- Automation & ControlView all 2,610 products
- Automation Accessories
- AC Drives
- PLC & I/O Cards
- Industrial Communications
- Vibration Monitoring
- Controllers & Data Acquisition
- Isolator & Barrier
- Safety Switches & Guard Locking
- Motor Soft Starters
- CCTV & Security
- Encoders
- HMI Displays
- Pneumatic Cylinders
- Servo Drives
- Industrial Computers
- Machine Vision
- Automation Software
- Robotics
Brand: Keyence
Keyence FS-V11 Digital Fiber Amplifier, Main Unit, NPN
Description
Keyence FS-V11: FS-V series NPN fiber amplifier explained
The Keyence FS-V11 is the NPN main unit of the FS-V series, a digital fiber-optic amplifier line that predates the newer FS-N family but is still widely installed on machines around the world. It drives a plastic or glass fiber unit and shows the received light on a four-digit seven-segment display together with a bar graph, so a technician can tune the sensor at a glance. Seven Star LLC supplies the Keyence FS-V11 in Oman and the GCC as an independent supplier in Muscat, which makes it useful for matching spare amplifiers on existing equipment.
Reading the code: FS-V is the series, 11 means a main unit that can run alone and carries the power cable, and no suffix P means an NPN output. The PNP version is FS-V11P, and FS-V12 is the NPN expansion unit.
Three response times are offered, with a timer function that adds ON-delay, OFF-delay or no timer, selectable by a switch. The amplifier also has switchable LIGHT-ON and DARK-ON operation.
FS-V11 technical specifications
| Parameter | Specification |
|---|---|
| Manufacturer / part number | Keyence / FS-V11 |
| Product description | Fiber Amplifier, Cable Type, Main Unit, NPN |
| Type | Main unit |
| Output | NPN |
| Light source | Red LED |
| Response time | 250 µs (FINE) / 500 µs (TURBO) / 1 ms (SUPER TURBO) |
| Operation mode | LIGHT-ON / DARK-ON (switch-selectable) |
| Indicators | Display indicator red LED; four-digit seven-segment red LED digital monitor; bar monitor of one orange and six green LEDs |
| Timer function | ON-delay 40 ms / OFF-delay 10 ms / timer OFF (switch-selectable) |
| Control output | NPN open collector, 100 mA max. (24 VDC max.), residual voltage 1 V max. |
| Protection circuit | Reversed polarity protection, over-current protection, surge absorber |
| Unit expansion | Up to 16 expansion units (17 in total) |
| Mutual interference suppression | FINE: 4 units; TURBO / SUPER: 8 units |
| Power voltage | 12 to 24 VDC ±10 %, ripple (P-P) 10 % or less |
| Current consumption | 50 mA or less |
| Ambient light | Incandescent lamp 10,000 lux max.; sunlight 20,000 lux max. |
| Ambient temperature | -10 to +55 °C, no freezing |
| Relative humidity | 35 to 85 % RH, no condensation |
| Vibration / shock | 10 to 55 Hz, 1.5 mm double amplitude; 500 m/s2 |
| Case material | Polycarbonate |
| Weight | Approx. 80 g |
How the FS-V11 reads a fiber signal
The FS-V11 sends red LED light into the emitting fiber and measures what returns or passes. The display shows the received amount so the threshold can be set between the light and dark states, and the bar monitor shows the margin in a quick visual form with the orange LED marking the threshold position.
LIGHT-ON and DARK-ON are chosen with a switch, so the same amplifier can detect either the presence or the absence of light at the fiber. The timer adds a short ON-delay of 40 ms or OFF-delay of 10 ms where a detection needs filtering or where a short pulse must be stretched for a slow PLC scan.
The three speeds are a trade-off: FINE at 250 µs for fast events, TURBO at 500 µs, and SUPER TURBO at 1 ms, which averages more light and gives the most stable reading on marginal targets.
Where the FS-V11 fits: related FS-V series parts
The FS-V11 is the NPN main unit of the family. FS-V11P is the same unit with a PNP output, and FS-V12 is the matching NPN expansion unit, which draws power through the main unit and adds a detection point on the same DIN rail. The FS-V10 series note in the maker data points out that neither the FS-V12 nor the FS-V10 can be used as a standalone unit, so a main unit like the FS-V11 is required.
When comparing with the FS-N series, the FS-N11N and FS-N11P offer a wider response range down to 50 µs, but the FS-V11 remains a direct like-for-like spare on machines originally built around FS-V.
Selecting FS-V11: ordering checklist
- NPN versus PNP output: FS-V11 is NPN, FS-V11P is PNP.
- Number of detection points and whether an expansion unit FS-V12 will be added.
- Response time needed from 250 µs to 1 ms.
- Timer function and LIGHT-ON or DARK-ON operation.
- Fiber type and length for the target.
- Cabinet temperature: the lower limit is -10 °C and chained units reduce the upper limit to 50 or 45 °C.
Installing, commissioning and maintaining FS-V11
Mount the FS-V11 on a DIN rail using the mounting brackets as the maker notes for multi-unit installations, and keep the output current at 20 mA or less when units are chained. Insert the fibers fully and close the lock lever.
Commission with the target in place using the amplifier’s tuning function, then use the bar monitor to confirm a healthy margin. Record the switch positions for timer and operation mode so a replacement is configured identically.
For maintenance, clean fibers and the amplifier face with a soft dry cloth, replace worn fibers, and keep a spare amplifier because these units are often on older equipment where fast replacement matters.
Typical applications of FS-V11 in Oman and the GCC
The FS-V11 is common on older packaging, electronics and bottling lines in Oman and the GCC, where the original amplifier has to be replaced like for like. Because it is a main unit with display and timer, it also suits simple new builds where the simpler function set is enough.
In dusty plants, remember the ambient-light and temperature rows; avoid placing the amplifier where sunlight falls directly on the sensing tip.
FS-V series models compared with FS-V11
The FS-V models share a housing and differ in output and role.
| Model | Maker description / difference |
|---|---|
| FS-V11 | Main unit, cable type, NPN |
| FS-V11P | Main unit, cable type, PNP |
| FS-V12 | Expansion unit, cable type, NPN, 1-line |
| FS-N11N | FS-N series main unit, NPN |
Information to send with your FS-V11 RFQ
- Exact part number: FS-V11, with the quantity and any matching items listed below.
- Whether an NPN or PNP version is needed.
- Existing fiber units and expansion amplifiers on the machine.
- Timer and operation-mode settings if matching an existing unit.
- Cabinet temperature and chain length.
- Project reference, delivery location in Oman or the GCC and the lead time you need.
Documents and quotation
Send us the part number FS-V11 and we will confirm the available documents, including the maker datasheet and instruction manual where we can provide them. Prices are quoted per request and are not shown on this page.
Seven Star LLC is an independent supplier in Muscat serving Oman and the GCC. We are not affiliated with the manufacturer, and every quotation states delivery and lead time against your RFQ.
Reviews (0)
How would you rate this product? Cancel reply
About brand
Keyence is a Japanese maker of sensors, measuring instruments and machine vision, founded in 1974 by Takemitsu Takizaki and headquartered in Osaka. It sells directly to factories and makes photoelectric and laser sensors, code readers, vision systems, measurement systems and microscopes.
Seven Star LLC sources and supplies Keyence sensors and code readers for machine builders and maintenance teams in Oman and the GCC.
Keyence company profile
| Founded | 1974, Japan |
|---|---|
| Founder | Takemitsu Takizaki |
| Headquarters | Osaka, Japan |
| Sales model | Direct sales |
| Product families | LR-Z and LR-W laser and photoelectric sensors, SR-X code readers, IV and CV-X vision systems, LJ-X laser profilers |
Keyence series listed
Three series appear on this page. The LR-Z is a self-contained CMOS laser sensor. Keyence describes it as detecting by distance and by received light, with one-button teaching, a stainless steel body rated IP68/69K and a range of up to 500 mm depending on the model; the LR-ZB250CP is the listed type. The LR-W500C is a full-spectrum reflective photoelectric sensor from the LR-W series. The SR-X100 is an autofocus 2D code reader.
Keyence products we list
Ordering Keyence sensors: what we need
Keyence type codes are short but exact. Send the complete model, such as LR-ZB250CP, because the letters at the end decide the output type and the connection. Remember that many Keyence sensors need a separately ordered cable or connector, and code readers need a cable, a power supply and often a mounting bracket. List those items, the cable length, and the communication interface your PLC uses.
Facts checked against Keyence's published company profile, October 2026.
FAQ
Questions about the Keyence FS-V11 Digital Fiber Amplifier, Main Unit,
Answers from our engineering team on installation, compatibility and integration.
01Is the FS-V11 NPN or PNP?
It is NPN, with an open-collector output rated 100 mA maximum at up to 24 VDC. The PNP version is FS-V11P.
02What response times does the FS-V11 offer?
It offers 250 microseconds in FINE mode, 500 microseconds in TURBO mode and 1 ms in SUPER TURBO mode.
03Can I add expansion units to the FS-V11?
Yes, up to 16 expansion units can be connected, 17 units in total, using units such as the FS-V12 on the same DIN rail.
04What does the timer function do?
It lets you choose ON-delay of 40 ms, OFF-delay of 10 ms or no timer by switch, which helps filter detections or stretch short pulses.
05What is the operating temperature?
The ambient temperature range is minus 10 to plus 55 °C without freezing, lower when several units are chained.


















Reviews
There are no reviews yet.