Brand:

Rittal KEL 9404.600 Ex Stainless Steel Enclosure 380 x 600 x 210 mm

Description

Overview

The Rittal KEL 9404.600 is an empty Ex enclosure with a hinged door, made from stainless steel 1.4301 (AISI 304) and designed for equipment protection by increased safety (Ex e) and by enclosure (Ex tb). It is approved for Zone 1 and 2 as well as Zone 21 and 22 under the ATEX Directive and carries IECEx certification, so it can house terminal blocks, junction arrangements, small control gear and Ex-certified components in areas where a flammable gas or combustible dust atmosphere may occur. Its external dimensions are 380 mm wide, 600 mm high and 210 mm deep, and it ships with a mounting plate, a door and a foamed-in silicone seal.

Seven Star LLC supplies the Rittal KEL 9404.600 to oil and gas facilities, petrochemical plants, power stations and water utilities in the Sultanate of Oman and the GCC. Because an Ex enclosure is selected against a certificate and an installation drawing rather than by appearance alone, our team in Muscat checks the article number, certificate numbers and accessories with you before a quotation is issued.

Explosion Protection of the Rittal KEL 9404.600

Explosion protection category to EN 60079 for the Rittal KEL 9404.600 is increased safety (Ex e) combined with protection by enclosure (Ex tb). The application range is Zone 1 and 2 or 21 and 22, and the ambient temperature range is −30 °C to +80 °C, although Rittal notes that the specified temperatures may be limited by the equipment installed inside. The datasheet lists certificate IEC Ex PTB 09.0035U and PTB 02 ATEX 1082U for the enclosure with door, and the approvals list also includes ATEX quality assurance, IECEx quality assurance, CQC-CCC and UL and C-UL listing.

Because these are component certificates (the “U” suffix), the final assembly with its terminals, glands and equipment must still be assessed as a whole by the installer or system builder. An Ex e enclosure is an empty housing: the certification of the finished panel depends on the components fitted, the cable entries chosen and the heat dissipated inside, and that is why the enclosure is normally specified together with the engineering documentation for the installation.

Engineering Design of the Rittal KEL 9404.600

The enclosure body and door of the Rittal KEL 9404.600 are stainless steel 1.4301 with a brushed surface of grain 400 and a peak-to-valley height below 0.8 µm. The door has an all-round foamed-in silicone seal, and the mounting plate is zinc-plated sheet steel measuring 334 x 570 mm. Two cam locks with a 3 mm double-bit insert secure the door. Ingress protection is IP 66 to IEC 60529 and NEMA 4X, and the datasheet also lists UL 50E type ratings 1, 4, 4X and 12.

Net weight is 14.38 kg and gross weight 15.325 kg, so a single technician can handle the enclosure with suitable lifting aids. Stainless steel resists the humid, salt-laden conditions of coastal installations and the chemical washdown found in process plants, and a stainless mounting arrangement with wall brackets, grounding straps and rails is available as accessories in the Rittal programme.

Key Features of the Rittal KEL 9404.600

These points summarise how the Rittal KEL 9404.600 is specified and used.

  • Ex e and Ex tb protection allows the enclosure to be used in gas Zones 1 and 2 and dust Zones 21 and 22.
  • The stainless steel 1.4301 body and door give corrosion resistance for offshore, coastal and chemical environments.
  • An all-round foamed-in silicone seal provides IP 66 and NEMA 4X ingress protection.
  • The zinc-plated mounting plate provides a grounded surface for installed equipment and supports standard rail mounting.
  • Two cam locks with 3 mm double-bit inserts keep the hinged door closed.
  • IEC Ex PTB 09.0035U and PTB 02 ATEX 1082U certificates are listed for the enclosure with door.
  • Approvals documentation includes attestation of conformity, ATEX and IECEx quality assurance records and instructions in German, English and French.
  • The wider KEL family offers nine door sizes and six screw-fastened cover sizes, so the same design approach extends from small terminal boxes to large control boxes.

Industrial Applications

Rittal describes the stainless steel Ex enclosures for the chemical and petrochemical industries, offshore energy production, the pharmaceutical market, grain handling and processing, and water and wastewater handling. In Oman these markets correspond to upstream oil and gas gathering stations, refineries and storage terminals, power and desalination plants on the coast, and bulk handling at industrial ports such as Sohar and Salalah.

A typical use of the Rittal KEL 9404.600 is as a field junction box or a local control enclosure for instruments in a classified area. Seven Star LLC supplies the enclosure with engineering support in Muscat, and can quote it together with compatible hazardous-area products from the same project scope.

Technical Specifications

The table lists the published data for the Rittal KEL 9404.600, followed by the other door sizes in the family from the Rittal sales sheet.

Parameter Specification
Model Rittal KEL 9404.600 Ex enclosure with hinged door
Dimensions (W x H x D) 380 x 600 x 210 mm
Mounting plate (W x H) 334 x 570 mm, zinc-plated sheet steel
Material Stainless steel 1.4301 (AISI 304), brushed, grain 400
Seal All-round foamed-in silicone
Explosion protection Ex e and Ex tb to EN 60079, Zone 1 and 2 or 21 and 22
Ambient temperature −30 to +80 °C (may be limited by installed equipment)
Protection category IP 66, NEMA 4X, UL 50E Types 1, 4, 4X, 12
Locks 2 cam locks, 3 mm double-bit insert
Certificates IEC Ex PTB 09.0035U, PTB 02 ATEX 1082U
Weight 14.38 kg net, 15.325 kg gross

Other KEL hinged-door sizes listed in the sales sheet, given as height x width x depth in millimetres:

Article H x W x D (mm)
9401.600 300 x 200 x 155
9402.600 300 x 380 x 155
9409.600 380 x 300 x 210
9403.600 380 x 380 x 210
9405.600 600 x 600 x 210
9406.600 760 x 600 x 210
9407.600 760 x 760 x 300
9408.600 1000 x 800 x 300

Request a Quote for Rittal KEL 9404.600

To request a quotation for the Rittal KEL 9404.600, send the Seven Star LLC instrumentation team your zone classification, gas or dust group, ambient temperature, cable entry requirement and any accessories such as wall brackets or rails. We will confirm the article number against the data sheet, advise on stock and lead time for Oman and the GCC, and provide the Rittal data sheet and sales sheet. Related hazardous-area products, such as the Cooper Crouse-Hinds GUE explosionproof junction box, the Cooper Crouse-Hinds GUB01 junction box and the Schneider Electric Spacial SF enclosure, can be quoted in the same enquiry.

Datasheets & Documents
  • PDF Datasheet Rittal KEL 9404.600 Product Data Sheet Download
  • PDF Brochure Rittal Stainless Steel Ex Enclosures Sales Sheet (KEL family) Download
Reviews (0)

Reviews

There are no reviews yet.

How would you rate this product?

It takes about 10 seconds — just tap a star. Your email is never published.

About brand

Rittal is a German manufacturer of enclosures, power distribution, climate control and IT infrastructure, founded in 1961 by Rudolf Loh in Rittershausen, Hesse, as Rudolf Loh Elektrogerätebau. In its first year it launched the first standard enclosure, built in series and available from stock instead of made to order. Rittal is headquartered in Herborn and belongs to the family-owned Friedhelm Loh Group.

Seven Star LLC is an independent supplier in Muscat. We list Rittal enclosures, cooling units and power distribution products for panel builders and maintenance teams in Oman and the GCC.

Rittal company profile

Founded 1961, Rittershausen (Dietzhölztal), Germany, by Rudolf Loh
Headquarters Herborn, Hesse, Germany
Ownership Friedhelm Loh Group (Loh family); sister companies include Eplan and Cideon
Idea Standard enclosures in series production, available from stock
Product families VX25 and AX/KX enclosures, TS 8 baying systems, Blue e+ cooling units and fan-and-filter units, RiLine busbar systems, IT racks and data centre modules

Milestones

  • 1961: Rudolf Loh founds the company and launches the first standard enclosure.
  • 1969: The company takes the Rittal name, according to Rittal.
  • 2021: Rittal marks 60 years.

Rittal product series

Enclosures include the TS 8 free-standing bayable system, AE compact enclosures such as the AE 1380.500 and AE 1034.500, and the CS outdoor wall-mounted enclosure. For hazardous areas there are the KEL 9404.600 stainless steel and AX 9206.100 plastic Ex enclosures. Power distribution is covered by the VX25 Ri4Power switchgear system and its 185 mm busbar system.

Climate control includes Blue e+ wall-mounted cooling units, the TopTherm Blue e SK 3273.500 roof-mounted unit and the LCP Inline CW liquid cooling package for IT racks.

Where Rittal products are used

Machine and process control panels, motor control and power distribution switchboards, outdoor telecom and utility cabinets, junction boxes in hazardous areas and IT racks. In the Gulf, cabinet cooling is often the deciding factor for reliable electronics.

Rittal products we list

Family Examples
Automation Accessories AE 1034.500 Compact Enclosure 300 x 400…, AE 1380.500 Compact Enclosure 380 x 380…, AX 9206.100 Ex Plastic Enclosure 600 x 6…, CS 9791.015 Outdoor Wall-Mounted Enclosure, KEL 9404.600 Ex Stainless Steel Enclosur…, VX25 Ri4Power 185 mm Busbar System, VX25 Ri4Power Switchgear and Power Distr…
Enclosure Climate Control Blue e+ Wall-Mounted Enclosure Cooling U…
Cooling SK 3273.500 TopTherm Blue e Roof-Mounted…
Switchgear, Enclosures & Distribution TS 8 Free-Standing Enclosure System

Ordering Rittal products: what we need

Rittal parts are ordered by a seven-digit model number such as 9404.600. Send that number, or the width, height and depth, material, protection category and door arrangement. For cooling units add the cooling output, rated voltage and mounting cut-out of the unit being replaced; for Ex enclosures, the zone and marking required.

Facts checked against Rittal's own company pages and Friedhelm Loh Group material, October 2026.

FAQ

Questions about the Rittal KEL 9404.600 Ex Stainless Steel Enclosure

Answers from our engineering team on installation, compatibility and integration.

01Which hazardous zones is the Rittal KEL 9404.600 approved for?
It is approved for Zone 1 and 2 or 21 and 22 under the ATEX Directive, with Ex e (increased safety) and Ex tb (protection by enclosure) to EN 60079. The ambient range is minus 30 to plus 80 degrees Celsius, which may be limited by the installed equipment.
02What are the dimensions and ingress protection of the Rittal KEL 9404.600?
The enclosure measures 380 x 600 x 210 mm with a 334 x 570 mm mounting plate. Protection is IP 66 to IEC 60529 and NEMA 4X, with UL 50E type ratings 1, 4, 4X and 12.
03Which certificates are listed for the Rittal KEL 9404.600?
The datasheet lists IEC Ex PTB 09.0035U and PTB 02 ATEX 1082U for the enclosure with door. Approvals also include ATEX and IECEx quality assurance, CQC-CCC and UL and C-UL listing.
04Is the Rittal KEL 9404.600 supplied empty?
Yes. It is an empty enclosure supplied with the door and a zinc-plated mounting plate. Terminals, glands and equipment are selected by the installer, and the finished assembly must be assessed for the hazardous area.
05Does Seven Star LLC supply the Rittal KEL 9404.600 in Oman?
Seven Star LLC supplies Rittal enclosures and climate control equipment to Oman and the GCC, with engineering support in Muscat. Send your zone and size requirement for a quotation.