Cooper Crouse-Hinds N2PS1111 N2S Explosionproof Pushbutton Station

Name: Cooper Crouse-Hinds N2PS1111 Pushbutton | Seven Star LLC
Brand: Cooper Crouse-Hinds

Description

Overview

The Cooper Crouse-Hinds N2PS1111 is a non-metallic explosionproof pushbutton station from the N2S series, built around a corrosion-resistant Krydon fiberglass-reinforced polyester enclosure engineered for demanding Class I, Division 2 hazardous locations. The N2PS1111 provides a single momentary contact circuit with 1NO-1NC configuration rated to 600 VAC, giving plant electricians and control system integrators a compact, lightweight remote pushbutton for starting and stopping motors, actuating solenoids, or triggering interlocks in classified process areas without the added weight and cost of a metallic enclosure.

As the official authorized partner and exclusive regional representative for Cooper Crouse-Hinds, Seven Star LLC proudly supplies the N2PS1111 pushbutton station to oil and gas, petrochemical, and water treatment operators across Oman and the wider GCC. Every unit is genuine Crouse-Hinds product with full manufacturer traceability, and our technical team supports specification, sizing, and compliant installation for hazardous-area control station networks throughout the Sultanate of Oman.

Operating Principle

The Cooper Crouse-Hinds N2PS1111 uses a factory-sealed momentary contact mechanism housed entirely within the Krydon polyester body, eliminating the need for external conduit seals at the device itself – a key advantage over metallic pushbutton stations in wet, corrosive, or space-constrained installations. Depressing the button closes the normally-open (NO) contact and opens the normally-closed (NC) contact simultaneously, sending a momentary signal to the associated magnetic starter, contactor, or PLC input; releasing the button returns both contacts to their normal state.

For the Cooper Crouse-Hinds N2PS1111, because the enclosure and internal contact block are factory sealed as a single assembly, the N2PS1111 requires no field-poured sealing compound and no moving mechanical linkage beyond the button itself, resulting in a low-maintenance device with excellent long-term reliability in Class I, Division 2 atmospheres. The glass-reinforced polyester body also resists the corrosion, UV degradation, and thermal cycling that would otherwise shorten the service life of comparable metallic control stations installed outdoors or in coastal GCC environments.

Engineering Design of the Cooper Crouse-Hinds N2PS1111

The Cooper Crouse-Hinds N2PS1111 enclosure measures a compact 3.6 in deep by 1.5 in wide by 2 in high and weighs approximately 0.4 lb, making it one of the lightest hazardous-area pushbutton stations in the Crouse-Hinds catalog. The Krydon fiberglass-reinforced polyester material provides excellent resistance to corrosion, heat, and sunlight exposure, and the unit carries a NEMA 3/4X/7BCD(Div.2)/12 rating suited to washdown areas, outdoor installations, and process units where dust and moisture ingress must be controlled.

On the Cooper Crouse-Hinds N2PS1111, internally, the single-circuit 1NO-1NC contact block is factory wired and sealed to the enclosure body, with the device requiring only field connection to power and control wiring through its threaded conduit hub. The N2PS1111 is UL 1203 listed and CSA C22.2 certified for Class I, Division 2, Groups B, C and D hazardous locations, and is typically mounted individually or ganged with matching N2S selector switches and pilot lights to build a complete non-metallic control station assembly.

Key Features

The Cooper Crouse-Hinds N2PS1111 delivers a lightweight, corrosion-resistant pushbutton solution for Division 2 hazardous areas:

Factory-sealed Krydon fiberglass-reinforced polyester enclosure eliminates the need for external conduit seals.
1NO-1NC momentary contact configuration rated 600 VAC for direct interface with starters, contactors, and PLC inputs.
NEMA 3/4X/7BCD(Div.2)/12 rating suited to washdown, outdoor, and dusty process environments.
Rated for Class I, Division 2, Groups B, C and D hazardous locations per UL 1203 and CSA C22.2.
Compact, lightweight body (approximately 0.4 lb) reduces mounting stress on panel and pedestal installations.
Excellent corrosion, UV, and thermal resistance for long service life in coastal and offshore GCC environments.
Compatible with the wider N2S non-metallic control station family for ganged multi-function assemblies.
No field-poured sealing compound required, simplifying commissioning and reducing installation labor.

Note on product imagery: this listing is illustrated using the red-bezel N2PS1111R variant photo, the closest genuinely documented reference image available; the standard N2PS1111 ships in the manufacturer’s natural (black) finish. Please confirm bezel colour requirements with our sales team when placing an order.

Industrial Applications

The Cooper Crouse-Hinds N2PS1111 pushbutton station is specified throughout Division 2 hazardous process areas: oil and gas production facilities, refinery utility areas, water and wastewater treatment plants, grain handling and processing operations, and any classified location requiring a lightweight remote start/stop or interlock pushbutton. Its non-metallic construction makes it particularly well suited to corrosive or humid environments where metallic control stations would require more frequent maintenance.

As the officially authorized partner for Cooper Crouse-Hinds, Seven Star LLC distributes the N2PS1111 to EPC contractors, panel builders, and plant maintenance teams across Muscat, Sohar, and the Salalah free zone, supporting both new-build hazardous-area control networks and shutdown/turnaround replacement programs. Our regional stock holding and direct manufacturer relationship help shorten lead times compared with sourcing individually from overseas distributors, with full datasheet and UL certification support available for Oman and GCC regulatory submissions.

Technical Specifications

Key specifications for the Cooper Crouse-Hinds N2PS1111 pushbutton station, model Cooper Crouse-Hinds N2PS1111,:

Parameter	Specification
Model	N2PS1111
Series	N2S non-metallic control stations
Enclosure Material	Krydon fiberglass-reinforced polyester
Contact Configuration	1NO-1NC, momentary
Voltage Rating	600 VAC
NEMA Rating	3 / 4X / 7BCD (Div. 2) / 12
Hazardous Rating	Class I, Division 2, Groups B, C, D
Standards	UL 1203; CSA C22.2
Dimensions	3.6 in D x 1.5 in W x 2 in H
Weight	0.4 lb
Brand	Cooper Crouse-Hinds (Eaton)

Request a Quote for Cooper Crouse-Hinds N2PS1111 N2S Explosionproof Pushbutton Station

Seven Star LLC stocks and supplies the Cooper Crouse-Hinds N2PS1111 pushbutton station for immediate quotation and regional delivery across Oman and the GCC. As the authorized partner for Cooper Crouse-Hinds in Oman and the GCC, we support formal RFQ submissions, provide regional warehouse stock to minimize project lead times, and offer full technical datasheets for download on request. Contact our instrumentation and hazardous-area electrical division today for pricing, lead time, and compliance documentation for your N2PS1111 requirement.

Related Products

Reviews (0)

Reviews

There are no reviews yet.

Be the first to review “Cooper Crouse-Hinds N2PS1111 N2S Explosionproof Pushbutton Station”

About brand

Cooper Crouse-Hinds, part of Eaton's Crouse-Hinds series, is a leading American manufacturer of electrical and instrumentation products engineered for harsh, hazardous, and explosion-proof environments. At Seven Star LLC, we supply Crouse-Hinds' extensive range of explosion-proof lighting fixtures, conduit fittings, cable glands, junction and terminal boxes, plugs and receptacles, and control stations built to withstand corrosive atmospheres and extreme temperature swings. Established in 1897 and backed by more than a century of engineering heritage, these products are certified to ATEX, IECEx, and UL/cCSAus standards for use in classified hazardous locations. Cooper Crouse-Hinds equipment is widely deployed across oil and gas platforms, petrochemical refineries, mining operations, and marine installations where a single spark can trigger catastrophic failure. By supplying authentic Crouse-Hinds hardware, Seven Star LLC helps industrial operators across Oman and the GCC maintain rigorous explosion-proof compliance, protect personnel in classified zones, and extend the service life of critical electrical infrastructure in demanding field conditions.

Frequently Asked Questions

What hazardous locations is the N2PS1111 rated for?

The Cooper Crouse-Hinds N2PS1111 is rated for Class I, Division 2, Groups B, C and D hazardous locations, listed to UL 1203 and certified to CSA C22.2.

What contact configuration does the N2PS1111 use?

The N2PS1111 provides a single 1NO-1NC momentary contact circuit rated 600 VAC, suitable for direct interface with magnetic starters, contactors, or PLC inputs.

Why choose a non-metallic pushbutton station over a metallic one?

The Krydon fiberglass-reinforced polyester enclosure resists corrosion, UV degradation, and thermal cycling far better than metallic bodies, reducing maintenance in coastal, humid, or washdown environments common across the GCC.

Can the N2PS1111 be combined with other N2S devices?

Yes, the N2PS1111 is compatible with the wider N2S non-metallic control station family, allowing it to be ganged with matching selector switches and pilot lights to build a complete multi-function station.

Is Seven Star LLC an authorized representative for Cooper Crouse-Hinds products?

Yes, Seven Star LLC is the officially authorized partner and exclusive regional representative for Cooper Crouse-Hinds in Oman and the GCC, supplying genuine product with full manufacturer traceability and technical support.

+968 90155212