Brand:

VEGA VEGAKON 66 Conductive Multi-Rod Level Switch

Description

VEGAKON 66 conductive multi-rod level switch for liquids

The VEGAKON 66 is a compact conductive level switch with two or three rod electrodes, designed for water and aqueous liquids. It detects the moment the electrodes are covered by a conductive liquid, which makes it a simple and low-cost choice for overfill protection, pump control and dry-run protection. Seven Star LLC supplies the VEGAKON 66 in Oman and the GCC as an independent supplier in Muscat, and this page explains how the type works and how to specify it.

Operating principle of the VEGAKON 66

A conductive probe measures the electrical resistance of the liquid between its electrodes. When the rods are covered, a small alternating current flows, and the electronics check its amplitude and phase and turn it into a switching signal. A ground electrode and a measuring electrode are needed; in a metal vessel the wall can act as ground, but with the VEGAKON 66 a ground electrode must be provided, and that is why it carries more than one rod. The longest rod acts as the ground electrode, and the switching point is determined by the rod length. The sensor has no moving parts and is maintenance free.

Technical specifications of the VEGAKON 66

Parameter Specification
Manufacturer / part number VEGA / VEGAKON 66
Application Conductive liquids
Version Compact level switch, rod, partly insulated; two or three rod electrodes
Insulation PP
Rod length 0.12 … 4 m
Process fitting Thread G1½
Process temperature -40 … +100 °C
Process pressure -1 … 6 bar
Wetted materials PP, 316Ti (1.4571), Alloy C22 (2.4602)
Outputs Relay (DPDT), transistor (NPN/PNP)
Housing Plastic (IP66/IP67) or plastic-coated aluminium (IP66)
Ambient temperature -40 … +70 °C

How the VEGAKON 66 compares with VEGAKON 61 and the EL probes

The VEGAKON 61 is a front-flush conical switch (thread G1, cone or Tuchenhagen fitting, up to 150 °C and 25 bar) made for pipelines and dry-run protection with buildup resistance. The VEGAKON 66 is the rod version for tanks and sumps. The EL 1, EL 3, EL 4, EL 6 and EL 8 are separate probes without electronics, which are connected to a VEGATOR controller and allow up to five switching points on one sensor. The VEGAKON 66 includes its own electronics, so it needs no controller, but it offers only the two or three rods of its design.

In the manufacturer’s selection table the VEGAKON 66 is recommended for power generation, environment and recycling, and water; it is rated as possible with limitations for chemical and petrochemical use and is not recommended for sticky buildup-prone products. Steam and condensation, changing density and pressure up to 6 bar are suitable.

Selection checklist for the VEGAKON 66

  • The liquid must be conductive: water, aqueous solutions, waste water.
  • Limits are 100 °C and 6 bar; for higher temperature or pressure consider the VEGAKON 61 or an EL probe with a VEGATOR.
  • Rod length from 0.12 to 4 m, set by where the switching point should be; rods can be shortened individually.
  • Mounting: thread G1½ from above. Lateral mounting is possible at an incline of about 20 degrees so liquid drains from the insulation.
  • Output: relay or transistor for PLC binary inputs, NPN or PNP.
  • Housing: plastic or plastic-coated aluminium.

Installation and commissioning

Mount the probe so the rods never touch the vessel wall, and keep the instrument out of the filling stream, where splashing can trigger false signals. With agitators or vibration, keep the rods short or add an insulated support. In a metal vessel, connect the probe to the vessel in a way that is electrically conductive, using conductive seals rather than PTFE tape on the thread; in a plastic tank use the ground electrode. The supply data are found in the technical data of the type; round cable of 5 to 9 mm outer diameter ensures the gland seals. Wire it so that the circuit is open on a level signal, cable break or failure. Test by raising and lowering the level before handing over.

Control functions for the VEGAKON 66

The manufacturer describes three common duties for conductive switches. The first is overflow protection, where a probe at the maximum level shuts the inflow. The second is two-point control, such as emptying a sump automatically when a high level is reached and stopping the pump at a minimum level; pump control is called a frequent task in water and waste water. The third is dry-run protection of a pump or pipeline. A single VEGAKON 66 provides one switching point, so a two-point pump duty uses two instruments at different heights, or an EL probe set with several rods on a VEGATOR controller when more points are needed.

Typical applications in Oman and the GCC

Pump sumps, cooling water basins, condensate collection tanks, water treatment tanks and waste water pits are all conductive-liquid duties that suit the VEGAKON 66. In a Gulf climate the key aspects are high ambient temperature (the housing rating is up to 70 °C ambient) and sand or dust, so choose the housing and cable gland accordingly. The unit is not suited to hydrocarbons, which are non-conductive; use a capacitive or vibrating switch there.

Information to send with an RFQ for the VEGAKON 66

  • Liquid and approximate conductivity.
  • Temperature and pressure.
  • Rod length, number of rods and mounting position.
  • Output type and supply voltage.
  • Housing preference and quantity.

Documents and quotation

A product information datasheet covering the VEGAKON 61, VEGAKON 66 and the EL probes is attached on this page. Send the type code or the details above, and we will confirm availability and quote the VEGAKON 66 in Oman and the GCC.

Datasheets & Documents
  • PDF Datasheet VEGA VEGAKON 66 Datasheet Download
Reviews (0)

Reviews

There are no reviews yet.

How would you rate this product?

It takes about 10 seconds — just tap a star. Your email is never published.

About brand

VEGA is a German maker of level and pressure instruments. Bruno Grieshaber founded the company in 1959 in Triberg in the Black Forest, and it has been based in Schiltach since 1975, still family owned as VEGA Grieshaber KG. VEGA is best known for radar level sensors: it introduced the first two-wire radar level sensor in 1997 and the first 80 GHz radar sensor for bulk solids, the VEGAPULS 69, in 2015.

Seven Star LLC is an independent supplier listing VEGA radar and guided wave radar transmitters, point level switches, pressure transmitters and signal conditioning instruments for buyers in Oman and the GCC. Sensors are matched from the product code on the type label.

VEGA at a glance

Origin Founded by Bruno Grieshaber in 1959 in Triberg, Germany
Headquarters Schiltach, Black Forest, Germany (since 1975)
Ownership Family-owned company: VEGA Grieshaber KG
Milestones First two-wire radar level sensor (1997), first 80 GHz radar for bulk solids, VEGAPULS 69 (2015), VEGAPULS 6X single radar platform for liquids and solids
Product families VEGAPULS radar, VEGAFLEX guided wave radar, VEGASWING and VEGAPOINT switches, VEGACAL capacitive probes, VEGABAR and VEGADIF pressure, VEGAMET and VEGADIS signal conditioning

VEGA sensor and instrument series

Series Type Typical use
VEGAPULS 6X, VEGAPULS 69, VEGAPULS 64 Process radar level transmitters (80 GHz) Storage and process tanks, reactors with agitators, silos and bulk solids
VEGAPULS 11, 21, 31, 42 Compact radar sensors Water and wastewater, simple storage tanks; VEGAPULS 42 with IO-Link for machine integration
VEGAPULS C 21, C 11, C 22, C 23 Radar sensors with fixed cable, IP68 Wet wells, pumping stations, open channels and river levels
VEGAFLEX 81, 82, 83, 86 Guided wave radar (TDR) Level and interface in liquids, bulk solids, hygienic and high-temperature or high-pressure service (VEGAFLEX 86)
VEGASWING 61, 63, VEGAPOINT 21 Vibrating and capacitive point level switches Overfill protection, dry-run protection and high or low level alarms
VEGACAL 62 to VEGACAL 67 Capacitive rod and cable probes Point and continuous level in solids and conductive or adhesive liquids
VEGABAR 82, 83, 28, 29, 38 Pressure transmitters, ceramic or metallic cell Process pressure and hydrostatic level; compact 18/19 and 28/29/38 versions for utilities
VEGADIF 85 Differential pressure transmitter DP flow, filter monitoring and level in pressurised vessels
VEGAMET 841, VEGADIS 176 Controller and loop display Level display, pump control and remote indication of 4-20 mA signals

Where VEGA instruments are used

VEGA radar sensors measure level in crude oil and product tanks, separators, chemical reactors, cement and aggregate silos, grain stores and water reservoirs. Compact cable radars are widely used in wastewater pumping stations and flood monitoring. Because 80 GHz radar focuses a narrow beam, it can measure past internal structures in a tank, and it is not affected by the temperature, pressure or vapour above the product, which suits hot Gulf storage tanks.

Ordering VEGA instruments: what we need

The product code on the type label (for example PS64.XXXXXXX) fixes the measuring range, antenna or probe, process connection, electronics and approvals. Send it with the serial number. For a new measurement add the medium and its dielectric constant if known, tank or silo height and internals, process pressure and temperature, process connection, output (4-20 mA HART, PROFIBUS PA, Modbus or IO-Link), and any hazardous-area or overfill protection approval required.

Facts checked against VEGA company and product information, October 2026.

FAQ

Questions about the VEGA VEGAKON 66 Conductive Multi-Rod Level Switch

Answers from our engineering team on installation, compatibility and integration.

01What liquids can the VEGAKON 66 detect?
Conductive liquids such as water and aqueous solutions. It is not suitable for non-conductive hydrocarbons.
02What are the temperature and pressure limits?
Process temperature is -40 to +100 degrees C and process pressure is -1 to 6 bar.
03What is the rod length range?
From 0.12 to 4 m, and the rods can be shortened individually to set the switching point.
04Which outputs are offered?
A relay (DPDT) or a transistor output with NPN or PNP action.
05How does it differ from the VEGAKON 61?
The VEGAKON 61 is a front-flush cone switch for pipelines, while the VEGAKON 66 is a rod type for tanks and sumps.