Brand:

Rotork SPTM-6V Flameproof Valve Position Transmitter 4-20 mA

Description

Rotork SPTM-6V overview

The Rotork SPTM-6V is a position transmitter, listed in the manufacturer documentation as a flameproof smart position transmitter. The Rotork SPTM-6V is intended for hazardous locations where a flameproof position transmitter is required in place of an intrinsically safe one. This page summarises the published data so that engineers and buyers can confirm the part number quickly, compare it with neighbouring models and prepare a precise enquiry. Plants in the Gulf often run equipment for decades, and accessories of this kind are frequently ordered long after the project was built, so having the exact designation, the published ratings and the manual in one place saves time during shutdown planning.

Every figure on this page comes from the Rotork product literature for the SPTM-6V. Where a value is not published, we do not quote one, and where the exact build matters, please confirm it against the nameplate of the unit you intend to replace. Seven Star LLC is an independent supplier serving Oman and the GCC and is not affiliated with the manufacturer.

Key features of the SPTM-6V

  • Flameproof enclosure.
  • LCD displays the output signal.
  • Micro-processor based and simple to calibrate.
  • IP67 protection.
  • Polyester powder coating for corrosion resistance.

These functions make the SPTM-6V a practical choice where the published data matches the duty, and the specification table below gives the exact figures to use when you check compatibility.

SPTM-6V technical specifications

Connection type 2-wire
Input stroke Linear 10 to 150 mm; rotary 55 to 100°
Output signal 4-20 mA DC
External load resistance Rext up to (Vs – 9) / 20 mA; 750 ohm at 24 V
Supply voltage 9 to 28 V DC
Conduit entry G 1/2 (except NEPSI) or 1/2 NPT (NEPSI only)
Explosion protection Flameproof enclosure; KCs Ex d IIC T6, NEPSI Ex d IIC T6 Gb
Ingress protection IP67
Operating temperature -40 to 85 °C; KCs and NEPSI -40 to 60 °C
Linearity ± 1 % F.S.
Hysteresis / sensitivity Each ± 0.2 % F.S.
Housing material Aluminum with polyester powder coating
Weight 1.3 kg (2.91 lb)

Values are taken from the manufacturer manual for the SPTM-6V and are typical published limits tested under standard laboratory conditions. Always verify the nameplate, certificate and option codes of your unit.

Typical applications in Oman and the GCC

The SPTM-6V sends valve position back to a control system as a 4-20 mA signal. It is added to positioners without an internal analog output, to dampers and to actuators that need independent feedback. In oil and gas, power, water and manufacturing plants in Oman and the GCC the signal supports valve position indication, interlocks and analysis of valve behaviour by the control system. Operating conditions in the region add their own demands: high summer ambient temperatures, dust, humidity near the coast and long periods of continuous operation. Equipment is therefore chosen with attention to temperature range, enclosure protection and the quality of local instrument air, and these are the same points that the specification table above helps you verify.

Selection and compatibility notes for the SPTM-6V

Decide whether you need a linear version for stem travel of 10 to 150 mm or a rotary version for 55 to 100 degrees, and check the loop supply of 9 to 28 V DC against the load of the receiving device. Confirm the hazardous-area scheme, housing material and whether an LCD is required, then match the mounting kit to the positioner or actuator. Compare with the other SPTM models before choosing the SPTM-6V. Beyond the headline numbers, think about the whole instrument air and signal chain. Moisture, oil and particles in compressed air cause most field failures of pneumatic accessories, so confirm dryer performance, filter condition and tubing material before blaming a device. For electrical items, check cable gland type, thread form and certification, and keep segregation between intrinsically safe and non-intrinsically safe wiring. In hot Gulf summers, enclosure surface temperature and ambient limits deserve a second look, especially for valves in direct sunlight where the local temperature can exceed the site design ambient. Writing these items on the data sheet prevents an incorrect substitute at the time of replacement.

Installation and commissioning

Attach the SPTM-6V to the positioner or actuator with the correct lever, namur or rotary kit, connect the 2-wire loop with the polarity shown in the manual, and perform the simple calibration at the closed and open positions. Check that the output follows the valve through its stroke and that the cable gland is sealed to preserve IP67 protection.

Maintenance and service

Verify the 4-20 mA output against the valve position at each outage, inspect the lever and coupling for play, and keep the housing sealed. The unit is designed for simple recalibration if the mounting is disturbed.

Related products and ordering notes

Related items for the SPTM-6V include the YT-1200 pneumatic positioner and YT-1000 series electro-pneumatic positioners that accept external transmitters. Send the actuator type and stroke with your RFQ.

Frequently asked questions about the SPTM-6V

  • What explosion protection is listed for the SPTM-6V? A flameproof enclosure with KCs Ex d IIC T6 and NEPSI Ex d IIC T6 Gb certificates in the manual.
  • What is the weight of the SPTM-6V? The specification table lists a weight of 1.3 kg (2.91 lb) for the aluminum SPTM-6V.
  • What is the output of the SPTM-6V? A 4-20 mA DC output on a 2-wire connection with a 9 to 28 V DC supply.

Documents and quotation

The manufacturer manual that contains the specification for the SPTM-6V is available as a PDF datasheet on this page. When you are ready to order, send an RFQ that quotes the part number SPTM-6V, the quantity, the actuator or valve make and size, the control signal and supply pressure, the hazardous-area scheme and the delivery location. We will respond with availability and lead time for the SPTM-6V. Please also mention whether the unit replaces an existing device and attach a photo of its nameplate if possible.

Other Models in the Sptm Range

Seven Star LLC supplies models from the Sptm range in Oman and the GCC. Compare the related models below and request a quote for the one that matches your application.

ModelCategory
Rotork SPTM-5V Smart Valve Position Transmitter 4-20 mAAutomation AccessoriesView details
Rotork SPTM-6V Flameproof Valve Position Transmitter 4-20 mAAutomation AccessoriesYou are viewing this model
Rotork SPTM-65V Flameproof Position Transmitter, Stainless 316Automation AccessoriesView details
Datasheets & Documents
  • PDF Datasheet Rotork SPTM-6V Flameproof Valve Position Transmitter 4-20 mA Product Manual Download
Reviews (0)

Reviews

There are no reviews yet.

How would you rate this product?

It takes about 10 seconds — just tap a star. Your email is never published.

About brand

Rotork is a British flow control company best known for electric valve actuators. Jeremy Fry founded Rotork Engineering Company in Bath in 1957, the year its first actuator, the 100A, went on sale, and the group is still headquartered in Bath and listed on the London Stock Exchange. Today Rotork makes electric, pneumatic, hydraulic and electro-hydraulic actuators, gearboxes, precision regulators and valve positioners.

Seven Star LLC is an independent supplier listing Rotork actuators, Rotork Fairchild regulators, YTC positioners and spare parts for buyers in Oman and the GCC. Replacement units are matched from the actuator nameplate and wiring diagram number.

Rotork company profile

Origin Founded by Jeremy Fry in 1957 in Bath, England; first product the 100A valve actuator
Headquarters Brassmill Lane, Bath, United Kingdom
Ownership Rotork plc, a public company listed on the London Stock Exchange
Acquired brands Fairchild precision pneumatic controls (2011, Winston-Salem, USA), YTC valve positioners (Young Tech Co., Seoul, 2014), Mastergear gearboxes (2016)
Product families Intelligent electric actuators, control valve actuators, electro-hydraulic and fluid power actuators, gearboxes, precision regulators, positioners and network control systems

Milestones

  • 1957: Jeremy Fry founds Rotork in Bath, England; the first product is the 100A valve actuator.
  • 2011: Fairchild precision pneumatic controls (Winston-Salem, USA) is acquired.
  • 2014: YTC valve positioners (Young Tech Co., Seoul) is acquired.
  • 2016: Mastergear gearboxes is acquired.

Rotork actuators, regulators and positioners

Series Type Typical use
IQ3 Intelligent multi-turn electric actuator Gate and globe valves, penstocks and sluice gates; non-intrusive setup with a Bluetooth setting tool, double-sealed enclosure, data logging
IQT3 Intelligent part-turn electric actuator Ball, butterfly and plug valves and dampers, with the same setup and diagnostics as IQ3
CVA Precision control valve electric actuator Continuous modulating control of linear and part-turn control valves where instrument air is not available
CMA Compact modulating electric actuator Small control valves, chemical injection and metering pumps
Skilmatic SI3 Self-contained electro-hydraulic actuator Spring-return fail-safe and ESD duty with partial stroke testing, needing only an electrical supply
GP / GH Scotch yoke pneumatic (GP) and hydraulic (GH) actuators Large quarter-turn valves on pipelines and ESD service; spring-return or double-acting
CP Compact pneumatic quarter-turn actuator Smaller on-off ball and butterfly valves on plant air
Fairchild 10, 30, 55, 66, M11, 81 Precision pressure regulators Instrument air to positioners and actuators, test benches; Model 66 in stainless steel for corrosive and offshore sites
Fairchild 1000 No-bleed precision regulator Saves instrument air or gas where continuous bleed is not acceptable
Fairchild 10BP, 4000ABP Back pressure regulators Holding upstream pressure in process and test systems
YTC YT-1000, YT-3300 Valve positioners Electro-pneumatic (YT-1000) and smart HART (YT-3300) positioning of linear and rotary pneumatic actuators

Where Rotork equipment is used

Rotork actuators are common on oil and gas pipelines and terminals, refineries and gas plants, water and wastewater networks, desalination plants and power stations. Electric IQ actuators handle isolation valves on long pipelines and water mains, often networked over Rotork Pakscan, Modbus or another fieldbus. Skilmatic and scotch yoke actuators cover emergency shutdown valves, and Fairchild regulators and YTC positioners sit on pneumatic control valves throughout process plants.

Ordering Rotork actuators and spare parts: what we need

Send photos of the actuator nameplate with the model, serial number and wiring diagram number; the wiring diagram is usually inside the terminal cover. Rotork can identify the original build, including options and control interface, from the serial number. For a new application add the valve type and size, required torque or thrust, operating time, mounting flange (ISO 5210 or ISO 5211), power supply, control signal or network protocol, fail-safe requirement and hazardous-area marking. For regulators and positioners send the full model code and the pressure or signal ranges.

Facts checked against Rotork plc company information and product data, October 2026.

FAQ

Questions about the Rotork SPTM-6V Flameproof Valve Position

Answers from our engineering team on installation, compatibility and integration.

01What explosion protection is listed for the SPTM-6V?
A flameproof enclosure with KCs Ex d IIC T6 and NEPSI Ex d IIC T6 Gb certificates in the manual.
02What is the weight of the SPTM-6V?
The specification table lists a weight of 1.3 kg (2.91 lb) for the aluminum SPTM-6V.
03What is the output of the SPTM-6V?
A 4-20 mA DC output on a 2-wire connection with a 9 to 28 V DC supply.
04How is the SPTM-6V different from the SPTM-65V?
The SPTM-6V has a painted aluminum housing, while the SPTM-65V has a stainless steel 316 housing and weighs 2.8 kg.
05How do I request a quotation for the SPTM-6V?
Send the part number SPTM-6V with quantity, actuator or valve details, signal, supply and any hazardous-area requirement, and we will answer your RFQ. Seven Star LLC is an independent supplier and is not affiliated with Rotork.