- Automation & ControlView all 2,659 products
- Automation Accessories
- AC Drives
- PLC & I/O Cards
- Industrial Communications
- Vibration Monitoring
- Controllers & Data Acquisition
- Isolator & Barrier
- Safety Switches & Guard Locking
- Motor Soft Starters
- CCTV & Security
- Encoders
- HMI Displays
- Servo Drives
- Pneumatic Cylinders
- Industrial Computers
- Machine Vision
- Automation Software
- Robotics
Official representative in Oman
Dakota NDT
Ultrasonic thickness gauging is the core of Dakota NDT, the Scotts Valley, USA maker that many inspectors still know as Dakota Ultrasonics. Its instruments measure remaining wall on corroded pipe and vessels, check precision parts, find flaws in welds and monitor bolt elongation. Seven Star LLC is the Dakota NDT agency for Oman and the GCC. We list Dakota corrosion and precision thickness gauges, flaw detectors, transducers, delay line tips and calibration blocks, and supply them with the manufacturer’s documentation.
Read the full brand profile ↓- 34 products
- 11 categories

Showing 25–34 of 34 products
Brand profile
About Dakota NDT
- Headquarters
- Scotts Valley, USA
- Speciality
- Ultrasonic thickness gauges
- Listed with us
- 34 products in 11 categories
Seven Star LLC is the official representative of Dakota NDT in Oman. About our Dakota NDT partnership →
Ultrasonic thickness gauging is the core of Dakota NDT, the Scotts Valley, USA maker that many inspectors still know as Dakota Ultrasonics. Its instruments measure remaining wall on corroded pipe and vessels, check precision parts, find flaws in welds and monitor bolt elongation.
Seven Star LLC is the Dakota NDT agency for Oman and the GCC. We list Dakota corrosion and precision thickness gauges, flaw detectors, transducers, delay line tips and calibration blocks, and supply them with the manufacturer’s documentation.
Dakota NDT product families
Corrosion thickness gauges form the largest group: the CMX10-DL with full waveform capture, the CMX, CX and ZX series and the MX2-DL. For thin or tight-tolerance material Dakota builds the precision line, made up of the PZX1-DL, the PCX8-DL and the PMX series. The RX8-DL sonic tester, the PMX4-DL and the R9 sit in the specialty group. Flaw detection is handled by the handheld FX71-DL and the bench-top FX81-DL, and bolt tension by the BT1-DL, the BT2-DL and the MultiMax remote monitoring system. Dual element transducers pair with corrosion gauges, single element and delay line probes with precision gauges. DakMaster and DakView software take care of data transfer and reporting.
Dakota NDT series at a glance
| Series | Use | Models listed on this site |
|---|---|---|
| Corrosion thickness gauges | Wall-loss measurement on pipe, tanks and vessels with dual element probes | CMX1-DL, CMX2-DL, CMX3-DL, CMX10-DL, CX2, CX4, CX8-DL, MX2-DL, ZX1, ZX3, ZX5-DL, ZX6-DL |
| Precision thickness gauges | Thin and tight-tolerance material with single element and delay line probes | PZX1, PCX8-DL, PMX2-DL, PMX3-DL |
| Specialty gauges | Sonic testers and high penetration gauge | R9, RX8-DL, PMX4-DL |
| Flaw detectors | Handheld and bench-top ultrasonic flaw detectors | FX70-DL, FX71-DL, FX80-DL, FX81-DL |
| Bolt tension monitors | Ultrasonic bolt elongation and load measurement | BT1-DL, BT2-DL, MultiMax, bolt transducers |
| Probes and accessories | Transducers, delay lines, cables, wedges and calibration blocks | dual element, single element, shear wave, delay line tips, cables, wedges, calibration blocks |
Where Dakota ultrasonic thickness gauges are used
Typical jobs are wall-loss surveys on pipelines, tanks, boiler tubes and pressure vessels in oil and gas plants and power stations, thickness checks on machined, drawn or molded parts, weld inspection in fabrication shops, and bolted joints on flanges and turbines where clamp load matters more than torque.
Ordering Dakota gauges and probes: what we need
A useful inquiry names the gauge model, the material, its expected thickness span, the surface temperature and whether the surface is coated. For transducers send the frequency, element diameter, connector type and the gauge the probe will be used with. For calibration blocks give the material and the step sizes you need. If you already own a Dakota instrument, a photo of its label and of the current probe lets us check the match against the manufacturer’s documentation.
Series and model data on this page come from the Dakota NDT product pages and manufacturer documents published on omansevenstar.com.
Dakota NDT products by category
Most viewed Dakota NDT products
Request a Quote for Dakota NDT Products
Looking for Dakota NDT parts not listed here, or pricing for a project? Send us the part numbers and quantities. Seven Star LLC sources genuine Dakota NDT products for customers across Oman and the GCC and replies with a formal quotation.
- Genuine OEM products
- Supply across Oman & the GCC
- Formal quotation from our sales team
Free, no-obligation quotation · takes about 1 minute
Other enquiries: [email protected] · WhatsApp
FAQ
Questions about Dakota NDT
Common questions about Dakota NDT equipment, part numbers and supply to Oman and the GCC.
01Which Dakota thickness gauge suits corrosion surveys and which suits precision work?
Corrosion gauges such as the CMX, CX, ZX and MX2-DL families work with dual element transducers and are meant for pitted or rough back walls on pipe, tanks and vessels. The precision line, PZX1-DL, PCX8-DL and PMX, uses single element and delay line probes for thin, smooth material where resolution matters. Tell us the material and thickness span and we will point to the matching family.
02Can Dakota NDT gauges measure metal thickness through paint or coating?
Some Dakota corrosion gauges offer a thru-paint mode that measures the metal under the coating. The mode depends on the model and works within a limited thickness span, so send us the coating type and the expected wall thickness. We check the datasheet of the gauge you are considering before you place the order.
03Are Dakota transducers interchangeable between gauge models?
Not automatically. A probe has to match the gauge type (dual element for corrosion gauges, single element or delay line for precision gauges), the connector, the frequency and the element diameter the instrument supports. Send the gauge model and the code printed on your present transducer, and we will confirm the compatible Dakota probe from the manufacturer's transducer list.
04Is Dakota NDT the same company as Dakota Ultrasonics?
Yes. Dakota NDT is the present name of the manufacturer that sold its instruments for many years as Dakota Ultrasonics, and older gauges and probes carry that name on the label. Model designations such as MX, CMX, PMX and PZX continue under the Dakota NDT name, so an existing Dakota Ultrasonics instrument can still be identified by its model and serial number.
05Is Seven Star LLC the Dakota NDT agency in Oman?
Yes. Seven Star LLC is the Dakota NDT agency for Oman and the GCC. We supply Dakota thickness gauges, flaw detectors, bolt tension monitors, transducers and accessories, check the model and probe selection against the manufacturer's documentation, and provide the datasheet and the certificates the manufacturer issues with the instrument on request.























