- Automation & ControlView all 2,895 products
- Automation Accessories
- AC Drives
- PLC & I/O Cards
- Industrial Communications
- Vibration Monitoring
- Controllers & Data Acquisition
- Isolator & Barrier
- Safety Switches & Guard Locking
- Motor Soft Starters
- CCTV & Security
- Encoders
- Pneumatic Cylinders
- HMI Displays
- Servo Drives
- Industrial Computers
- Machine Vision
- Automation Software
- Robotics
Brand: VEGA
VEGA VEGASWING 63 Extended Vibrating Level Switch with DPDT Relay
Description
Tube-extended fork: VEGA VEGASWING 63 overview
The VEGA VEGASWING 63 takes the proven fork of the VEGASWING 61 and mounts it on a tube extension. The extension determines the position of the switching point, so a nozzle at the top of a tank can still monitor a level well below it. The sheet describes a universal vibrating level switch for all liquids, usable as empty or full detector, approved overfill protection, dry-run protection or pump protection in vessels. The listing is for the relay (DPDT) version.
VEGASWING 63 technical specifications
Data refer to the relay (DPDT) specification sheet.
| Parameter | Value (datasheet) |
|---|---|
| Model | VEGASWING 63, vibrating level switch with tube extension for liquids, relay (DPDT) |
| Process pressure | -1 to +64 bar (-100 to +6400 kPa / -14.5 to +928 psig); function ensured to 100 bar at max +50 C (threaded versions) |
| Process temperature | -50 to +250 C (-58 to +482 F) |
| Viscosity, dynamic | 0.1 to 10000 mPa s |
| Density | 0.7 to 2.5 g/cm3; 0.5 to 2.5 g/cm3 by switching over |
| Ambient temperature | -40 to +70 C |
| Hysteresis | Approx. 2 mm (0.08 in) with vertical installation |
| Process fitting | Threads from G3/4, 3/4 NPT; flanges from DN 25, 1 in; hygienic fittings |
| Switching point | Determined by the tube extension |
| Fork length | 38 mm |
| Operating voltage | 20 to 253 V AC, 50/60 Hz; 20 to 72 V DC |
Why the extension tube matters
On large storage tanks a top-mounted switch cannot reach the alarm level with a short fork. The extension solves this without a side nozzle or a cable, and the rigid tube is not affected by agitation in the way a suspended probe could be. The switching point is product-independent, so the same instrument can be used on alternating liquids, and set-up needs no medium in the tank.
Uses around the Gulf region
High-level alarms on fuel, diesel and lube-oil tanks, low-level protection of seal-oil and cooling-water reservoirs, overfill protection on chemical storage, and level monitoring in deep sumps. The 63 suits plants where tank roofs are crowded and a deeper installation is easier than a side flange.
How VEGASWING 63 differs from VEGASWING 61
- Mounting: tube extension versus direct fork.
- Switching point: set by extension length versus at the process fitting.
- Applications: the sheet lists vessels for the 63, and vessels and pipelines for the 61.
- Shared data: -1 to +64 bar, -50 to +250 °C, 0.1 to 10000 mPa s, 0.7 to 2.5 g/cm3, hysteresis about 2 mm.
Electrical data and fittings
The relay version runs on 20 to 253 V AC at 50/60 Hz or 20 to 72 V DC. Fittings are threads from G¾ or ¾ NPT, flanges from DN 25 (1 in) and hygienic fittings. Operation is ensured to 100 bar at +50 °C maximum for threaded versions. Ambient temperature is -40 to +70 °C. Other outputs include a contactless electronic switch, transistor (NPN/PNP), NAMUR and two-wire 8/16 mA.
Installation and maintenance of VEGASWING 63
Check the free length under the nozzle and the position of tank internals, and fit the tube so it does not touch the wall. Because the fork is vibrating, no moving parts wear and maintenance costs stay low, as the benefit list in the sheet states. Inspect heavily coating liquids at planned intervals and clean the fork if build-up is visible. State the extension length, process fitting and output type in the enquiry; the exact tube length must be defined at order, since it fixes the switching point. Tell us the tank height and the level at which the alarm should act, and measure from the sealing face of the mounting nozzle to that level, taking the 2 mm hysteresis into account. If the liquid contains foam or a floating layer, remember that the fork responds to the liquid it is immersed in, so the position should be chosen where the real liquid surface is expected. Use the same relay, transistor or NAMUR electronics as on other VEGA switches in your plant to keep spare parts simple, and note that the SIL and overfill-protection approvals are specific to the version, so name the requirement in the request. In tanks with strong turbulence from mixers or jet fills, locate the VEGASWING 63 away from the stream so that splashing does not cause short false switching, and where the liquid is very viscous, allow time for it to drain from the fork when the level falls. The tube is a robust stainless steel construction, which helps in plants where maintenance access is limited and a device is expected to run for years between inspections.
VEGASWING 63 FAQ summary
- What does the tube extension of the VEGASWING 63 do? It determines the position of the switching point, allowing level detection at a distance below the mounting nozzle.
- Which liquids can the VEGASWING 63 handle? All liquids with dynamic viscosity 0.1 to 10000 mPa s and density 0.7 to 2.5 g/cm3 (0.5 by switching over).
- What pressure rating does the VEGASWING 63 have? -1 to +64 bar, with function ensured to 100 bar at a maximum of +50 C for threaded versions.
- Is setup medium-free on the VEGASWING 63? Yes, VEGA lists simple setup without medium and a product-independent switching point.
- What voltage does the relay VEGASWING 63 use? 20 to 253 V AC at 50/60 Hz or 20 to 72 V DC.
Documents and quotation
The manufacturer VEGA VEGASWING 63 datasheet is available as a PDF download on this page, so your engineers can check ranges, materials and dimensions against the data sheet before ordering. To request a quotation send the part number VEGASWING 63 together with the quantity, the required process connection, electronics version and any approval requirement through the RFQ form or by email. Seven Star LLC is an independent supplier serving Oman and the GCC and is not affiliated with the manufacturer; product names and marks belong to their owners.
Other Models in the Vegaswing Range
Seven Star LLC supplies models from the Vegaswing range in Oman and the GCC. Compare the related models below and request a quote for the one that matches your application.
| Model | Category | |
|---|---|---|
| VEGA VEGASWING 61 Vibrating Level Switch with DPDT Relay | Level Switches | View details |
| VEGA VEGASWING 63 Extended Vibrating Level Switch with DPDT Relay | Level Switches | You are viewing this model |
Datasheets & Documents
- Datasheet VEGA VEGASWING 63 Vibrating Level Switch Tube Extension Datasheet Download
Reviews (0)
How would you rate this product? Cancel reply
About brand
VEGA is a German maker of level and pressure instruments. Bruno Grieshaber founded the company in 1959 in Triberg in the Black Forest, and it has been based in Schiltach since 1975, still family owned as VEGA Grieshaber KG. VEGA is best known for radar level sensors: it introduced the first two-wire radar level sensor in 1997 and the first 80 GHz radar sensor for bulk solids, the VEGAPULS 69, in 2015.
Seven Star LLC is an independent supplier listing VEGA radar and guided wave radar transmitters, point level switches, pressure transmitters and signal conditioning instruments for buyers in Oman and the GCC. Sensors are matched from the product code on the type label.
VEGA at a glance
| Origin | Founded by Bruno Grieshaber in 1959 in Triberg, Germany |
|---|---|
| Headquarters | Schiltach, Black Forest, Germany (since 1975) |
| Ownership | Family-owned company: VEGA Grieshaber KG |
| Milestones | First two-wire radar level sensor (1997), first 80 GHz radar for bulk solids, VEGAPULS 69 (2015), VEGAPULS 6X single radar platform for liquids and solids |
| Product families | VEGAPULS radar, VEGAFLEX guided wave radar, VEGASWING and VEGAPOINT switches, VEGACAL capacitive probes, VEGABAR and VEGADIF pressure, VEGAMET and VEGADIS signal conditioning |
VEGA sensor and instrument series
| Series | Type | Typical use |
|---|---|---|
| VEGAPULS 6X, VEGAPULS 69, VEGAPULS 64 | Process radar level transmitters (80 GHz) | Storage and process tanks, reactors with agitators, silos and bulk solids |
| VEGAPULS 11, 21, 31, 42 | Compact radar sensors | Water and wastewater, simple storage tanks; VEGAPULS 42 with IO-Link for machine integration |
| VEGAPULS C 21, C 11, C 22, C 23 | Radar sensors with fixed cable, IP68 | Wet wells, pumping stations, open channels and river levels |
| VEGAFLEX 81, 82, 83, 86 | Guided wave radar (TDR) | Level and interface in liquids, bulk solids, hygienic and high-temperature or high-pressure service (VEGAFLEX 86) |
| VEGASWING 61, 63, VEGAPOINT 21 | Vibrating and capacitive point level switches | Overfill protection, dry-run protection and high or low level alarms |
| VEGACAL 62 to VEGACAL 67 | Capacitive rod and cable probes | Point and continuous level in solids and conductive or adhesive liquids |
| VEGABAR 82, 83, 28, 29, 38 | Pressure transmitters, ceramic or metallic cell | Process pressure and hydrostatic level; compact 18/19 and 28/29/38 versions for utilities |
| VEGADIF 85 | Differential pressure transmitter | DP flow, filter monitoring and level in pressurised vessels |
| VEGAMET 841, VEGADIS 176 | Controller and loop display | Level display, pump control and remote indication of 4-20 mA signals |
Where VEGA instruments are used
VEGA radar sensors measure level in crude oil and product tanks, separators, chemical reactors, cement and aggregate silos, grain stores and water reservoirs. Compact cable radars are widely used in wastewater pumping stations and flood monitoring. Because 80 GHz radar focuses a narrow beam, it can measure past internal structures in a tank, and it is not affected by the temperature, pressure or vapour above the product, which suits hot Gulf storage tanks.
Ordering VEGA instruments: what we need
The product code on the type label (for example PS64.XXXXXXX) fixes the measuring range, antenna or probe, process connection, electronics and approvals. Send it with the serial number. For a new measurement add the medium and its dielectric constant if known, tank or silo height and internals, process pressure and temperature, process connection, output (4-20 mA HART, PROFIBUS PA, Modbus or IO-Link), and any hazardous-area or overfill protection approval required.
Facts checked against VEGA company and product information, October 2026.
Browse VEGA products by category: Level Transmitter, Pressure Instrumentation, Controllers and Data Acquisition.
FAQ
Questions about the VEGA VEGASWING 63 Extended Vibrating Level Switch
Answers from our engineering team on installation, compatibility and integration.
01What does the tube extension of the VEGASWING 63 do?
It determines the position of the switching point, allowing level detection at a distance below the mounting nozzle.
02Which liquids can the VEGASWING 63 handle?
All liquids with dynamic viscosity 0.1 to 10000 mPa s and density 0.7 to 2.5 g/cm3 (0.5 by switching over).
03What pressure rating does the VEGASWING 63 have?
-1 to +64 bar, with function ensured to 100 bar at a maximum of +50 C for threaded versions.
04Is setup medium-free on the VEGASWING 63?
Yes, VEGA lists simple setup without medium and a product-independent switching point.
05What voltage does the relay VEGASWING 63 use?
20 to 253 V AC at 50/60 Hz or 20 to 72 V DC.


















Reviews
There are no reviews yet.