Brand:

Yokogawa EJX930A Multivariable Transmitter for Mass Flow

Description

Yokogawa EJX930A Multivariable Transmitter for Mass Flow: overview

The Yokogawa EJX930A measures differential pressure, static pressure and process temperature in a single transmitter. With the flow calculation function it outputs a fully compensated mass flow rate for liquids, gases and steam, which removes the need for separate pressure and temperature transmitters and a flow computer in many installations.

Seven Star LLC lists the Yokogawa EJX930A for engineers, maintenance planners and procurement teams in Oman and across the GCC who need to replace an installed unit, extend a loop or specify a new instrument for an oil and gas, utility, water or manufacturing project. The page below summarizes the key facts from the manufacturer datasheet so that a first technical review can be done before the full document is opened.

Key features of the EJX930A

  • EJX930A uses a single crystal silicon resonant sensor.
  • Stated reference accuracy: plus or minus 0.04% of span.
  • Fast response with damping adjustable from 0.00 to 100.00 s, and a 10-segment signal characterizer for the analog output.
  • Integral LCD indicator option with 5-digit display, bar graph and local parameter setting through the external zero adjustment screw.
  • EJX multi-sensing diagnostics detect problems such as impulse line blockage or heat trace breakage, with an optional status output.
  • Cast aluminum housing as standard with IP66/IP67 and Type 4X protection, and stainless steel housing as an option.
  • SIL 2 for the HART type, with FOUNDATION Fieldbus and Modbus variants for other architectures.

EJX930A technical specifications

Two capsules cover differential pressure, M for 1 to 100 kPa and H for 5 to 500 kPa, while static pressure is measured up to 32 MPa. Process temperature comes from an external Pt100 RTD over -200 to 850 C, and the datasheet states that the transmitter is compatible with any Pt100 conforming to IEC 751. In saturated steam mode, temperature is calculated from static pressure with the built-in steam table, so no RTD is needed for saturated steam.

Mass flow accuracy is stated as plus or minus 1.0% of mass flow rate over a 10:1 flow range for liquids and gases, for an uncalibrated orifice installed to the relevant standard, and the totalized mass flow reference accuracy is 1.0%.

The Modbus type connects to flow computers over RS485 and supports up to 32 transmitters in multi-drop, with data status for each measured variable. Configuration of flow is carried out with the FSA120 FlowNavigator software.

The table lists the main values stated in the datasheet for this model. Values depend on the selected capsule, wetted material and options, so always confirm the final model code with the datasheet before ordering.

Parameter Value
Type Multivariable transmitter (differential pressure, static pressure, process temperature)
Differential pressure span M: 1 to 100 kPa; H: 5 to 500 kPa
Static pressure span M and H: 1 to 32 MPa (absolute or sealed gauge)
External temperature input Pt100 RTD, range -200 to 850 C
Differential pressure accuracy Plus or minus 0.04% of span
Mass flow accuracy Plus or minus 1.0% of mass flow rate over a 10:1 flow range (uncalibrated orifice, M or H capsule, auto compensation)
Primary elements (HART 7) Orifice, nozzle, venturi, multiport averaging pitot and cone meters
Communication HART (revision 5 or 7), FOUNDATION Fieldbus, RS485 Modbus
Saturated steam mode Temperature derived from static pressure using the IAPWS-IF97 steam table
Maximum working pressure 32 MPa (4500 psi), M and H capsules
Ambient temperature -40 to 85 C (-30 to 80 C with LCD display)
Process temperature -40 to 120 C
Safety SIL 2 for the HART type
Weight 6.8 kg without indicator, bracket, process connector and RTD cable

Typical applications in Oman and the GCC

  • Oil and gas. Upstream and midstream facilities use the EJX930A for steam flow to process units and turbines, natural gas and fuel-gas flow, compressed air and nitrogen balance and liquid mass flow where density changes with temperature, where a stable digital signal and fast response help the control system and the safety layer.
  • Utilities and power. In power and utility plants across the GCC the EJX930A supports steam, feedwater, fuel gas and cooling circuits, and its diagnostics reduce unplanned inspection walks in hot plant areas.
  • Water and desalination. Desalination and water treatment plants rely on pressure and differential pressure points for pump protection and membrane skid monitoring, and a EJX930A fits those duties with materials chosen for the water chemistry.
  • Manufacturing and process. Petrochemical, fertilizer, food and general manufacturing units in Oman use the EJX930A on reactors, filters, compressors and storage, where HART or fieldbus communication feeds asset-management software.

Selection and compatibility notes

Start the selection of a EJX930A from the measured variable and the calibrated span, then pick the capsule whose upper range limit leaves comfortable margin. The datasheet shows that accuracy is quoted for spans at or above a capsule-specific value and carries an extra term for narrower spans, so very high rangedown should be checked against the formula rather than assumed.

Check the wetted materials against the process and the cleaning or flushing chemicals. Material code S with a Hastelloy C-276 diaphragm is the typical starting point, and other materials can be selected through the model code. The datasheet warns that an unsuitable material can leak process fluid or damage the diaphragm, so the choice must be made with the process conditions in hand.

Output and protocol should follow the control system. A 4 to 20 mA signal with digital communication is standard, and Fieldbus and PROFIBUS PA types have separate datasheets. For hazardous areas, review the approval options listed in the datasheet, such as FM, ATEX, CSA and IECEx, and confirm that the certificate on the nameplate matches the zone and gas group of the installation.

Installation and commissioning of the EJX930A

Mount the EJX930A on a rigid bracket or directly on a manifold, with the process connections oriented to suit the impulse line slope. Use a three-valve or five-valve manifold so that the transmitter can be isolated, equalized and zeroed without breaking process connections. For gas service, mount above the tapping points; for liquids, mount below, and keep both impulse lines at the same temperature to avoid false differential readings.

After mounting, apply the electrical connection through the conduit entry, ground the housing, and power the loop. Perform a loop test and set the zero with the process isolated or the impulse lines equalized. Range the EJX930A either with a HART or BRAIN communicator or locally through the zero adjustment screw. Document the tag, range and damping in the commissioning record.

Maintenance and calibration

The EJX930A needs little routine maintenance. Check zero and span against a reference standard at an interval set by your calibration policy, inspect impulse lines and vent or drain plugs for blockage and leakage, and review the diagnostics reported by the transmitter. Keep the housing covers tight with intact O-rings, because the enclosure rating depends on them. Spare indicator and amplifier units can be changed in the field without touching the process.

Related products and ordering notes for the EJX930A

Other Yokogawa models in the same product area include EJX910A, EJX130A, EJX110A and EJX115A, which may suit neighboring points on the same plant. Seven Star LLC is an independent supplier serving Oman and the GCC and is not affiliated with the manufacturer. Product names and model codes are used only to identify compatible equipment.

When you ask for a quotation, state the exact model code, the measuring range, the output type, any hazardous area approval and the quantity. A complete code lets us confirm that the unit matches the installed unit or the project specification, and it avoids delays caused by option mismatches.

Frequently asked questions in short

What is the Yokogawa this model? The Yokogawa this model is a multivariable transmitter measuring differential pressure, static pressure and process temperature. The this model measures differential pressure, static pressure and process temperature in a single transmitter. What measuring ranges does the this model cover? Datasheet values for the EJX930A: M: 1 to 100 kPa; H: 5 to 500 kPa; M and H: 1 to 32 MPa (absolute or sealed gauge). What accuracy and output does the EJX930A provide? For the EJX930A the datasheet gives plus or minus 0.04% of span. Output and communication: HART (revision 5 or 7), FOUNDATION Fieldbus, RS485 Modbus.

Documents and quotation

The manufacturer datasheet for the EJX930A is attached to this page and gives the complete model and suffix codes, dimensions and options. To receive a quotation, send the RFQ with the part number EJX930A, the quantity and your required range and approvals, and the Seven Star LLC team will reply with availability and delivery information for Oman and the GCC.

Datasheets & Documents
  • PDF Datasheet Yokogawa EJX930A Multivariable Transmitter for Mass Flow Datasheet Download
Reviews (0)

Reviews

There are no reviews yet.

How would you rate this product?

It takes about 10 seconds — just tap a star. Your email is never published.

About brand

Yokogawa is the Japanese measurement and industrial automation company behind the DPharp EJA and EJX pressure transmitters, CENTUM distributed control systems and ProSafe-RS safety systems. Tamisuke Yokogawa set it up in 1915 as an electric meter research institute in Shibuya, Tokyo. It began selling electric meters in 1917, was incorporated as Yokogawa Electric Works in 1920, and has been Yokogawa Electric Corporation since 1986. In 1975 it released CENTUM, which it describes as the world's first distributed control system.

Seven Star LLC is an independent supplier in Muscat. We list Yokogawa transmitters, flowmeters, analysers, controllers, recorders and CENTUM and ProSafe spare modules, and supply them to oil and gas, power, water and process plants in Oman and the GCC by model code.

Yokogawa at a glance

Established 1915, Shibuya, Tokyo, by Tamisuke Yokogawa with Ichiro Yokogawa and Shin Aoki
Milestones Electric meters from 1917; incorporated in 1920; CENTUM DCS in 1975; renamed Yokogawa Electric Corporation in 1986
Headquarters Tokyo, Japan
Product families Pressure and temperature transmitters, magnetic, vortex and Coriolis flowmeters, liquid and gas analysers, controllers and recorders, CENTUM VP DCS, ProSafe-RS safety systems and STARDOM controllers

Yokogawa products we list

Family Models Typical use
Pressure and DP transmitters EJA110E, EJA430E, EJA530E, EJX110A, EJX530A, EJX910A multivariable Pressure, level and DP flow measurement in process plants
Temperature transmitters YTA610, YTA710 RTD and thermocouple signals converted to 4-20 mA, HART or fieldbus
Flowmeters ADMAG AXG, ADMAG AXW, ROTAMASS TI, VY vortex, VF701 Water and conductive liquids, mass flow of hydrocarbons, steam and gas
Analysers TDLS8000 laser gas analyser, FLXA402, FLXA21 DO, E7042UD zirconia cell, K9471DS cover Combustion O2, in-situ gas analysis, pH, conductivity and dissolved oxygen
Controllers and recorders UT35A/UT32A, UT32A-D, UT55A/UT52A, UT75A, UP35A/UP32A, UP55A, YS1700, GX10/GX20, GP10/GP20, GM10, µR20000 Single-loop control, furnace programs and data recording
Control and safety systems CP451-10 processor, ADV161, ADV551, node interface unit, ProSafe-RS, ProSafe-RS Lite, ProSafe-SLS, FCN-500 Spares and expansions for CENTUM DCS, safety systems and STARDOM
Battery packs S9129FA, S9185FA, S9548FA Memory backup batteries for DCS and controller modules

The EJA and EJX transmitters use Yokogawa's DPharp sensor: two silicon resonators whose vibration frequency changes with pressure, so the output is a digital frequency rather than an analogue strain signal. The model code describes the instrument completely. In EJA110E, "110" is a differential pressure transmitter, and the letters after the dash set the span, wetted materials, process connection, electrical output and approvals. When you replace a transmitter, sending the full code from the nameplate avoids a mismatch in range or materials.

Where Yokogawa products are used

In Oman and the GCC, Yokogawa transmitters, analysers and control systems are found in oil and gas production, gas processing and LNG, refineries and petrochemical plants, power and desalination stations, and water treatment. Many plants still run CENTUM CS 3000 and CENTUM VP systems that need spare I/O modules and batteries.

Ordering Yokogawa products: what we need

Send the full model and suffix code from the nameplate (for example EJA110E-JMS5J-912NN/KF22) and the style code. For DCS modules, add the module type and system version. For analysers, send the sensor type, measuring range and process conditions.

Facts checked against Yokogawa's corporate history, October 2026.

FAQ

Questions about the Yokogawa EJX930A Multivariable Transmitter for Mass

Answers from our engineering team on installation, compatibility and integration.

01What is the Yokogawa EJX930A?
The Yokogawa EJX930A is a multivariable transmitter measuring differential pressure, static pressure and process temperature. The EJX930A measures differential pressure, static pressure and process temperature in a single transmitter.
02What measuring ranges does the EJX930A cover?
Datasheet values for the EJX930A: M: 1 to 100 kPa; H: 5 to 500 kPa; M and H: 1 to 32 MPa (absolute or sealed gauge).
03What accuracy and output does the EJX930A provide?
For the EJX930A the datasheet gives plus or minus 0.04% of span. Output and communication: HART (revision 5 or 7), FOUNDATION Fieldbus, RS485 Modbus.
04Which accessories are normally used with the EJX930A?
The EJX930A is normally installed with a three-valve or five-valve manifold, impulse piping and a mounting bracket, plus a HART communicator or configuration software for ranging and diagnostics.
05How can I request a quotation for the EJX930A in Oman?
Send an RFQ with the part number EJX930A, quantity, range, output and approvals through the inquiry form. Seven Star LLC replies with availability and delivery for Oman and the GCC, and the datasheet is on the product page.