- Automation & ControlView all 2,483 products
- Automation Accessories
- AC Drives
- PLC & I/O Cards
- Industrial Communications
- Vibration Monitoring
- Controllers & Data Acquisition
- Isolator & Barrier
- CCTV & Security
- Encoders
- Motor Soft Starters
- Safety Switches & Guard Locking
- HMI Displays
- Pneumatic Cylinders
- Servo Drives
- Industrial Computers
- Machine Vision
- Automation Software
- Robotics
Brand: Festo
Festo MS6-LFR-1/2-D6-C-R-V-A4-AS Filter Regulator
Description
MS6-LFR-1/2-D6-C-R-V-A4-AS: MS6 filter regulator with 5 µm filtration
The Festo MS6-LFR-1/2-D6-C-R-V-A4-AS (article 579069) is a compressed-air filter regulator of the MS series, size 6, with G1/2 ports. It cleans the air, drains condensate and holds a set outlet pressure in a single housing. Seven Star LLC supplies MS6-LFR-1/2-D6-C-R-V-A4-AS in Oman and the GCC as an independent supplier in Muscat, not affiliated with the manufacturer. The notes below turn the manufacturer data sheet into practical selection advice.
How to read the part number against the datasheet:
- MS6 is the series and size shown on the datasheet (series MS, size 6).
- LFR stands for filter regulator, meaning the filter and the pressure regulator share one housing.
- 1/2 in the code matches the G1/2 port thread listed for both ports.
- The remaining letters select options such as regulation range, filter element, drain, gauge and housing. In the datasheets reviewed for this page, codes containing C show a 5 µm element and codes containing E show 40 µm; always confirm the actual values against the sheet for article 579069.
- This version: filter grade 5 µm, condensate drain fully automatic; manual, non-detenting, no gauge is fitted and the gauge port is prepared for G1/4.
MS6-LFR-1/2-D6-C-R-V-A4-AS technical specifications
Values in the table are taken from the manufacturer data sheet for article 579069.
| Parameter | Specification |
|---|---|
| Manufacturer / part number | Festo / MS6-LFR-1/2-D6-C-R-V-A4-AS |
| Article number | 579069 |
| Size | 6 |
| Series | MS |
| Actuator lock | Rotary knob with detent; can be closed with accessories |
| Mounting position | Vertical ±5° |
| Filter grade | 5 µm |
| Condensate drain | Fully automatic; Manual, non-detenting |
| Max. condensate volume | 38 ml |
| Controller function | Output pressure constant; With secondary exhausting |
| Bowl guard | Plastic bowl guard |
| Degree of condensate separation | 75 % |
| Pressure gauge (ANALOG) or Pressure display (DIGITAL) | Prepared for G1/4 |
| Operating pressure | 0.2 MPa to 1.2 MPa; 2 bar to 12 bar |
| Pressure regulation range | 0.3 bar to 7 bar |
| Max. pressure hysteresis | 0.025 MPa; 0.25 bar; 3.625 psi |
| Standard nominal flow rate (standardised to DIN 1343) | 5600 l/min |
| Operating medium | Compressed air to ISO 8573-1:2010 [7:4:-]; Inert gas |
| Corrosion resistance class CRC | 2 – Moderate corrosion stress |
| LABS (PWIS) conformity | VDMA24364-B1/B2-L |
| Storage temperature | -10 °C to 60 °C |
| Suitable for use with food | See supplementary material information |
| Air purity class at output | Compressed air to ISO 8573-1:2010 [6:4:4] |
| Media temperature | -10 °C to 60 °C |
| Ambient temperature | -10 °C to 60 °C |
| Pore size | 5 µm |
| Product weight | 875 g |
| Type of mounting | Front panel mounting; Inline installation; With accessories |
| Pneumatic connection, port 1 | G1/2 |
| Pneumatic connection, port 2 | G1/2 |
| Material control panel | PA; POM |
| Material seals | NBR |
| Material housing | Die-cast aluminium |
| Material membrane | NBR |
| Material bowl | Makrolon® |
How the MS6-LFR-1/2-D6-C-R-V-A4-AS filters and regulates compressed air
Incoming air is made to swirl inside the filter section, so water droplets and coarse particles are thrown to the wall and fall into the bowl, while the 5 µm element holds back finer solids. The datasheet states a degree of condensate separation of 75 %. The collected condensate leaves through the fully automatic; manual, non-detenting drain.
Downstream, a regulator holds the outlet pressure steady at the set value inside the range 0.3 bar to 7 bar. The datasheet lists the controller function as: output pressure constant; with secondary exhausting. A maximum pressure hysteresis of 0.25 bar describes how far the outlet can differ between rising and falling adjustment, so set pressure by approaching the target from below.
The nominal flow of 5600 l/min is the standardised value. Under higher demand the outlet pressure sags, which matters for fast cylinders and blow-off. The air purity class at the output is Compressed air to ISO 8573-1:2010 [6:4:4], with the unit weighing 875 g in a die-cast aluminium housing and Makrolon® bowl.
Where MS6-LFR-1/2-D6-C-R-V-A4-AS fits: compatible and related parts
The MS modular air-preparation range lets a filter regulator stand alone at a machine inlet or be combined with shut-off valves, soft-start valves, lubricators and distribution blocks from the same series. Mounting options listed on the sheet: front panel mounting; inline installation; with accessories.
Related units we handle in the same series include MS6-LFR-1/2-D7-C-R-M-A4-AS, MS6-LFR-1/2-D6-C-P-M-A8-B, MS6-LFR-1/2-D6-E-P-M-AG-BAR-B, MS6-LFR-1/2-D6-C-P-M-A8-F1A-B, MS4-LFR-1/4-D6-E-P-M-A8-B, MS4-LFR-1/4-D6-E-P-M-AG-BAR-B. They differ in filter element, drain, ports, regulation range and housing, so a replacement must match all of these rather than just the family name.
Selection and ordering checklist for MS6-LFR-1/2-D6-C-R-V-A4-AS
- Filter grade 5 µm: use the fine 5 µm element only when the downstream equipment tolerates it.
- Condensate drain: fully automatic; manual, non-detenting, with a bowl capacity of 38 ml.
- Pressure: operating 2 bar to 12 bar and regulation 0.3 bar to 7 bar; confirm both against the machine.
- Flow: 5600 l/min nominal, to be compared with peak consumption of the branch.
- Thread: G1/2 on both ports, so check G against NPT before ordering.
- Regulation is 0.3 to 7 bar while the operating pressure is 2 to 12 bar, so the minimum supply is higher than for manual-drain siblings. The gauge port is prepared for G1/4 and the gauge is not part of the unit.
Installation, commissioning and maintenance of MS6-LFR-1/2-D6-C-R-V-A4-AS
Install the unit upright (Vertical ±5°) with the bowl downwards and the flow arrow matching the air direction, close to the equipment it protects and downstream of the main air treatment. Leave room beneath the bowl to reach the drain.
At start-up open the supply slowly, then raise the outlet pressure from below to the target. The datasheet lists the actuator lock as: rotary knob with detent; can be closed with accessories. Check the bowl periodically for oil or water, replace the element on a schedule or when pressure drop grows, and keep spare seals and elements for planned stops.
Typical applications of MS6-LFR-1/2-D6-C-R-V-A4-AS in Oman and the GCC
Oman and the wider GCC put pneumatic and sensing equipment under demanding conditions: summer ambient heat, fine desert dust, high humidity in coastal plants and compressed-air systems that are not always perfectly dried. A size-6 unit with G1/2 ports and 5600 l/min nominal flow is the heavy-duty option of this selection, used as a main branch supply to groups of machines, large cylinder banks and pneumatic conveying or sorting lines, with automatic drainage so the bowl never fills unseen.
The datasheet lists a corrosion resistance class of 2 – Moderate corrosion stress and media and ambient temperature of -10 °C to 60 °C. In coastal plants with salt-laden air or dusty inland sites, this should be weighed against the housing material, die-cast aluminium, when choosing the mounting location.
MS6-LFR-1/2-D6-C-R-V-A4-AS compared with related filter regulators
Key data from the manufacturer sheets of this unit and its closest siblings.
| Part number | Filter grade | Drain | Ports | Flow (normal) | Regulation range |
|---|---|---|---|---|---|
| MS6-LFR-1/2-D6-C-R-V-A4-AS | 5 µm | Fully automatic | G1/2 | 5600 l/min | 0.3 bar to 7 bar |
| MS6-LFR-1/2-D7-C-R-M-A4-AS | 5 µm | Manual, rotating | G1/2 | 4000 l/min | 0.5 bar to 12 bar |
| MS6-LFR-1/2-D6-C-P-M-A8-B | 5 µm | Manual, rotating | G1/2 | 4750 l/min | 0.3 bar to 7 bar |
| MS6-LFR-1/2-D6-E-P-M-AG-BAR-B | 40 µm | Manual, rotating | G1/2 | 5300 l/min | 0.3 bar to 7 bar |
| MS6-LFR-1/2-D6-C-P-M-A8-F1A-B | 5 µm | Manual, rotating | G1/2 | 4750 l/min | 0.3 bar to 7 bar |
Information to send with your MS6-LFR-1/2-D6-C-R-V-A4-AS RFQ
- Full part number MS6-LFR-1/2-D6-C-R-V-A4-AS and the quantity required.
- Pipe thread standard (G or NPT) and size on your system.
- Supply pressure range, required outlet pressure and peak flow.
- Whether you need a gauge, mounting bracket or other MS-series accessories.
- Air quality at the site (dryness, oil carry-over, dust).
- Delivery location in Oman or the GCC.
Documents and quotation
The manufacturer data sheet for MS6-LFR-1/2-D6-C-R-V-A4-AS is attached on this page for download.
Send the part number MS6-LFR-1/2-D6-C-R-V-A4-AS with quantity and delivery location and we will confirm availability and a quotation. Seven Star LLC is an independent supplier and is not affiliated with the manufacturer.
Other Models in the Festo Ms Filter Regulator Range
Seven Star LLC supplies models from the Festo Ms Filter Regulator range in Oman and the GCC. Compare the related models below and request a quote for the one that matches your application.
| Model | Category | |
|---|---|---|
| Festo MS4-LFR-1/4-D6-E-P-M-A8-B Filter Regulator | Regulators | View details |
| Festo MS4-LFR-1/4-D6-E-P-M-AG-BAR-B Filter Regulator | Regulators | View details |
| Festo MS4-LFR-1/4-D6-C-P-VC-A8-B Filter Regulator | Regulators | View details |
| Festo MS4-LFR-1/4-D6-E-R-M-MPA Filter Regulator | Regulators | View details |
| Festo MS4-LFR-1/4-D7-CRV-AS-Z Filter Regulator | Regulators | View details |
| Festo MS4-LFR-1/8-D7-C-R-M-PAGN-AS-WR Filter Regulator | Regulators | View details |
| Festo MS6-LFR-1/2-D6-C-R-V-A4-AS Filter Regulator | Regulators | You are viewing this model |
| Festo MS6-LFR-1/2-D7-C-R-M-A4-AS Filter Regulator | Regulators | View details |
| Festo MS6-LFR-1/2-D6-C-P-M-A8-B Filter Regulator | Regulators | View details |
| Festo MS6-LFR-1/2-D6-E-P-M-AG-BAR-B Filter Regulator | Regulators | View details |
| Festo MS6-LFR-1/2-D6-C-P-M-A8-F1A-B Filter Regulator | Regulators | View details |
| Festo MS6-LFR-3/8-D6-ERM-E11 Filter Regulator | Regulators | View details |
Datasheets & Documents
- Datasheet Festo MS6-LFR-1/2-D6-C-R-V-A4-AS Datasheet Download
Reviews (0)
How would you rate this product? Cancel reply
About brand
Festo is a German maker of pneumatic and electric automation technology, founded in 1925 in Esslingen am Neckar by Albert Fezer and Gottlieb Stoll; the name comes from their surnames. It first made woodworking machines and power tools before moving into pneumatics in the 1950s. Festo is family-owned and still headquartered in Esslingen.
Seven Star LLC sources and supplies Festo cylinders, valves and valve terminals for machine maintenance and projects in Oman and the GCC.
Festo company profile
| Founded | 1925, Esslingen am Neckar, Germany |
|---|---|
| Founders | Albert Fezer and Gottlieb Stoll |
| Name | From FEzer and STOll |
| Headquarters | Esslingen am Neckar |
| Ownership | Family-owned |
| Product families | DSBC and ADN pneumatic cylinders, VUVG and VTUG solenoid valves and valve terminals, MS series air preparation units, CPX-AP remote I/O, EMMT servo motors and CMMT servo drives, electric axes and grippers |
Milestones
- 1925: Fezer and Stoll found the company in Esslingen.
- 1950s: Festo begins making pneumatic components.
Festo products listed
Two items show the two halves of a pneumatic circuit. The VTUG is a valve terminal: a manifold that carries a row of directional valves with common air supply and a shared electrical connection. The DSBC-32-100-PPVA-N3 is an ISO standard cylinder. Its type code reads as 32 mm piston diameter and 100 mm stroke, with adjustable end-position cushioning and a piston magnet for position sensing.
Festo products we list
Ordering Festo parts: what we need
Festo parts carry both a type code and a numeric part number on the label. Send both when you can; the part number is the shortest route to an exact match. For a cylinder give the full type code as on the listed DSBC example, plus mounting parts and proximity switches if required. For a VTUG valve terminal send the configuration code or a label photo: number of valve positions, valve functions, coil voltage and the electrical connection type all vary from one terminal to the next.
Facts checked against Festo's corporate history pages, October 2026.
Browse Festo products by category: Solenoid Valve, Valve Actuator.
FAQ
Questions about the Festo MS6-LFR-1/2-D6-C-R-V-A4-AS Filter Regulator
Answers from our engineering team on installation, compatibility and integration.
01What filter grade does the MS6-LFR-1/2-D6-C-R-V-A4-AS have?
The datasheet lists a filter grade of 5 µm with fully automatic; manual, non-detenting condensate drainage and a bowl capacity of 38 ml.
02What pressure range does the MS6-LFR-1/2-D6-C-R-V-A4-AS regulate?
The regulation range is 0.3 bar to 7 bar and the operating pressure is 2 bar to 12 bar, according to the data sheet for article 579069.
03What flow rate does the MS6-LFR-1/2-D6-C-R-V-A4-AS support?
The standard nominal flow rate on the datasheet is 5600 l/min, standardised to DIN 1343. Demand above that causes the outlet pressure to droop.
04What port size does the MS6-LFR-1/2-D6-C-R-V-A4-AS use?
Both ports are G1/2. G and NPT threads are not interchangeable, so match the thread to your pipework.
05How is the MS6-LFR-1/2-D6-C-R-V-A4-AS mounted?
It is installed upright, within a tolerance of five degrees, bowl down. The sheet lists in-line installation or front panel mounting, with accessories for the latter.


















Reviews
There are no reviews yet.