- Automation & ControlView all 2,859 products
- Automation Accessories
- AC Drives
- PLC & I/O Cards
- Industrial Communications
- Vibration Monitoring
- Controllers & Data Acquisition
- Isolator & Barrier
- Safety Switches & Guard Locking
- Motor Soft Starters
- CCTV & Security
- Encoders
- Pneumatic Cylinders
- HMI Displays
- Servo Drives
- Industrial Computers
- Machine Vision
- Automation Software
- Robotics
Brand: Masoneilan
Masoneilan 535V Series Microflow Pressure Regulator
Description
Overview
The Masoneilan 535V Series is the microflow member of the Baker Hughes Masoneilan 500 Series regulators. It is built for very small flow rates that a conventional regulator cannot control well: Model 535V reduces downstream pressure of air, liquids, saturated steam and superheated steam, and Model 535V-50 maintains a differential pressure. The Masoneilan 535V Series uses a standard 28000 Series body with an integral bonnet in 1/2, 3/4 and 1 inch sizes (15, 20 and 25 mm), as listed in the body rating, flow coefficient, dimension and weight tables, and it is operated by the 10900 Series spring-diaphragm actuator. Ten different plug and seat ring assemblies provide rated Cv values from 0.004 to 3.8, a range that reaches well below the smallest trim in the larger 535H family.
In Oman and the GCC, Seven Star LLC proudly supplies the Masoneilan 535V Series to laboratories, packaged-skid builders and process plants in the Sultanate of Oman and across the GCC. We help engineers in Muscat convert a small-flow duty into the correct trim number and spring range, and provide genuine Masoneilan documentation and regional support with each regulator.
Operating Principle of the Masoneilan 535V Series
The Masoneilan 535V Series is a direct-operated regulator, so the controlled pressure itself moves the plug. The adjustable spring of the actuator is set to the desired pressure and holds the plug open; when the controlled pressure rises above the set point, it acts on the diaphragm and closes the plug, and variations in pressure produce the movement needed to restore the set point. The controlled pressure is piped from a convenient point 1.8 to 3 m (6 to 10 ft) from the regulator, or from the discharge line near the pump on pump applications, to the 1/2 inch NPT connection in the diaphragm case.
The 535V-50 differential version of the Masoneilan 535V Series holds one pressure above a reference pressure by an adjustable amount. Here the actuator spring holds the regulator open, and an increase in the differential above the set point closes it. The manual stresses that pressure must be raised on both sides of the diaphragm at the same time to avoid diaphragm failure, and recommends a needle valve and gauge in each control line, placed close enough together that both can be handled simultaneously. In the 535V these needle valves also act as adjustable chokes against cycling caused by pump pulsation.
Engineering Design of the Masoneilan 535V Series
The distinctive part of the Masoneilan 535V Series is its trim. Eight plugs and five seat rings combine into ten trims, numbered 0 to 9, with orifice diameters of 14.3, 9.55, 4.47, 1.63 and 2.03 mm. The four plugs for trims 6 to 9 differ only by the angle of the flat machined on the tip, sharing the same seat ring and spacer, which is how very fine Cv values are reached. For trims below Cv 0.10 the seat ring is a two-part assembly with a spacer. Travel is 2.54 mm (0.1 inch) on a 7.925 mm (5/16 inch) stem, the characteristic is linear and shutoff is metal seat Class IV. The finest trims use Stellite No. 6 seat rings and solid Stellite No. 12 plugs, which resist wear at very small orifices.
The body of the Masoneilan 535V Series is the standard 28000 Series design with an integral bonnet, except for the 102 mm flanged body. Ratings are ANSI Class 150, 300 and 600 flanged, NPT screwed and flangeless, with body materials of 316 steel and stainless steel. A packing quick-change method lets the whole actuator be removed without disturbing calibration on trims of Cv 0.6 to 3.8, although the manual advises against it for finer plugs. As on the other 500 Series regulators, hot services require the actuator to be mounted below the body centreline with a condensate barrier to protect the diaphragm.
Key Features
The following characteristics make the Masoneilan 535V Series the right choice for very small flows:
- Ten trims with rated Cv from 0.004 to 3.8 allow stable control of extremely small flows.
- The standard 28000 Series body gives compact, familiar dimensions and a range of end connections.
- A linear characteristic gives proportional flow change with plug travel.
- Direct-operated spring-diaphragm action needs no positioner, air supply or electrical power.
- The -50 differential version maintains one pressure above another by an adjustable amount.
- Flanged ANSI Class 150 to 600, screwed NPT and flangeless bodies cover most piping standards.
- Seat rings and plugs can be replaced in the field, and recommended spare parts are listed in the manual.
- The manual gives an estimated useful life of 25 years or more with annual inspection and routine maintenance.
Industrial Applications
The Masoneilan 535V Series belongs wherever a small amount of fluid must be held at a precise pressure: pilot and sample lines, analyser and laboratory supplies, chemical injection and dosing skids, small steam users and tracing, and purge or blanketing gas to instruments. In Oman such duties are common in oil and gas facilities, gas processing, pharmaceutical and food plants, desalination and power plants in Muscat, Sohar and Salalah, where the main process lines are large but the supporting lines are very small.
In Oman and the GCC, Seven Star LLC supplies the Masoneilan 535V Series with its related products, including the Masoneilan 28000 Series Varipak valve that shares its body design, the Masoneilan 28000 Series seal and O-ring kit and the Masoneilan 172 Series regulator for larger direct-operated duties. Our team can help decide between them.
Technical Specifications
The table below summarises the main data of the Masoneilan 535V Series from the Baker Hughes technical specification and manual. Dimensions, weights and actuator limits are in the official datasheet.
| Parameter | Specification |
|---|---|
| Model | Masoneilan 535V (pressure reducing, microflow) and 535V-50 (differential pressure) |
| Service | Air, steam, gas, liquids |
| Sizes | 1/2, 3/4 and 1 inch (15, 20, 25 mm) per the data tables; the foreword names only 3/4 and 1 inch |
| Body | Standard 28000 Series with integral bonnet, flow to open, single seat |
| Ratings and ends | ANSI Class 150, 300, 600 flanged; NPT screwed; flangeless |
| Body material | 316 steel, stainless steel |
| Trim | Ten trims (0 to 9); Stellite No. 6 seat ring and Stellite No. 12 plug on trims 6 to 9 |
| Rated Cv | 0.004 to 3.8 (3.8 on the 1 inch body only; 2.3 is the highest on 1/2 and 3/4 inch) |
| Characteristic | Linear |
| Travel and stem | 2.54 mm (0.1 inch); 7.925 mm (5/16 inch) |
| Seat leakage | Metal seat, Class IV |
| Actuator | 10900 Series spring-diaphragm |
Face-to-face dimension and body weight
| Body style | Face to face (mm) | Body sub-assembly weight (kg) |
|---|---|---|
| Flanged, ANSI Class 150, 300 and 600 RF | 160 | 7.5 to 9.5 |
| Threaded NPT | 102 | 5 |
| Flangeless | 102 | 5 |
Rated Cv by body size and trim number
| Trim number | 0 | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 |
|---|---|---|---|---|---|---|---|---|---|---|
| 1 inch (25 mm) | 3.8 | 2.3 | 1.2 | 0.6 | 0.25 | 0.1 | 0.05 | 0.025 | 0.01 | 0.004 |
| 1/2 and 3/4 inch (15, 20 mm) | – | 2.3 | 1.2 | 0.6 | 0.25 | 0.1 | 0.05 | 0.025 | 0.01 | 0.004 |
The foreword of the Baker Hughes specification names only the 3/4 and 1 inch bodies for the 535V, while the body rating, flow coefficient, dimension and weight tables all include the 1/2 inch size. Seven Star LLC follows the tables, so the Masoneilan 535V Series datasheet data above applies to 1/2, 3/4 and 1 inch bodies. For differential duty see the 535V-50 page, and for back pressure duty see the 536V page, which has its own instruction manual and actuator ranges.
Companion pages for this microflow family are the Masoneilan 535V-50 differential microflow regulator and Masoneilan 536V back pressure microflow regulator.
Related Masoneilan pressure regulators include the Masoneilan 535H-536H Series single-seat regulator, Masoneilan 525-526 Series double-seated regulator and Masoneilan 173 Series back pressure regulator.
Request a Quote for Masoneilan 535V Series
To request pricing or technical support for the Masoneilan 535V Series, send a formal RFQ to the Seven Star LLC instrumentation division with your fluid, set pressure, inlet pressure and required flow in Cv or flow units. We confirm trim and spring range, advise on regional warehouse availability and supply the Baker Hughes technical datasheet from this page. In Oman and the GCC, Seven Star LLC delivers genuine products with manufacturer documentation and local support.
See also: Masoneilan 78 Air Filter Regulator (Models 78-4 and 78-40).
Datasheets & Documents
Reviews (0)
How would you rate this product? Cancel reply
About brand
Masoneilan is a control valve brand of Baker Hughes with roots going back to 1882. Its Camflex eccentric plug rotary valve, 21000 series globe valve and SVI digital positioners are fixtures in refineries, gas plants and power stations. Every valve carries a serial number and a long model number that define the actuator, body and trim.
Seven Star LLC is an independent supplier listing Masoneilan control valves, actuators, regulators, positioners and level instruments for buyers in Oman and the GCC. We source complete valves as well as Masoneilan spare parts against that nameplate data.
Masoneilan at a glance
| Origin | Mason Regulator Company, Boston area, USA (1882). It acquired the Neilan Company of California in 1931, and the two names became Masoneilan. |
|---|---|
| Ownership | Dresser Industries from 1985, then GE Oil & Gas, now Baker Hughes |
| Milestones the company cites | Cv flow coefficient introduced (1944), spring-diaphragm actuators (1955), Camflex rotary globe valve (1968), Lo-dB low-noise trim (1975), LincolnLog axial-flow letdown valve (1982), Varipak (1984), V-Log (1998), SteamForm steam conditioning valve (2002) |
| Product families | Globe, rotary, butterfly and severe-service control valves, actuators, digital positioners, self-operated regulators and displacer level instruments |
| Typical duty | Throttling control of steam, gas, hydrocarbons and water, high-pressure letdown, anti-cavitation and low-noise service |
Masoneilan control valves and actuator series
| Series | Type | Typical use |
|---|---|---|
| 21000, 21009 | Top-guided and cage-guided globe valves | General process control. Cryogenic (21000 C), bellows seal (21000 BS) and API 6A versions are also made |
| 41005 | Cage-guided globe valve | Higher pressure drop and larger sizes, up to 30-36 inch extended sizes; VRT anti-cavitation and API 6A versions |
| 35002 Camflex II | Eccentric plug rotary control valve | Erosive, flashing and dirty service; HC high capacity, DVD low noise and GR globe replacement versions |
| 37002 MiniTork II, 39003/39005, 33000 | Butterfly control valves, high-performance and triple-offset | Large flows at low pressure drop, and tight-shutoff duty |
| 28000 Varipak | Microflow control valve | Very small flows, with adjustable Cv |
| 78400/18400 LincolnLog, 77000, 49000 V-Log | Severe-service multi-stage valves | High-pressure liquid letdown, anti-cavitation and gas noise reduction |
| 84000/84003 SteamForm, DSH | Steam conditioning valves and desuperheaters | Turbine bypass and steam pressure and temperature reduction |
| 87/88, 37/38, 51/52/53 | Spring-diaphragm and piston actuators | Linear and rotary valve actuation; diaphragms and soft-goods kits are listed separately |
| SVI3, SVI II AP, SVi1000, SVI FF | Digital valve positioners | HART or FOUNDATION Fieldbus positioning with valve diagnostics; the SVI II ESD adds partial stroke testing |
| 4700/4800, 8013 | Pneumatic and electro-pneumatic positioners | Older installed base. Many sites move to SVI positioners at overhaul |
| 525/526, 535/536, 171-174 | Self-operated pressure regulators | Pressure reducing and back-pressure control without external power |
| 12400, 12800 | Displacer level transmitters and controllers | Digital (12400, HART, SIL 2 version 12420) and pneumatic (12800) level control on separators and vessels |
Where Masoneilan valves are used
Throttling duty on steam, hydrocarbons, gas and water is the daily work of these valves. Typical services are feedwater and steam conditioning in power plants, separator and compressor loops in gas processing, high-pressure-drop letdown, cryogenic service in LNG and air separation, and general flow, pressure and level control in refineries and chemical plants.
Ordering Masoneilan valves and spare parts: what we need
For spare parts the serial number decides the order, because the factory record behind it lists the trim, materials and actuator. Send a clear nameplate photo with the serial number, model number, size and pressure class. For a new valve, add the process data: fluid, inlet and outlet pressure, temperature, minimum, normal and maximum flow, required leakage class, fail position, air supply and control signal. When an older positioner or valve series is no longer made, we quote the successor that Baker Hughes names and list the mounting kit it needs.
Frequently requested Masoneilan models: Masoneilan 4700E/4800E Electropneumatic Valve Positioner, Masoneilan 28000 Series VariPak Valve Seal & O-Ring Kit, Masoneilan 535H Single-Seat Pressure Reducing Regulator.
Facts checked against Baker Hughes Masoneilan product information and the company's published timeline, October 2026.
Browse Masoneilan products by category: Control Valves, Valve Actuator, Regulators, Valve Positioner, Level Transmitter.
FAQ
Questions about the Masoneilan 535V Series Microflow Pressure Regulator
Answers from our engineering team on installation, compatibility and integration.
01What flow range does the Masoneilan 535V Series cover?
It is a microflow regulator with ten trims and rated Cv values from 0.004 to 3.8, designed for small-to-moderate microflow applications that larger regulators cannot control accurately.
02What is the difference between the 535V and the 535V-50?
The 535V reduces and holds a downstream pressure, while the 535V-50 maintains one pressure above a reference pressure by an adjustable amount. Both use the same single-seat body and the 10900 Series actuator.
03What sizes and connections are available?
Body sizes are 1/2, 3/4 and 1 inch (15, 20 and 25 mm), as listed in the body rating, flow coefficient, dimension and weight tables; the specification foreword names only 3/4 and 1 inch, so the tables are treated as governing. The standard 28000 Series body is offered with ANSI Class 150, 300 and 600 flanged ends, NPT screwed ends and flangeless construction.
04Can it be used on high-temperature steam?
Yes, with precautions. For temperatures above the diaphragm material rating the regulator must be mounted with the actuator below the body centreline and a condensate barrier in the sensing line and diaphragm case.
05Is Seven Star LLC a trusted supplier for Masoneilan products?
Yes. Seven Star LLC supplies genuine Masoneilan products across Oman and the GCC, supplying genuine Masoneilan regulators with manufacturer documentation and technical support from Muscat.


















Reviews
There are no reviews yet.