Schneider Electric XBTGT2130 Harmony XBTGT 5.7 in. Touchscreen

XBTGT2130 5.7-inch monochrome touchscreen operator terminal

The XBTGT2130 is a Schneider Electric product listed in the datasheet as: advanced touchscreen panel – 320 x 240 pixels QVGA – 5.7″ – 24 V. The XBTGT2130 is an advanced operator terminal in the Harmony XBTGT series with a 5.7-inch QVGA monochrome touch display. It shows machine data and takes operator commands, and is programmed with Vijeo Designer. Seven Star LLC supplies the XBTGT2130 in Oman and the GCC as an independent supplier based in Muscat.

Reading the reference: XBT is the Harmony operator terminal family, GT the advanced touch series and 2130 the model with a 5.7-inch STN monochrome display. The datasheet carries a discontinuation notice.

Technical specifications of the XBTGT2130

Display, memory and ports

Display: Backlit monochrome STN LCD. Resolution: 320 x 240 pixels QVGA. Size: 5.7 inch. Processor: CPU RISC. Memory: 512 KB SRAM back up of data lithium battery; 16 MB flash EPROM application memory. Serial ports: male SUB-D 9 COM1 serial link RS232C/RS422/RS485 <= 115.2 kbits/s removable screw terminal block power supply; RJ45 Ethernet TCP/IP. Ethernet: 10BASE-T/100BASE-TX. Storage: 1 Compact Flash card >= 1 GB. Backlight life: 58000 hours.

The 16-level grey scale supports bar graphs and trend curves but not colour alarms. A lithium battery backs up the clock and data, which is a maintenance item to replace in service.

Replacing a discontinued terminal: what to check for the XBTGT2130

As the datasheet shows the product as discontinued, consider spares for existing machines. Check the cut-out dimensions, screen resolution, serial protocol and Vijeo Designer version before replacing, so the existing project downloads without redesign.

Future replacement candidates are in the Harmony ST6 or GTO line (for example HMIST6400); migration needs project conversion and testing.

The datasheet downloaded for this page carries lifecycle notices: Discontinued on: Jul 31, 2024. For a plant that already runs this reference that makes the XBTGT2130 a spare-and-replacement item, and it is worth fixing the stock level and the long-term successor plan at the same time. We can discuss compatible alternatives once we know the installation.

Spare-part checklist for the XBTGT2130

• Exact reference and software version of the installed project.
• Cut-out size 156 x 123.5 mm.
• Serial protocol and port wiring.
• Fieldbus card in the slot, if any.
• Battery condition and compact flash card.
• Plan for a replacement series.

Mounting and maintaining the XBTGT2130

Flush-mount in the cut-out with the supplied clips, connect 24 V DC and the controller cable, and download the project from the PC with Vijeo Designer. Check the seal for IP65 on the front face.

Replace the battery on schedule, clean the screen with a soft cloth and avoid sharp objects.

Typical applications of the XBTGT2130 in Oman and the GCC

Operator panels on older packaged skids, pump stations and machines in the region. Place away from direct sun to avoid LCD fading.

Dimensions, environment and approvals of the XBTGT2130

For the XBTGT2130, plan the mounting space from the datasheet: 167.5 mm (W) x 135 mm (H) x 59.5 mm (D). The XBTGT2130 weighs 1 kg. Mounting, derating and enclosure choices follow the environmental data below, which should be compared with the actual panel temperature and the dust and humidity of the site in Oman and the GCC.

Ambient temperature limits in the datasheet: -20 to 60 °C. Relative humidity: 0 to 90 % without condensation. Ingress protection: IP20 IEC 60529 rear panel; IP65 IEC 60529 front panel. Operating altitude: < 2000 m. Vibration resistance: 1 gn 9 to 150 HzIEC 60068-2-6; 3.5 mm 5 to 9 HzIEC 60068-2-6. Shock resistance: 15 gn 11 ms IEC 60068-2-27. Standards listed: EN 61131-2; UL 1604; CSA C22.2 No 14; FCC Class A; IEC 61000-6-2; UL 508. Certifications listed for this reference: cULus; CSA Class 1 Division 2 T4A; UL Class 1 Division 2 T5; C-tick; ATEX zone 2/22; CSA Class 1 Division 2 T5; UL Class 1 Division 2 T4A.

Information to send with an RFQ for the XBTGT2130

• Full reference and quantity required
• Existing equipment, panel or rack it must fit
• Supply voltage, load or signal details of the application
• Required delivery location and timing
• Whether a spare, a replacement or a new installation

Documents and quotation

A datasheet for this product is attached on this page. It lists the electrical, mechanical and environmental data summarised above.

Send us the part number, quantity and application and we will confirm availability and a quotation. Seven Star LLC is an independent supplier in Muscat and does not represent itself as an official channel of the manufacturer.