- Automation & ControlView all 2,613 products
- Automation Accessories
- AC Drives
- PLC & I/O Cards
- Industrial Communications
- Vibration Monitoring
- Controllers & Data Acquisition
- Isolator & Barrier
- Safety Switches & Guard Locking
- Motor Soft Starters
- CCTV & Security
- Encoders
- HMI Displays
- Pneumatic Cylinders
- Servo Drives
- Industrial Computers
- Machine Vision
- Automation Software
- Robotics
Brand: Eaton
Eaton M22-L-R RMQ-Titan Red Flush Indicator Light
Description
M22-L-R RMQ-Titan indicator light, flush, red
The Eaton Eaton M22-L-R (catalog number 216772) is a flush indicator light front element in the RMQ-Titan M22 system, with a red lens. It signals a state: motor running, fault present, supply on, trip. On its own it holds no lamp. The light source is a separate LED element mounted behind it, and for a red lens the manufacturer specifies the red element M22-LED-R. Seven Star LLC supplies the Eaton M22-L-R in Oman and the GCC for panel builders, OEMs and plant maintenance.
What the M22-L-R code tells you
M22 is the 22.5 mm RMQ-Titan system, L is the indicator light, and R is the red lens colour. The Q-suffixed M22-L-RQ appears as the alternate catalog number. The lens is flat and round, and the data sheet lists a chrome-coloured plastic front ring and a hole diameter of 22.5 mm.
Eaton M22-L-R technical specifications
| Parameter | Specification |
|---|---|
| Manufacturer / part number | Eaton / M22-L-R (catalog number 216772) |
| Basic function | Indicator light, flush lens |
| Lens colour | Red |
| Lens type | Flat, round |
| Number of built-in signal lights | 1 |
| Front ring | Plastic, chrome colour |
| Hole diameter | 22.5 mm |
| Degree of protection | IP66, IP67, IP69K; front IP67/IP69K |
| Terminal capacity, solid and stranded | 0.5 to 1.5 mm² |
| Rated impulse withstand voltage Uimp | 4,000 V AC |
| Rated insulation voltage Ui | 250 V |
| Overvoltage category / pollution degree | III / 3 |
| Ambient temperature | –25 to +70 °C, open |
| Shock resistance | 30 g, 11 ms half-sine, to IEC 60068-2-27 |
| Climatic proofing | Damp heat, constant (IEC 60068-2-78) and cyclic (IEC 60068-2-30) |
| Standards and approvals | IEC/EN 60947, VDE 0660; UL 508; CSA-C22.2 No. 14-05 and No. 94-91; CE marking |
| SmartWire-DT | Connection possible with SWD-RMQ connections |
How the M22-L-R displays a signal
The lens is a diffuser. When the LED element behind it is energised, the lens glows red, and when it is off the lens looks dark red under room light. Because the lens carries no electronics, the whole signal behaviour is decided by the element and the circuit that drives it. A steady light, a flashing light fed by a PLC output or a light that follows a relay contact all use the same M22-L-R.
The lens is not an actuator. If you need a button that lights up, the illuminated pushbutton actuator M22-DL-R is the correct front element. The M22-L-R is for pure indication.
Choosing the LED element and supply for the M22-L-R
The manufacturer states that red M22 lit devices work only with red LED elements, so the M22-L-R is paired with the M22-LED-R. That element runs from 12 to 30 V AC/DC at 50/60 Hz, draws 8 to 15 mA and consumes at most 0.26 W at 24 V. A 24 V DC control supply is therefore the simplest option, and a PLC digital output usually drives it directly.
For 230 V circuits, Eaton lists separate 85 to 264 V elements in the M22-LED230 series. Select one of those instead of the 12 to 30 V element if the signal comes straight from mains. Confirm the exact order code for the colour before purchasing.
Selecting the M22-L-R: checklist
- Confirm red lens colour and that the function is indication only.
- Select the matching red LED element for your control voltage.
- Check the 22.5 mm cut-out and the door thickness.
- Confirm the colour convention of your project, for example red for a fault or stop condition.
- Decide whether the same panel also needs a yellow or white lamp, and keep spare elements per colour.
Installation and maintenance of the M22-L-R
Mount the lens in the door, add the adapter from behind and clip the LED element to it. Wire the LED element with 0.75 to 2.5 mm² solid or 0.5 to 2.5 mm² stranded conductors, tightened to up to 0.8 Nm. Commission by energising the signal and confirming that the lens is evenly lit.
LED elements are sealed electronics and are replaced, not repaired. Because the lens and the element are separate parts, a dark indicator is usually fixed by replacing the element only.
Typical applications of the M22-L-R in Oman and the GCC
Fault and trip indication on motor control centres and variable-speed drive panels, high-temperature alarms on generator sets, and run or stop signals on pumps in oil and gas and water facilities. Door-mounted indicators in switchrooms where the sealed front and the IP69K rating allow cleaning in dusty and humid conditions.
M22 devices related to the M22-L-R
The table lists catalog numbers of M22 parts that are commonly ordered together. Combinations depend on your design, so treat it as a map of the family and not as a bill of material.
| Model | Catalog number | Description |
|---|---|---|
| M22-D-G | 216596 | Flat pushbutton actuator, green, momentary |
| M22-D-R | 216594 | Flat pushbutton actuator, red, momentary |
| M22-D-W | 216592 | Flat pushbutton actuator, white, momentary |
| M22-DL-R | 216925 | Illuminated flat pushbutton actuator, red, momentary |
| M22-L-R | 216772 | Flush indicator light, red lens |
| M22-L-Y | 216774 | Flush indicator light, yellow lens |
| M22-LED-R | 216558 | LED element, red, 12–30 V AC/DC |
| M22-LED-G | 216559 | LED element, green, 12–30 V AC/DC |
| M22-KC10 | 216380 | Contact element, 1 N/O, base fixing, screw |
| M22-KC01 | 216382 | Contact element, 1 N/C, base fixing, screw |
| M22-PV | 216876 | Emergency-stop mushroom, pull-to-release |
| M22-PVT | 263467 | Emergency-stop mushroom, turn-to-release |
Information to send with an RFQ for M22-L-R
- Exact model M22-L-R (catalog number 216772) and the quantity, including spares.
- Control voltage for the LED element (12 to 30 V AC/DC or mains).
- LED element quantity, matched to the lens colour.
- Panel cut-out and door thickness.
- Delivery location (Muscat, Sohar, Salalah or elsewhere in the GCC) and the date you need the goods.
- Any documents you need with the quotation, such as an installation leaflet or a declaration of conformity.
Documents and quotation
The manufacturer datasheet for M22-L-R is attached on this page, so you can check the ratings and approvals against your project before ordering. Installation leaflets and declarations of conformity can be requested separately.
Seven Star LLC supplies Eaton industrial control products in Oman and the GCC. To request a quotation, send model M22-L-R, the quantity and your delivery location, and we will confirm availability and lead time.
Other Models in the Eaton M22 Rmqtitan Range
Seven Star LLC supplies models from the Eaton M22 Rmqtitan range in Oman and the GCC. Compare the related models below and request a quote for the one that matches your application.
| Model | Category | |
|---|---|---|
| Eaton M22-D-G RMQ-Titan Green Flat Pushbutton Actuator | Automation Accessories | View details |
| Eaton M22-D-R RMQ-Titan Red Flat Pushbutton Actuator | Automation Accessories | View details |
| Eaton M22-D-W RMQ-Titan White Flat Pushbutton Actuator | Automation Accessories | View details |
| Eaton M22-DL-R RMQ-Titan Red Illuminated Pushbutton Actuator | Automation Accessories | View details |
| Eaton M22-L-R RMQ-Titan Red Flush Indicator Light | Automation Accessories | You are viewing this model |
Datasheets & Documents
- Datasheet Eaton M22-L-R Datasheet Download
Reviews (0)
How would you rate this product? Cancel reply
About brand
Eaton is a power management company that began in 1911, when Joseph O. Eaton started a truck axle business in New York and moved it to Cleveland, Ohio, in 1914. It grew from vehicle components into electrical equipment, hydraulics and aerospace systems. Since buying Cooper Industries in 2012, Eaton has been incorporated in Ireland with its head office in Dublin, and it is listed on the New York Stock Exchange.
Seven Star LLC lists Eaton NZM molded case circuit breakers, PKZM0 motor-protective circuit breakers and Bussmann series Class J fuses, and supplies them to panel builders and maintenance teams in Oman and the GCC.
Eaton company profile
| Founded | 1911, New York, USA, by Joseph O. Eaton |
|---|---|
| Early move | Cleveland, Ohio, 1914 |
| Headquarters | Dublin, Ireland, since the 2012 Cooper Industries acquisition |
| Listing | New York Stock Exchange (ETN) |
| Brands | Eaton, Moeller, Bussmann, Crouse-Hinds, MTL and MEDC |
| Product families | FAZ and PL miniature circuit breakers, NZM moulded-case breakers, DILM contactors, PowerXL variable frequency drives, 9PX and 93PM UPS, Bussmann fuses, hazardous-area enclosures and signalling |
Milestones
- 1911: Joseph O. Eaton starts an axle business in New York.
- 1914: The business moves to Cleveland.
- 2012: Eaton acquires Cooper Industries and redomiciles in Ireland.
Eaton circuit protection listed here
The NZMN1-A80 is a frame size 1 molded case circuit breaker rated 80 A with a thermomagnetic release for cable and system protection. The PKZM0-1,6 is a motor-protective circuit breaker whose overload release is adjustable from 1 to 1.6 A, used as a manual motor starter. The LPJ-35SP is a Bussmann series Low-Peak Class J time-delay fuse rated 35 A at 600 V AC. Older NZM and PKZ devices carry the Moeller name on the nameplate, and the type designations are the same.
Where Eaton breakers and fuses are used
Motor control centers, feeder panels, machine control cabinets and UL-style fused disconnects.
Eaton products we list
Ordering Eaton parts: what we need
Send the full type and article number, the number of poles, the current rating or setting range, and any accessories such as auxiliary contacts, trip releases or rotary handles.
Facts checked against Eaton's corporate history and investor materials, October 2026.
Browse Eaton products by category: Circuit Breaker.
FAQ
Questions about the Eaton M22-L-R RMQ-Titan Red Flush Indicator Light
Answers from our engineering team on installation, compatibility and integration.
01What does the M22-L-R do?
It is a flush red indicator light front element for a 22.5 mm hole. It shows a signal when an LED element behind it is energised, and it is not an actuator.
02Which LED element goes with the M22-L-R?
The manufacturer states that red lenses are used only with red LED elements, so the M22-LED-R is the match. It runs from 12 to 30 V AC/DC.
03Can the M22-L-R be driven from 230 V?
Yes, but with a different LED element. Eaton lists M22-LED230 elements for 85 to 264 V. The 12 to 30 V element must not be connected to mains.
04What ingress protection does the M22-L-R have?
IP66, IP67 and IP69K are listed, and the front is IP67/IP69K. The panel itself needs matching sealing.
05What is the alternate catalog number of the M22-L-R?
The Q-suffixed number M22-L-RQ is listed as the alternate catalog number for the same device.


















Reviews
There are no reviews yet.