Brand:

Masoneilan 720085946-999-0000 SVI3 Threaded End Cover Kit

Description

Masoneilan 720085946-999-0000 overview

The Masoneilan SVI3 is a HART 7 digital valve positioner for pneumatic control valves. It is loop powered from the 4 to 20 mA control signal, uses non-contact Hall effect position sensing for rotary and reciprocating valves, and is designed with a modular concept in which most sub-assemblies are interchangeable. The manual states that the housing is rated IP66 and NEMA 4x, is available in copper-free aluminum (per API RP 14F) or 316L stainless steel, and carries ATEX, IEC, USA and Canada hazardous-area approvals, with others on request.

The Masoneilan 720085946-999-0000 is the SVI3 Threaded End Cover Spare Part Kit. The threaded end cover closes the terminal compartment at the back of the SVI3 housing. The Masoneilan manual calls it a critical component for safety in hazardous areas: to give a safe seal the cover threads must be fully engaged in the housing, the cover flange must make contact with the housing, and the lock screw is backed out into the cover so that the cover cannot loosen.

Seven Star LLC is an independent supplier serving Oman and the GCC and is not affiliated with the manufacturer. We list the Masoneilan 720085946-999-0000 so that maintenance teams and purchasing departments can search by the exact part number printed in the manufacturer manual and request a quotation without a long identification exchange.

What the 720085946-999-0000 kit does in the SVI3

Because the cover is part of the explosion protection of the enclosure, a damaged thread or a cover that has seized on a corroded housing is not a cosmetic fault. Stocking the 720085946-999-0000 lets a site replace the cover on the day the damage is found instead of running the positioner with a compromised enclosure.

Key features and benefits of the 720085946-999-0000

  • Spare threaded end cover kit listed in Table 9 of the Masoneilan SVI3 manual.
  • Closes the wiring compartment that holds the 4 to 20 mA terminals and the options module terminal block.
  • Works with the lock screw arrangement that stops the cover from loosening in service.
  • Supports the IP66 and NEMA 4x rating of the SVI3 housing.
  • Available as a separate kit so the cover can be changed without replacing the positioner.

Technical specifications for 720085946-999-0000

Parameter Value
Manufacturer Baker Hughes, Masoneilan brand
Part number 720085946-999-0000
Kit description SVI3 Threaded End Cover Spare Part Kit
Positioner Masoneilan SVI3 digital valve positioner
Housing options Copper-free aluminum or stainless steel 316L
Enclosure protection IP66 and NEMA 4x
Hazardous-area approvals of positioner ATEX, IEC, USA and Canada, others on request

Values come from the manufacturer installation and maintenance manual and fact sheet. Specifications are subject to change without notice, so confirm the revision of the documents against the nameplate of your positioner before you order.

Typical applications in oil and gas, utilities, water and manufacturing

Digital positioners are fitted to control valves in refineries, gas processing plants, compressor stations, power and utility boilers, desalination and water treatment plants, and general manufacturing across Oman and the Gulf. In these services a positioner that is out of service usually means a valve that cannot be controlled from the DCS, so a ready spare is cheaper than a shutdown. The 720085946-999-0000 serves exactly this need for plants that run the SVI3 on their control valves.

The Gulf climate adds its own demands: high ambient temperatures, dust, salt-laden air on the coast and sun exposure on outdoor skids. The positioner housing is built for outdoor and corrosive industrial service, and keeping the right module on the shelf lets a maintenance crew return a valve to automatic control within the same shift.

Selection and compatibility notes

Match the cover kit to the housing construction. The manual lists standard and marine kits separately, and offers a stainless steel 316L housing in addition to the grey-painted copper-free aluminum housing. If the positioner nameplate or purchase record shows the marine option, order the marine kit. Do not mix covers from other positioner brands because the thread and flameproof joint are specific to this housing.

Always quote the complete number 720085946-999-0000 including the -999-0000 suffix when you send a request. Similar looking numbers in the same table identify different construction, temperature or diagnostic variants, and one wrong digit means a part that does not fit your positioner.

Installation and commissioning of the 720085946-999-0000

Isolate the valve from the process, purge actuator air, and remove power or confirm the local atmosphere permits opening the enclosure. Replace the cover following the sheet packed with the 720085946-999-0000 kit, engage the threads fully until the cover flange touches the housing, and back the lock screw out into the cover.

The manual states that only qualified service personnel may make repairs, that only parts supplied by the factory are permitted, including mounting screws and O-rings, and that substitution of components can void safety approvals.

Maintenance and troubleshooting

At each inspection check that the lock screw is still in position, that no moisture is trapped behind the cover, and that the threads are clean and undamaged. The manual asks users to report cracks in the housing or openings in the connections to the manufacturer.

Related kits, ordering notes and FAQ summary

The 720085946-999-0000 is one of several SVI3 spare part kits listed in the manufacturer manual, which also covers modules for the pneumatics, the electronics, the display and the covers. When you plan a spares package for a plant, review the full kit table against the positioners installed, and send us the complete list so we can quote the numbers together. We also supply other Masoneilan control valve and regulator parts on request.

Typical questions from buyers cover what the kit replaces, how it differs from neighbouring kits, which positioner it fits and how to order it. The answers below summarise the points above for quick reference. For a positioner with a faded nameplate, send us a photo and the valve tag, and we will help you match the 720085946-999-0000 to the right unit.

Documents and quotation

A manufacturer datasheet for the SVI3 is available to download from this page. To receive a quotation for the 720085946-999-0000, send an RFQ to Seven Star LLC stating the part number, the quantity, the positioner model or serial number and the delivery location in Oman or the GCC. Our team will confirm availability and lead time promptly.

Other Models in the Svi3 Kit Range

Seven Star LLC supplies models from the Svi3 Kit range in Oman and the GCC. Compare the related models below and request a quote for the one that matches your application.

ModelCategory
Masoneilan 720085945-999-0000 SVI3 Conduit Entry Plug KitValve PositionersView details
Masoneilan 720085946-999-0000 SVI3 Threaded End Cover KitValve PositionersYou are viewing this model
Datasheets & Documents
  • PDF Datasheet Masoneilan 720085946-999-0000 SVI3 Threaded End Cover Kit Datasheet Download
Reviews (0)

Reviews

There are no reviews yet.

How would you rate this product?

It takes about 10 seconds — just tap a star. Your email is never published.

About brand

Masoneilan is a control valve brand of Baker Hughes with roots going back to 1882. Its Camflex eccentric plug rotary valve, 21000 series globe valve and SVI digital positioners are fixtures in refineries, gas plants and power stations. Every valve carries a serial number and a long model number that define the actuator, body and trim.

Seven Star LLC is an independent supplier listing Masoneilan control valves, actuators, regulators, positioners and level instruments for buyers in Oman and the GCC. We source complete valves as well as Masoneilan spare parts against that nameplate data.

Masoneilan at a glance

Origin Mason Regulator Company, Boston area, USA (1882). It acquired the Neilan Company of California in 1931, and the two names became Masoneilan.
Ownership Dresser Industries from 1985, then GE Oil & Gas, now Baker Hughes
Milestones the company cites Cv flow coefficient introduced (1944), spring-diaphragm actuators (1955), Camflex rotary globe valve (1968), Lo-dB low-noise trim (1975), LincolnLog axial-flow letdown valve (1982), Varipak (1984), V-Log (1998), SteamForm steam conditioning valve (2002)
Product families Globe, rotary, butterfly and severe-service control valves, actuators, digital positioners, self-operated regulators and displacer level instruments
Typical duty Throttling control of steam, gas, hydrocarbons and water, high-pressure letdown, anti-cavitation and low-noise service

Masoneilan control valves and actuator series

Series Type Typical use
21000, 21009 Top-guided and cage-guided globe valves General process control. Cryogenic (21000 C), bellows seal (21000 BS) and API 6A versions are also made
41005 Cage-guided globe valve Higher pressure drop and larger sizes, up to 30-36 inch extended sizes; VRT anti-cavitation and API 6A versions
35002 Camflex II Eccentric plug rotary control valve Erosive, flashing and dirty service; HC high capacity, DVD low noise and GR globe replacement versions
37002 MiniTork II, 39003/39005, 33000 Butterfly control valves, high-performance and triple-offset Large flows at low pressure drop, and tight-shutoff duty
28000 Varipak Microflow control valve Very small flows, with adjustable Cv
78400/18400 LincolnLog, 77000, 49000 V-Log Severe-service multi-stage valves High-pressure liquid letdown, anti-cavitation and gas noise reduction
84000/84003 SteamForm, DSH Steam conditioning valves and desuperheaters Turbine bypass and steam pressure and temperature reduction
87/88, 37/38, 51/52/53 Spring-diaphragm and piston actuators Linear and rotary valve actuation; diaphragms and soft-goods kits are listed separately
SVI3, SVI II AP, SVi1000, SVI FF Digital valve positioners HART or FOUNDATION Fieldbus positioning with valve diagnostics; the SVI II ESD adds partial stroke testing
4700/4800, 8013 Pneumatic and electro-pneumatic positioners Older installed base. Many sites move to SVI positioners at overhaul
525/526, 535/536, 171-174 Self-operated pressure regulators Pressure reducing and back-pressure control without external power
12400, 12800 Displacer level transmitters and controllers Digital (12400, HART, SIL 2 version 12420) and pneumatic (12800) level control on separators and vessels

Where Masoneilan valves are used

Throttling duty on steam, hydrocarbons, gas and water is the daily work of these valves. Typical services are feedwater and steam conditioning in power plants, separator and compressor loops in gas processing, high-pressure-drop letdown, cryogenic service in LNG and air separation, and general flow, pressure and level control in refineries and chemical plants.

Ordering Masoneilan valves and spare parts: what we need

For spare parts the serial number decides the order, because the factory record behind it lists the trim, materials and actuator. Send a clear nameplate photo with the serial number, model number, size and pressure class. For a new valve, add the process data: fluid, inlet and outlet pressure, temperature, minimum, normal and maximum flow, required leakage class, fail position, air supply and control signal. When an older positioner or valve series is no longer made, we quote the successor that Baker Hughes names and list the mounting kit it needs.

Frequently requested Masoneilan models: Masoneilan 4700E/4800E Electropneumatic Valve Positioner, Masoneilan 28000 Series VariPak Valve Seal & O-Ring Kit, Masoneilan 535H Single-Seat Pressure Reducing Regulator.

Facts checked against Baker Hughes Masoneilan product information and the company's published timeline, October 2026.

FAQ

Questions about the Masoneilan 720085946-999-0000 SVI3 Threaded End

Answers from our engineering team on installation, compatibility and integration.

01What is the Masoneilan 720085946-999-0000?
It is the threaded end cover spare part kit for the SVI3 digital valve positioner, as listed in the spare parts table of the manufacturer manual.
02Why is the SVI3 end cover treated as a safety item?
The manual calls the threaded end cover a critical component for safety in hazardous areas and requires full thread engagement, flange contact and the lock screw backed out into the cover.
03Does the kit differ for marine positioners?
Yes. Marine construction positioners have their own kit in the manual, so confirm the positioner construction before ordering the standard cover.
04Do I need special tools to change the cover?
The manual does not call for special tools for the cover itself, and the instructions are packed in the box with the kit. Always follow local hazardous-area work rules.
05How do I request the 720085946-999-0000?
Send an RFQ to Seven Star LLC with the part number, quantity and housing type. We are an independent supplier serving Oman and the GCC and reply with availability.