Brand:

Eaton M22-KC10 RMQ-Titan Contact Element 1 N/O Base Fixing

Description

M22-KC10 RMQ-Titan contact element, 1 N/O, base fixing, screw terminals

The Eaton Eaton M22-KC10 (catalog number 216380) is a single-pole contact element for the RMQ-Titan M22 system, with one normally open (N/O) contact, screw terminals and base fixing. It does the actual switching behind a pushbutton, selector or emergency-stop front element. The datasheet title summarises its capability as 24 V 3 A and 220, 230 or 240 V 6 A. Seven Star LLC supplies the Eaton M22-KC10 in Oman and the GCC for panel builders and maintenance teams.

Reading the M22-KC10 part number

M22 is the RMQ-Titan system. K stands for contact element, C marks the base-fixing variant, and 10 means one N/O contact and no N/C contact. The M22-KC01 is its normally closed counterpart. The Q-suffixed M22-KC10Q is listed as the alternate catalog number. A variant without the C, the M22-K10, is a separate front-fixing part, so do not substitute one for the other without checking the mounting.

Eaton M22-KC10 technical specifications

Parameter Specification
Manufacturer / part number Eaton / M22-KC10 (catalog number 216380)
Basic function Contact element for M22 actuators
Contact configuration 1 N/O (normally open)
Connection technique Screw terminals
Fixing Base fixing
Degree of protection IP20
Rated operational current AC-15 115 V: 6 A; 220/230/240 V: 6 A; 380/400/415 V: 4 A; 500 V: 2 A
Rated operational current DC-13 24 V: 3 A; 42 V: 1.7 A; 60 V: 1.2 A; 110 V: 0.6 A; 220 V: 0.3 A
Rated insulation voltage Ui 500 V
Rated impulse withstand voltage Uimp 6,000 V AC
Overvoltage category / pollution degree III / 3
Max. short-circuit protective device Fuseless: PKZM0-10 or FAZ-B6/1; fuse gG/gL 10 A
Rated conditional short-circuit current Iq 1 kA
Electrical lifespan, AC-15, 230 V 1.6 million operations at 0.5 A; 1 million at 1.0 A; 0.7 million at 3.0 A
Mechanical lifespan More than 5 million operations
Operating frequency Up to 3,600 operations per hour
Terminal capacity 0.75 to 2.5 mm² solid; 0.5 to 2.5 mm² stranded; 0.5 to 1.5 mm² flexible with ferrule
Operating torque, screw terminals Up to 0.8 Nm
Control circuit reliability Failure rate below 10 to the power of -7 at 24 V DC / 5 mA; below 5 x 10 to the power of -6 at 5 V DC / 1 mA
Ambient temperature –25 to +70 °C, open
Shock resistance Above 30 g, 11 ms half-sine, to IEC 60068-2-27
Standards and approvals IEC 60947-5-1; IEC/EN 60947-5; UL 508; CSA-C22.2 No. 14-05 and No. 94-91; CE marking

Switching capacity and protection of the M22-KC10

The element is rated for utilisation category AC-15 (control of electromagnetic loads) and DC-13. At AC-15 it carries 6 A at 115 V and at 220 to 240 V, 4 A at 380 to 415 V and 2 A at 500 V. At DC-13 it carries 3 A at 24 V, falling to 0.3 A at 220 V. These figures matter when the button directly switches a contactor coil: check the coil inrush and holding current at your control voltage against the table.

The datasheet gives the maximum short-circuit protective device as a PKZM0-10 or FAZ-B6/1 breaker, or a 10 A gG/gL fuse, and a rated conditional short-circuit current of 1 kA. The rated insulation voltage is 500 V and the impulse withstand 6,000 V in overvoltage category III and pollution degree 3.

Electrical life depends on the load. At 230 V AC-15 the datasheet lists 1.6 million operations at 0.5 A, 1 million at 1.0 A and 0.7 million at 3.0 A. Mechanical life exceeds 5 million operations. For low-level signals, the control circuit reliability is given as a failure rate below 10 to the power of -7 at 24 V DC and 5 mA, and below 5 x 10 to the power of -6 at 5 V DC and 1 mA, which makes the element suitable for PLC inputs.

Where the M22-KC10 is fitted

The contact element clips onto the M22 mounting adapter behind a front element. The datasheet notes that up to three elements can be fitted per enclosure base. It works behind pushbutton actuators such as the M22-D-G, M22-D-R and M22-D-W and behind the emergency-stop mushrooms M22-PV and M22-PVT, where the datasheet of the mushrooms limits the number of contacts to four single elements.

The M22-KC10 is the normally open choice for start and command functions. A stop function normally uses the normally closed M22-KC01, which has positive opening. Combining the two in one station gives a normally open start and normally closed stop with a single 22.5 mm hole each.

Selecting the M22-KC10: checklist

  • Confirm N/O contact, base fixing, screw terminals. For a front-fixing element, a different part is needed.
  • Check the load against the AC-15 and DC-13 table at your control voltage.
  • Check the upstream short-circuit protection against the 10 A fuse or PKZM0-10 limit.
  • Count the contacts needed per button and respect the per-base limit.
  • Confirm that the front element and adapter are compatible with base-fixing elements.

Installation, commissioning and maintenance of the M22-KC10

Clip the element into the adapter, strip conductors, fit ferrules to stranded wire and tighten the terminals to no more than 0.8 Nm. After wiring, operate the front element and measure continuity at the terminals: the N/O contact closes on actuation and opens on release.

The element is IP20, so it relies on the enclosure for protection. At the end of its electrical life, a contact element is replaced alone and the front element stays in the door. Replace elements in sets when a station switches heavy loads.

Typical applications of the M22-KC10 in Oman and the GCC

Start contacts in motor control circuits on pumps, fans and compressors, command contacts for PLC inputs, and auxiliary signal contacts behind pushbuttons and selector switches in oil and gas, utility and water facilities. Maintenance stores also keep the M22-KC10 as a common spare because it fits many M22 front elements.

M22 devices related to the M22-KC10

The table lists catalog numbers of M22 parts that are commonly ordered together. Combinations depend on your design, so treat it as a map of the family and not as a bill of material.

Model Catalog number Description
M22-D-G 216596 Flat pushbutton actuator, green, momentary
M22-D-R 216594 Flat pushbutton actuator, red, momentary
M22-D-W 216592 Flat pushbutton actuator, white, momentary
M22-DL-R 216925 Illuminated flat pushbutton actuator, red, momentary
M22-L-R 216772 Flush indicator light, red lens
M22-L-Y 216774 Flush indicator light, yellow lens
M22-LED-R 216558 LED element, red, 12–30 V AC/DC
M22-LED-G 216559 LED element, green, 12–30 V AC/DC
M22-KC10 216380 Contact element, 1 N/O, base fixing, screw
M22-KC01 216382 Contact element, 1 N/C, base fixing, screw
M22-PV 216876 Emergency-stop mushroom, pull-to-release
M22-PVT 263467 Emergency-stop mushroom, turn-to-release

Information to send with an RFQ for M22-KC10

  • Exact model M22-KC10 (catalog number 216380) and the quantity, including spares.
  • Number of contacts per button and their configuration (N/O or N/C).
  • Control voltage and load to be switched.
  • Front elements the contacts will be fitted behind.
  • Delivery location (Muscat, Sohar, Salalah or elsewhere in the GCC) and the date you need the goods.
  • Any documents you need with the quotation, such as an installation leaflet or a declaration of conformity.

Documents and quotation

The manufacturer datasheet for M22-KC10 is attached on this page, so you can check the ratings and approvals against your project before ordering. Installation leaflets and declarations of conformity can be requested separately.

Seven Star LLC supplies Eaton industrial control products in Oman and the GCC. To request a quotation, send model M22-KC10, the quantity and your delivery location, and we will confirm availability and lead time.

Other Models in the Eaton M22 Rmqtitan Range

Seven Star LLC supplies models from the Eaton M22 Rmqtitan range in Oman and the GCC. Compare the related models below and request a quote for the one that matches your application.

ModelCategory
Eaton M22-D-G RMQ-Titan Green Flat Pushbutton ActuatorAutomation AccessoriesView details
Eaton M22-D-R RMQ-Titan Red Flat Pushbutton ActuatorAutomation AccessoriesView details
Eaton M22-D-W RMQ-Titan White Flat Pushbutton ActuatorAutomation AccessoriesView details
Eaton M22-DL-R RMQ-Titan Red Illuminated Pushbutton ActuatorAutomation AccessoriesView details
Eaton M22-L-R RMQ-Titan Red Flush Indicator LightAutomation AccessoriesView details
Eaton M22-L-Y RMQ-Titan Yellow Flush Indicator LightAutomation AccessoriesView details
Eaton M22-LED-R RMQ-Titan Red LED Element 12-30 V AC/DCAutomation AccessoriesView details
Eaton M22-LED-G RMQ-Titan Green LED Element 12-30 V AC/DCAutomation AccessoriesView details
Eaton M22-KC10 RMQ-Titan Contact Element 1 N/O Base FixingAutomation AccessoriesYou are viewing this model
Datasheets & Documents
Reviews (0)

Reviews

There are no reviews yet.

How would you rate this product?

It takes about 10 seconds — just tap a star. Your email is never published.

About brand

Eaton is a power management company that began in 1911, when Joseph O. Eaton started a truck axle business in New York and moved it to Cleveland, Ohio, in 1914. It grew from vehicle components into electrical equipment, hydraulics and aerospace systems. Since buying Cooper Industries in 2012, Eaton has been incorporated in Ireland with its head office in Dublin, and it is listed on the New York Stock Exchange.

Seven Star LLC lists Eaton NZM molded case circuit breakers, PKZM0 motor-protective circuit breakers and Bussmann series Class J fuses, and supplies them to panel builders and maintenance teams in Oman and the GCC.

Eaton company profile

Founded 1911, New York, USA, by Joseph O. Eaton
Early move Cleveland, Ohio, 1914
Headquarters Dublin, Ireland, since the 2012 Cooper Industries acquisition
Listing New York Stock Exchange (ETN)
Brands Eaton, Moeller, Bussmann, Crouse-Hinds, MTL and MEDC
Product families FAZ and PL miniature circuit breakers, NZM moulded-case breakers, DILM contactors, PowerXL variable frequency drives, 9PX and 93PM UPS, Bussmann fuses, hazardous-area enclosures and signalling

Milestones

  • 1911: Joseph O. Eaton starts an axle business in New York.
  • 1914: The business moves to Cleveland.
  • 2012: Eaton acquires Cooper Industries and redomiciles in Ireland.

Eaton circuit protection listed here

The NZMN1-A80 is a frame size 1 molded case circuit breaker rated 80 A with a thermomagnetic release for cable and system protection. The PKZM0-1,6 is a motor-protective circuit breaker whose overload release is adjustable from 1 to 1.6 A, used as a manual motor starter. The LPJ-35SP is a Bussmann series Low-Peak Class J time-delay fuse rated 35 A at 600 V AC. Older NZM and PKZ devices carry the Moeller name on the nameplate, and the type designations are the same.

Where Eaton breakers and fuses are used

Motor control centers, feeder panels, machine control cabinets and UL-style fused disconnects.

Eaton products we list

Family Examples
Circuit Breakers LPJ-35SP Class J Time-Delay Fuse, NZMN1-A80 Molded Case Circuit Breaker, NZMN2-A250 Molded Case Circuit Breaker, NZMN3-AE400 Molded Case Circuit Breaker, PKZM0-1
AC Drives DA1-342D2FB-A20C AC Drive, PowerXL DG1-34140FN-C21C Variable Freque…

Ordering Eaton parts: what we need

Send the full type and article number, the number of poles, the current rating or setting range, and any accessories such as auxiliary contacts, trip releases or rotary handles.

Facts checked against Eaton's corporate history and investor materials, October 2026.

FAQ

Questions about the Eaton M22-KC10 RMQ-Titan Contact Element 1 N/O Base

Answers from our engineering team on installation, compatibility and integration.

01What is the M22-KC10?
It is a one-pole normally open contact element for the RMQ-Titan M22 system, with screw terminals and base fixing. It is fitted behind a front element.
02What current can the M22-KC10 switch?
AC-15 rating is 6 A at 220 to 240 V and 4 A at 380 to 415 V. DC-13 rating is 3 A at 24 V and 0.3 A at 220 V.
03What short-circuit protection does the M22-KC10 need?
The datasheet gives a PKZM0-10 or FAZ-B6/1 breaker or a 10 A gG/gL fuse as the maximum protective device.
04How many M22-KC10 can go on one base?
The datasheet notes that up to three elements can be fitted per enclosure base. Emergency-stop mushrooms limit the number of contacts further.
05Is the M22-KC10 suitable for low-level PLC signals?
Yes. The datasheet gives a failure rate below 10 to the power of -7 at 24 V DC and 5 mA, and below 5 x 10 to the power of -6 at 5 V DC and 1 mA.