- Automation & ControlView all 2,481 products
- Automation Accessories
- AC Drives
- PLC & I/O Cards
- Industrial Communications
- Vibration Monitoring
- Controllers & Data Acquisition
- Isolator & Barrier
- CCTV & Security
- Motor Soft Starters
- Encoders
- Safety Switches & Guard Locking
- HMI Displays
- Pneumatic Cylinders
- Servo Drives
- Industrial Computers
- Machine Vision
- Automation Software
- Robotics
Brand: Dakota NDT
Dakota Delay Line Tips for Single Element Transducers
Description
Overview
A Dakota Delay Line Tip is a small precision-moulded component fitted to the face of a single element transducer to slow the ultrasonic pulse long enough for the transducer to switch cleanly from transmit to receive mode before the echo returns. Without a Dakota Delay Line Tip, a single-crystal transducer cannot resolve very thin material, because the outgoing pulse and the returning echo overlap in time and the gauge cannot separate them into a valid reading.
As the official authorized partner and exclusive regional representative for Dakota NDT, Seven Star LLC supplies the full Dakota Delay Line Tip range to precision manufacturing, aerospace maintenance and calibration laboratories across Oman and the GCC, backed by manufacturer documentation and local technical support.
Measurement Principle
An acrylic Dakota Delay Line Tip works with the gauge set to interface-echo or echo-echo mode, using the known sound velocity of the acrylic material to create a timed delay before the pulse enters the test piece, which lets the instrument distinguish the front-surface echo from the back-wall echo on thin metals, glass and dense plastics. A graphite Dakota Delay Line Tip is used with the gauge set to plastic mode, matched to the lower acoustic impedance of plastics and similar polymer materials so the signal couples efficiently without the strong reflection loss that would occur with an acrylic tip on a low-density substrate.
The practical result of selecting the correct Dakota Delay Line Tip is the ability to measure material only a fraction of a millimetre thick with confidence, protection for the transducer crystal face from direct wear against the test surface, and a field-replaceable wear part that keeps the transducer itself in service far longer than if the crystal face were exposed to direct contact.
Engineering Design of the Dakota Delay Line Tips
The Dakota Delay Line Tip range is available in a standard screw-in configuration for general delay-line transducers, a cone-tip design that concentrates the contact point for measurement inside narrow grooves and small-radius features, and a pencil-probe tip for the slender pencil-style transducer bodies used on castings, weld caps and recessed assemblies. Diameters are offered in a range of sizes to match the specific transducer body and application, with a consistent thread or friction-fit interface that allows a technician to change tips in the field in seconds.
Acrylic tips are moulded to a tight acoustic-velocity tolerance so that swapping a worn tip does not require a full gauge recalibration beyond a quick verification against a calibration block, while graphite tips are formulated specifically for their acoustic match to plastics rather than for mechanical durability, and are treated as a routine, low-cost consumable wear item rather than a long-life component.
Because a delay line tip is a wear part rather than an electronic component, most field failures show up gradually rather than all at once: a slightly rounded contact edge, a hairline crack from a dropped transducer, or accumulated couplant residue in a fine surface groove can each shift the effective delay time enough to introduce a small but real measurement error before the reading looks obviously wrong. Carrying a small assortment of spare Dakota Delay Line Tips in each transducer diameter used on a project, rather than a single tip per transducer, keeps a precision thickness survey moving without waiting on a replacement part mid-shift.
Key Features
The Dakota Delay Line Tip range keeps single element transducers performing at their designed resolution across every material type in the field.
- Acrylic tips for metals, glass and dense plastics in interface-echo or echo-echo mode.
- Graphite tips matched to the acoustic impedance of plastics in plastic mode.
- Standard, cone-tip and pencil-probe configurations for different access and geometry needs.
- Multiple diameters to match the specific Dakota transducer body in use.
- Field-replaceable in seconds via a consistent thread or friction-fit interface.
- Protects the transducer crystal face from direct wear, extending transducer service life.
- Tight acoustic-velocity tolerance, minimising recalibration effort after a tip change.
- Genuine Dakota NDT manufacture, ensuring consistent performance with PZX1, PCX8 and PMX gauges.
Industrial Applications
A Dakota Delay Line Tip is a routine spares item wherever thin-wall precision measurement is performed on single element transducers across the region’s aerospace, plastics and precision-manufacturing sectors. Aerospace MRO facilities and precision machine shops keep a stock of acrylic tips on hand for thin-walled aluminium and titanium component inspection, since a worn or nicked tip is one of the most common causes of a noisy or unstable reading on an otherwise correctly calibrated precision gauge. Plastics extrusion and moulding plants across Muscat, Sohar and the Salalah economic zones rely on graphite-tipped transducers for wall-thickness verification on finished parts, where an acrylic tip would give an unreliable coupling.
As the officially authorized partner for Dakota NDT, Seven Star LLC distributes the complete Dakota Delay Line Tip range to precision manufacturers, calibration laboratories and inspection contractors throughout Oman and the GCC, supplying common diameters and both tip materials on request as routine consumable spares.
Technical Specifications
The table below summarizes the standard Dakota Delay Line Tip range; exact part numbers vary by diameter and transducer compatibility.
| Parameter | Specification |
|---|---|
| Model | Dakota Delay Line Tips |
| Materials | Acrylic, graphite |
| Configurations | Standard, cone tip, pencil-probe tip |
| Acrylic use mode | Interface-Echo / Echo-Echo |
| Graphite use mode | Plastic Mode |
| Typical materials measured | Thin metals, glass, plastics |
| Interface | Screw-in / friction-fit, field-replaceable |
| Compatible gauges | Dakota PZX1, PCX8, PMX series |
Request a Quote for Dakota Delay Line Tip
Seven Star LLC processes formal RFQs for the complete Dakota Delay Line Tip range, covering the most common diameters and both acrylic and graphite materials, with lead time confirmed at quotation and the full technical datasheet available on request from our instrumentation division. As the authorized partner for Dakota NDT in Oman and the GCC, every Dakota Delay Line Tip order is matched to the customer’s exact transducer and gauge combination.
Browse the full Dakota NDT range or see more NDT Accessories products supplied by Seven Star LLC in Oman and the GCC.
Reviews (0)
How would you rate this product? Cancel reply
About brand
Ultrasonic thickness gauging is the core of Dakota NDT, the Scotts Valley, USA maker that many inspectors still know as Dakota Ultrasonics. Its instruments measure remaining wall on corroded pipe and vessels, check precision parts, find flaws in welds and monitor bolt elongation.
Seven Star LLC is the Dakota NDT agency for Oman and the GCC. We list Dakota corrosion and precision thickness gauges, flaw detectors, transducers, delay line tips and calibration blocks, and supply them with the manufacturer's documentation.
Dakota NDT product families
Corrosion thickness gauges form the largest group: the CMX10-DL with full waveform capture, the CMX, CX and ZX series and the MX2-DL. For thin or tight-tolerance material Dakota builds the precision line, made up of the PZX1-DL, the PCX8-DL and the PMX series. The RX8-DL sonic tester, the PMX4-DL and the R9 sit in the specialty group. Flaw detection is handled by the handheld FX71-DL and the bench-top FX81-DL, and bolt tension by the BT1-DL, the BT2-DL and the MultiMax remote monitoring system. Dual element transducers pair with corrosion gauges, single element and delay line probes with precision gauges. DakMaster and DakView software take care of data transfer and reporting.
Dakota NDT series at a glance
| Series | Use | Models listed on this site |
|---|---|---|
| Corrosion thickness gauges | Wall-loss measurement on pipe, tanks and vessels with dual element probes | CMX1-DL, CMX2-DL, CMX3-DL, CMX10-DL, CX2, CX4, CX8-DL, MX2-DL, ZX1, ZX3, ZX5-DL, ZX6-DL |
| Precision thickness gauges | Thin and tight-tolerance material with single element and delay line probes | PZX1, PCX8-DL, PMX2-DL, PMX3-DL |
| Specialty gauges | Sonic testers and high penetration gauge | R9, RX8-DL, PMX4-DL |
| Flaw detectors | Handheld and bench-top ultrasonic flaw detectors | FX70-DL, FX71-DL, FX80-DL, FX81-DL |
| Bolt tension monitors | Ultrasonic bolt elongation and load measurement | BT1-DL, BT2-DL, MultiMax, bolt transducers |
| Probes and accessories | Transducers, delay lines, cables, wedges and calibration blocks | dual element, single element, shear wave, delay line tips, cables, wedges, calibration blocks |
Where Dakota ultrasonic thickness gauges are used
Typical jobs are wall-loss surveys on pipelines, tanks, boiler tubes and pressure vessels in oil and gas plants and power stations, thickness checks on machined, drawn or molded parts, weld inspection in fabrication shops, and bolted joints on flanges and turbines where clamp load matters more than torque.
Ordering Dakota gauges and probes: what we need
A useful inquiry names the gauge model, the material, its expected thickness span, the surface temperature and whether the surface is coated. For transducers send the frequency, element diameter, connector type and the gauge the probe will be used with. For calibration blocks give the material and the step sizes you need. If you already own a Dakota instrument, a photo of its label and of the current probe lets us check the match against the manufacturer's documentation.
Series and model data on this page come from the Dakota NDT product pages and manufacturer documents published on omansevenstar.com.
Browse Dakota NDT products by category: Corrosion Thickness Gauges, Precision Thickness Gauges, Specialty Thickness Gauges, Handheld Flaw Detectors, Bench-Top Flaw Detectors, Ultrasonic Transducers.
FAQ
Questions about the Dakota Delay Line Tips for Single Element
Answers from our engineering team on installation, compatibility and integration.
01What does a Dakota Delay Line Tip actually do?
A Dakota Delay Line Tip slows the ultrasonic pulse enough for a single element transducer to switch from transmit to receive before the echo returns, which is essential for resolving very thin materials that would otherwise overlap the outgoing and returning signals.
02Should I use an acrylic or graphite tip?
Acrylic tips are used with the gauge in interface-echo or echo-echo mode for metals, glass and dense plastics, while graphite tips are used in plastic mode, matched to the lower acoustic impedance of plastics and similar polymer materials.
03How often do delay line tips need replacing?
Delay line tips are a routine wear consumable, and should be replaced whenever the contact face shows visible wear or nicking, or when readings become noisy or unstable despite a correctly calibrated gauge and clean transducer body.
04Does changing a tip require full gauge recalibration?
Acrylic tips are moulded to a tight acoustic-velocity tolerance, so a quick verification against a calibration block after a tip change is normally sufficient rather than a full gauge recalibration.
05Is Seven Star LLC an authorized representative for Dakota NDT products?
Yes. Seven Star LLC is the officially authorized partner and exclusive regional representative for Dakota NDT in Oman and the GCC, supplying genuine delay line tips with local technical support.


















Reviews
There are no reviews yet.