Brand:

Dakota Single Element Transducers for Ultrasonic Thickness Gauging

Description

Overview

A Dakota Single Element Transducer houses one piezoelectric crystal that both transmits and receives the ultrasonic pulse, typically fitted with a delay line to separate the initial excitation pulse from the returning echo. This design gives a Dakota Single Element Transducer the fine near-surface resolution needed to measure thin-wall metals, plastics, composites and coated substrates that a dual element probe cannot resolve accurately, making it the standard transducer choice for Dakota’s PZX1, PCX8 and PMX precision thickness gauge families.

As the official authorized partner and exclusive regional representative for Dakota NDT, Seven Star LLC supplies the full Dakota Single Element Transducer range to precision manufacturing, aerospace maintenance and quality-control laboratories across Oman and the GCC, with manufacturer documentation and local technical support.

Measurement Principle

Inside a Dakota Single Element Transducer, a single crystal fires a short ultrasonic burst through a delay-line tip made of acrylic or graphite, which slows the pulse just long enough for the transducer to switch from transmit to receive mode before the echo returns from the far wall. Because the same crystal handles both transmission and reception, the design avoids the crystal-to-crystal alignment tolerances of a dual element probe, giving a Dakota Single Element Transducer excellent resolution on thin sections, small-diameter tubing and precision-machined components.

The practical result is a probe capable of resolving material as thin as a fraction of a millimetre with no moving parts, no pressure applied beyond light contact force, and no risk of surface damage to finished or coated parts. This is why a Dakota Single Element Transducer is the default choice wherever thin-wall precision, not corrosion-survey ruggedness, is the priority.

Engineering Design of the Dakota Single Element Transducers

The Dakota Single Element Transducer family is built around compact potted housings in standard, delay-line and pencil-probe configurations, with contact diameters as small as a few millimetres for measuring inside narrow grooves, small-radius fillets and thin tubing walls. Delay-line tips are interchangeable on several models, letting the same Dakota Single Element Transducer body serve multiple material types simply by swapping the acrylic or graphite tip to suit metal, plastic or composite substrates.

Cable exit follows the same Microdot or Lemo connector standards used across the Dakota instrument range, and pencil-style variants extend the crystal on a slender probe body for reaching recessed or hard-to-access measurement points on castings, weld caps and machined assemblies. Frequency options from 500 kHz through 20 MHz let a Dakota Single Element Transducer be matched precisely to the resolution and penetration required by the application.

Beyond the standard delay-line configuration, several probe bodies in the range accept threaded or slip-fit tip adapters, allowing a technician to carry one transducer body and a small set of interchangeable tips into the field rather than a full case of dedicated probes for every material. This modularity reduces calibration downtime, since switching a tip only requires re-zeroing the gauge against the appropriate calibration block rather than swapping the entire probe assembly and re-establishing the cable connection.

Key Features

Every Dakota Single Element Transducer in the range is engineered for precision thickness applications across the region’s manufacturing and inspection sectors.

  • Single-crystal transmit/receive design delivering fine near-surface resolution on thin materials.
  • Frequency options from 500 kHz to 20 MHz to match resolution and penetration to the application.
  • Interchangeable acrylic and graphite delay-line tips for metal, plastic and composite substrates.
  • Pencil-probe variants for recessed, small-radius and hard-to-reach measurement points.
  • Contact diameters small enough for thin tubing and narrow-groove measurement.
  • Direct compatibility with Dakota’s PZX1, PCX8 and PMX precision thickness gauge ranges.
  • No surface damage risk, suitable for finished, coated and precision-machined parts.
  • Genuine Dakota NDT manufacture, ensuring calibration consistency with the host gauge.

Industrial Applications

A Dakota Single Element Transducer is the standard tool wherever thin-wall precision measurement matters more than ruggedness against corrosion or scale. Aerospace MRO shops and precision machine shops across the region use a Dakota Single Element Transducer to verify remaining wall thickness on thin-walled aluminium and titanium components after machining or chemical milling, while plastics and composite manufacturers use graphite-tipped variants to check wall consistency on extruded and moulded parts. Pharmaceutical and semiconductor facilities rely on the same probes for thin-film and coated-substrate thickness verification in quality control.

As the officially authorized partner for Dakota NDT, Seven Star LLC distributes the complete Dakota Single Element Transducer line to precision manufacturers, calibration laboratories and inspection contractors throughout Oman and the GCC, including hospitality and hospital-complex maintenance teams across Muscat, Sohar and the Salalah economic zones who need reliable thin-wall verification on pipework and fabricated components.

Technical Specifications

The table below summarizes the standard Dakota Single Element Transducer range; exact part numbers vary by frequency, diameter and tip configuration.

Parameter Specification
Model Dakota Single Element Transducers
Design Single-crystal, delay-line or pencil configuration
Frequency range 500 kHz – 20 MHz
Delay-line tip materials Acrylic, graphite
Housing Potted, standard or pencil-probe body
Typical materials Thin metals, plastics, composites, coated substrates
Compatible gauges Dakota PZX1, PCX8, PMX series
Connector Microdot / Lemo (gauge dependent)
Interchangeable tips Yes, on delay-line variants

Request a Quote for Dakota Single Element Transducer

Seven Star LLC processes formal RFQs for the complete Dakota Single Element Transducer range, covering the most common frequencies and tip configurations, with lead time confirmed at quotation and the full technical datasheet available on request from our instrumentation division. As the authorized partner for Dakota NDT in Oman and the GCC, every Dakota Single Element Transducer order is matched to the customer’s exact gauge model and material application, ensuring calibration compatibility.

Also available: Dakota Dual Element Transducers for Corrosion Thickness Gauges

Reviews (0)

Reviews

There are no reviews yet.

How would you rate this product?

It takes about 10 seconds — just tap a star. Your email is never published.

About brand

Ultrasonic thickness gauging is the core of Dakota NDT, the Scotts Valley, USA maker that many inspectors still know as Dakota Ultrasonics. Its instruments measure remaining wall on corroded pipe and vessels, check precision parts, find flaws in welds and monitor bolt elongation.

Seven Star LLC is the Dakota NDT agency for Oman and the GCC. We list Dakota corrosion and precision thickness gauges, flaw detectors, transducers, delay line tips and calibration blocks, and supply them with the manufacturer's documentation.

Dakota NDT product families

Corrosion thickness gauges form the largest group: the CMX10-DL with full waveform capture, the CMX, CX and ZX series and the MX2-DL. For thin or tight-tolerance material Dakota builds the precision line, made up of the PZX1-DL, the PCX8-DL and the PMX series. The RX8-DL sonic tester, the PMX4-DL and the R9 sit in the specialty group. Flaw detection is handled by the handheld FX71-DL and the bench-top FX81-DL, and bolt tension by the BT1-DL, the BT2-DL and the MultiMax remote monitoring system. Dual element transducers pair with corrosion gauges, single element and delay line probes with precision gauges. DakMaster and DakView software take care of data transfer and reporting.

Dakota NDT series at a glance

Series Use Models listed on this site
Corrosion thickness gauges Wall-loss measurement on pipe, tanks and vessels with dual element probes CMX1-DL, CMX2-DL, CMX3-DL, CMX10-DL, CX2, CX4, CX8-DL, MX2-DL, ZX1, ZX3, ZX5-DL, ZX6-DL
Precision thickness gauges Thin and tight-tolerance material with single element and delay line probes PZX1, PCX8-DL, PMX2-DL, PMX3-DL
Specialty gauges Sonic testers and high penetration gauge R9, RX8-DL, PMX4-DL
Flaw detectors Handheld and bench-top ultrasonic flaw detectors FX70-DL, FX71-DL, FX80-DL, FX81-DL
Bolt tension monitors Ultrasonic bolt elongation and load measurement BT1-DL, BT2-DL, MultiMax, bolt transducers
Probes and accessories Transducers, delay lines, cables, wedges and calibration blocks dual element, single element, shear wave, delay line tips, cables, wedges, calibration blocks

Where Dakota ultrasonic thickness gauges are used

Typical jobs are wall-loss surveys on pipelines, tanks, boiler tubes and pressure vessels in oil and gas plants and power stations, thickness checks on machined, drawn or molded parts, weld inspection in fabrication shops, and bolted joints on flanges and turbines where clamp load matters more than torque.

Ordering Dakota gauges and probes: what we need

A useful inquiry names the gauge model, the material, its expected thickness span, the surface temperature and whether the surface is coated. For transducers send the frequency, element diameter, connector type and the gauge the probe will be used with. For calibration blocks give the material and the step sizes you need. If you already own a Dakota instrument, a photo of its label and of the current probe lets us check the match against the manufacturer's documentation.

Series and model data on this page come from the Dakota NDT product pages and manufacturer documents published on omansevenstar.com.

FAQ

Questions about the Dakota Single Element Transducers for Ultrasonic

Answers from our engineering team on installation, compatibility and integration.

01What is a Dakota Single Element Transducer used for?
A Dakota Single Element Transducer is used for precision ultrasonic thickness measurement on thin metals, plastics and composites, where fine near-surface resolution matters more than penetrating scale or corrosion.
02How thin a material can these transducers measure?
With the correct delay-line tip and frequency, a Dakota Single Element Transducer can resolve material as thin as a fraction of a millimetre, making it suitable for thin-walled aerospace components, precision-machined parts and coated substrates.
03Which delay-line tip should I use for plastics versus metals?
Acrylic delay-line tips are used with the gauge set to interface-echo or echo-echo mode for metals, glass and thin plastics, while graphite tips are used in plastic mode for thin plastics and similar low-acoustic-impedance materials.
04Which Dakota gauges use the Single Element Transducer range?
The Single Element range is the standard transducer for Dakota's PZX1, PCX8 and PMX precision thickness gauges, with pencil-probe variants available for recessed or hard-to-reach measurement points.
05Is Seven Star LLC an authorized representative for Dakota NDT products?
Yes. Seven Star LLC is the officially authorized partner and exclusive regional representative for Dakota NDT in Oman and the GCC, supplying genuine transducers with local technical support.