Yaskawa VIPA Controls 315-4NE23 (SKU 100-221-380)

Overview

The VIPA 315-4NE23 CPU 315SN/NET is a Yaskawa VIPA Controls PLC CPU powered by SPEED7 technology, with 1 MB work memory extendable to a maximum of 4 MB. The CPU integrates a PROFIBUS-DP master and PtP interface, switchable, and a CP343 Ethernet interface, and is also configurable via TIA Portal.

Identified by SKU 100-221-380 and made in the Czech Republic, the CPU provides the performance of the SPEED7 architecture for demanding automation applications.

Engineering & Design

The CPU provides a work memory of 1.024 to 4.096 KB across the memory extension options, and the integrated Ethernet CP343-Lean interface supports PG/OP communication over the RJ45 port. An active Ethernet CP343 and PG/OP communication interface is also provided, along with the RS485 MPI interface.

The PROFIBUS-DP master interface connects distributed I/O stations, and the PtP interface supports point to point communication, with the two functions switchable for application flexibility. The TIA Portal configuration support allows the CPU to be engineered in the familiar Siemens environment.

Key Features

• SPEED7 technology
• 1 MB work memory, max 4 MB extension
• PROFIBUS-DP master and PtP, switchable
• Integrated CP343 Ethernet
• Active Ethernet CP343 and PG/OP interface
• RS485 MPI interface
• Configurable via TIA Portal
• SKU 100-221-380
• Made in Czech Republic

Applications

• Distributed automation systems
• PROFIBUS-DP networks
• Machine control with Ethernet engineering
• Process control applications
• TIA Portal based projects

Specifications

For high performance control, the VIPA 315-4NE23 CPU is the SPEED7 processor, and Seven Star LLC supplies the VIPA 315-4NE23 CPU with configuration support.

The 315-4NE23 CPU provides the PROFIBUS DP and the Ethernet interfaces for the SPEED7 control.

The VIPA 315-4NE23 CPU is the SPEED7 processor of the VIPA 300S series with the 1 MB work memory for the medium sized automation tasks. The CPU is mounted on the VIPA rail and the system bus connects the signal modules to the processor. The CPU is programmed with the standard Step 7 environment and the integrated PROFIBUS DP master interface connects the distributed I/O of the plant.

The additional PtP interface of the CPU supports the serial communication with the peripherals. The replaceable memory card stores the program and the data of the station, and the CPU is exchanged without the rewiring of the modules. The 315-4NE23 is used as the direct replacement for the existing VIPA 300S CPUs of the plant.

The VIPA 315 CPU is loaded with the project through the MPI interface and the data blocks are stored on the memory card. The PROFIBUS DP master is configured with the bus parameters and the slave addresses of the distributed stations. The CPU is exchanged without the module rewiring and the program is restored from the memory card. The 300S series is fully compatible with the S7-300 footprint of the panel.

The VIPA 315 CPU is used in the compact automation stations of the plant and the memory card supports the program storage without the battery. The processor is fitted with the real time clock for the time stamped events and the data logs of the machine. The spare CPU is exchanged in the minutes and the station is restored from the card.

Why Seven Star LLC

Seven Star LLC supplies the VIPA 315-4NE23 CPU for automation projects across the Gulf, with verified specifications and technical support. Our team assists with CPU selection, memory configuration, and network interface planning.

We serve automation integrators and plant operators with reliable B2B supply of VIPA PLC hardware throughout the GCC.

Installation & Operation

The CPU is installed in the VIPA rack and the PROFIBUS-DP network connects the distributed I/O stations. The integrated Ethernet interface supports PG/OP communication and the engineering connection for the TIA Portal environment.

The work memory extension covers the application size, and the MPI interface connects the programming devices and the operator stations.

Matching the 315-4NE23 to Your Installation

When a VIPA CPU is replaced, the new unit must match the existing hardware configuration and the project in the engineering tool. Before ordering, check:

• The order number 315-4NE23 and the hardware and firmware versions shown on the label of the installed CPU.
• How the project was engineered: in the Siemens SIMATIC Manager environment or in TIA Portal. Also check which CPU type and firmware are declared in the hardware configuration.
• Whether the switchable interface is used as the PROFIBUS-DP master or as the PtP interface in your application.
• The work memory the program needs, and whether a memory extension is required to match the original unit.

Installation and Commissioning

Before replacing a CPU in a running plant, take an online backup of the program and data blocks, including retentive data where possible. Switch off the station, fit the new CPU in the same position and reconnect the PROFIBUS, MPI and Ethernet cables to the same ports. After power-up, check the firmware version, then download the hardware configuration and program from the engineering station or restore them from the memory card. Confirm that all PROFIBUS-DP slaves report without diagnostic errors and that the Ethernet PG/OP connections to the HMI are working. Then switch the CPU to RUN under controlled conditions.

Troubleshooting Tips

• Use the diagnostic buffer of the CPU as the first source of information after a stop or unexpected restart.
• PROFIBUS problems are usually due to terminations, damaged connectors or address conflicts, so check the bus before suspecting the master.
• If the HMI cannot connect over Ethernet, check the IP settings in the hardware configuration and the connection resources configured for PG/OP communication.

Applications in Oman and the GCC

VIPA SPEED7 controllers are used by machine builders and system integrators for packaging lines, water treatment plants, material handling and utility skids across the region. The VIPA 315-4NE23 CPU gives these systems fast program execution and flexible networking. Its compatibility with the familiar S7 engineering environment makes it easy for local maintenance teams to support.

Supply from Seven Star LLC

Seven Star LLC supplies Yaskawa VIPA CPUs and I/O modules for new systems and spares. Send the order number and version data from the installed unit, and we will confirm the correct replacement.

Request a Quote for 315-4NE23 : YASKAWA VIPA CONTROLS SKU : 100-221-380

For the VIPA 315-4NE23 CPU or any related control and instrumentation requirement, contact the Seven Star LLC team. Submit a formal inquiry through our RFQ page with your module, I/O and system configuration, and our specialists will respond with a detailed commercial proposal and the official VIPA documentation.

Related Products

• Yokogawa ADV551 Digital Output Module 32 Channels
• ABB AC500-eCo PLC – Compact & Powerful Automation Controller
• Advantech ADAM-6017 8-Channel Analog Input Ethernet I/O Module
• Siemens SIMATIC ET 200SP Distributed I/O System
• Emerson DeltaV™ PK Controller
• yokogawa-ProSafe-RS Lite