voltage 6000 V
Short-Circuit Breaking Capacity 50 kA
Number of Poles 3
Standards IEC/EN 60947, DIN VDE 0660, UL 489
Terminal Type Front-frame screw-clamp, line and load side
Accessory Compatibility Auxiliary/alarm switches, shunt trip, undervoltage release

Request a Quote for Eaton NZMN1-A80

Panel builders, electrical contractors, and procurement teams in Oman and across the GCC can request a formal RFQ for the Eaton NZMN1-A80 directly from Seven Star LLC’s instrumentation and switchgear division. In Oman and the GCC, Seven Star LLC supplies on request with lead time confirmed at quotation, provides the full technical datasheet for engineering review, and offers application support for selecting the correct frame size and accessory configuration for your distribution board. Contact Seven Star LLC today for a quotation on the Eaton NZMN1-A80 molded case circuit breaker, with local technical support.

Also available: Eaton PKZM0-1,6/AK Motor-Protective Circuit Breaker

Datasheets & Documents
  • PDF Datasheet Eaton NZMN1-A80 Datasheet Download
Reviews (0)

Reviews

There are no reviews yet.

How would you rate this product?

It takes about 10 seconds — just tap a star. Your email is never published.

About brand

Eaton is a power management company that began in 1911, when Joseph O. Eaton started a truck axle business in New York and moved it to Cleveland, Ohio, in 1914. It grew from vehicle components into electrical equipment, hydraulics and aerospace systems. Since buying Cooper Industries in 2012, Eaton has been incorporated in Ireland with its head office in Dublin, and it is listed on the New York Stock Exchange.

Seven Star LLC lists Eaton NZM molded case circuit breakers, PKZM0 motor-protective circuit breakers and Bussmann series Class J fuses, and supplies them to panel builders and maintenance teams in Oman and the GCC.

Eaton company profile

Founded 1911, New York, USA, by Joseph O. Eaton
Early move Cleveland, Ohio, 1914
Headquarters Dublin, Ireland, since the 2012 Cooper Industries acquisition
Listing New York Stock Exchange (ETN)
Brands Eaton, Moeller, Bussmann, Crouse-Hinds, MTL and MEDC
Product families FAZ and PL miniature circuit breakers, NZM moulded-case breakers, DILM contactors, PowerXL variable frequency drives, 9PX and 93PM UPS, Bussmann fuses, hazardous-area enclosures and signalling

Milestones

  • 1911: Joseph O. Eaton starts an axle business in New York.
  • 1914: The business moves to Cleveland.
  • 2012: Eaton acquires Cooper Industries and redomiciles in Ireland.

Eaton circuit protection listed here

The NZMN1-A80 is a frame size 1 molded case circuit breaker rated 80 A with a thermomagnetic release for cable and system protection. The PKZM0-1,6 is a motor-protective circuit breaker whose overload release is adjustable from 1 to 1.6 A, used as a manual motor starter. The LPJ-35SP is a Bussmann series Low-Peak Class J time-delay fuse rated 35 A at 600 V AC. Older NZM and PKZ devices carry the Moeller name on the nameplate, and the type designations are the same.

Where Eaton breakers and fuses are used

Motor control centers, feeder panels, machine control cabinets and UL-style fused disconnects.

Eaton products we list

Family Examples
Circuit Breakers LPJ-35SP Class J Time-Delay Fuse, NZMN1-A80 Molded Case Circuit Breaker, NZMN2-A250 Molded Case Circuit Breaker, NZMN3-AE400 Molded Case Circuit Breaker, PKZM0-1
AC Drives DA1-342D2FB-A20C AC Drive, PowerXL DG1-34140FN-C21C Variable Freque…

Ordering Eaton parts: what we need

Send the full type and article number, the number of poles, the current rating or setting range, and any accessories such as auxiliary contacts, trip releases or rotary handles.

Facts checked against Eaton's corporate history and investor materials, October 2026.

FAQ

Questions about the Eaton NZMN1-A80 Molded Case Circuit Breaker

Answers from our engineering team on installation, compatibility and integration.

01What is the rated current and breaking capacity of the Eaton NZMN1-A80?
The Eaton NZMN1-A80 has a fixed thermal-magnetic trip rating of 80 A and a short-circuit breaking capacity of 50 kA, suited to sub-distribution feeder and motor circuit protection.
02Can the trip setting of the NZMN1-A80 be adjusted on site?
No, the NZMN1-A80 has a factory-fixed thermal-magnetic trip characteristic rather than an adjustable electronic trip unit, providing consistent, tamper-resistant protection suited to standard distribution board applications.
03What accessories are compatible with the NZMN1-A80?
The NZMN1-A80 accepts auxiliary switches, alarm switches, shunt trip releases, and undervoltage releases without modification to the base breaker body, allowing remote monitoring and tripping configurations.
04Is the NZMN1-A80 suitable for legacy panel retrofits?
Yes. The NZM1 frame size and front-frame terminal design are widely used across Eaton distribution board designs, making the NZMN1-A80 a straightforward like-for-like replacement in many existing panels using the NZM1 platform.
05Is Seven Star LLC a trusted supplier for Eaton products?
Yes. Seven Star LLC is the trusted supplier and regional supplier for Eaton in Oman and the GCC, supplying NZM circuit breakers with local technical support.