Bently Nevada 3500/42M Proximitor Seismic Monitor
Overview
The Bently Nevada 3500/42M Proximitor Seismic Monitor is a four-channel monitor that protects machinery by continuously comparing monitored parameters against configured alarm setpoints and driving alarms when the setpoints are exceeded. It accepts input from proximity transducers and seismic transducers, conditions the signals, and communicates essential machine information to both operations and maintenance personnel. The 3500/42M is one of the standard monitor modules of the 3500 series machinery protection rack.
The 3500/42M carries the protection functions for both proximity and seismic inputs in one four-channel module, which is the reason it is one of the most common monitor modules in 3500 racks. The +4 to +20 mA analog outputs feed the DCS or PLC with live vibration values, and the alarm and danger logic is processed with the same voting options as the rest of the 3500 series. The monitor is configured with the standard 3500 Series software, so the installed base is easy to maintain with a single engineering tool.
Engineering and Design
The monitor conditions the proximity and seismic signals into channel values, applies the configured alarm and danger setpoints, and drives the relay and communication outputs of the rack. Analog outputs provide a +4 to +20 mA value proportional to the channel full-scale, allowing live values to be retransmitted to the DCS or PLC. Transducer power of -24 Vdc is provided on the monitor terminals for the proximitors, and seismic inputs accept accelerometer or velocity signals with 500 mV per inch per second pk or 5.8 mV per mm per second pk calibration.
The 3500/42M is installed in the 3500 rack, and the field wiring from the proximitors and seismic transducers is terminated on the monitor front or on external termination blocks with Euro-style connectors. Configuration assigns each channel to a vibration measurement, sets the gap and scaling, and defines the alarm logic fed to the relay modules. Commissioning includes verifying each channel reading against a static shaft position and confirming the alarm trip points with the operations team.
The 3500/42M is checked during the protection system functional test by injecting a simulated signal at the transducer terminals and confirming the channel reading, the alarm trip and the analog output. The static gap of each proximitor channel is recorded at commissioning and compared at each shutdown, and the transducer power rail is measured at the monitor terminals to confirm -24 Vdc under load. When a monitor is replaced, the channel configuration and alarm setpoints are restored from the system file and each channel is re-verified against the transducer signal. The rack power supplies and the monitor slot position are confirmed before the module is inserted.
Key Features
- Four-channel Proximitor and seismic monitor
- Accepts proximity and seismic transducer inputs
- Continuous comparison against alarm setpoints
- +4 to +20 mA analog outputs proportional to full-scale
- -24 Vdc transducer power supply
- Seismic inputs 500 mV/(in/s) pk or 5.8 mV/(mm/s) pk
- 3500 series rack monitor with alarm and danger logic
Applications
The 3500/42M protects turbines, compressors, generators, pumps and fans in power generation, oil and gas, refining and petrochemical plants. It provides radial vibration, axial position and seismic monitoring on critical machines, with alarm and danger outputs to the plant protection logic and live values to the control system.
Specifications
| Module | 3500/42M Proximitor Seismic Monitor |
| Channels | 4 |
| Inputs | proximity and seismic transducers |
| Analog output | +4 to +20 mA proportional to full-scale |
| Transducer power | -24 Vdc |
| Seismic input options | 500 mV/(in/s) pk or 5.8 mV/(mm/s) pk |
| Application | alarm and danger protection in 3500 racks |
| Configuration | 3500 Series software |
Why Seven Star LLC
Seven Star LLC supplies genuine Bently Nevada 3500 series monitors, including the 3500/42M, to machinery protection and reliability programmes across Oman and the GCC. Every monitor is verified against its exact part number and revision before your order is confirmed, and our team confirms channel configuration and alarm logic for your protection scheme.
Technical Specifications
The Bently Nevada 3500/42M Proximitor/Seismic Monitor is a 4-channel-pair machinery protection monitor within the 3500 rack platform, accepting proximity, velocity, or acceleration (seismic) transducer inputs for vibration and position measurement with onboard alarm processing. It supports 1–4 transducer inputs at a standard 10kΩ input impedance, with a +4–20mA recorder output (0–12V DC compliance over 0–600Ω) and an update rate of 100ms or faster.
Depending on the transducer type connected, the module supports sensitivities of 3.94 or 7.87 mV/µm for radial vibration, 40 or 80 mV/µm for REBAM proximity measurement, 10 mV/(m/s²) for acceleration, and 20, 5.8, or 4 mV/(mm/s) peak for velocity, with a frequency response spanning 4–4000 Hz (programmable) for radial vibration and up to 9155 Hz for acceleration inputs. Measurement accuracy is ±0.33% typical (±1% max), with setpoint accuracy of 0.13%. Operating temperature is -30°C to +65°C for internal/external termination configurations (0°C to +65°C for internal-barrier configurations), and storage temperature extends to -40°C to +85°C. The monitor module measures approximately 241.3 × 24.4 × 241.8mm, weighs 0.91kg, and draws 7.7W.
I/O Flexibility and Applications
Ten different I/O module variants (part numbers 128229-01 through 140482-01) support different combinations of transducer types and intrinsic-safety barrier options, allowing one monitor family to be configured for radial vibration, thrust position, differential expansion, REBAM, acceleration, velocity, or shaft-absolute measurement depending on which I/O module is fitted — a flexibility that lets a single 3500 rack cover several different measurement types across a machine train from one monitor family rather than requiring a separate dedicated monitor type for each measurement.
Standards and Why Seven Star LLC
The 3500/42M carries EN 61000-6-2/-4 and EN 61010-1 compliance, the EU Low Voltage Directive, RoHS (including China RoHS), cNRTLus (Class I Zone 2/Division 2, with IS barrier options extending coverage to Division 1), ATEX/IECEx, DNV GL/ABS marine classification, and FCC Part 15. Seven Star LLC supplies genuine Bently Nevada (Baker Hughes) 3500/42M monitors and matching I/O modules to power generation, oil & gas, and petrochemical customers across Oman and the wider GCC, and confirms the exact I/O module variant required for the customer’s transducer types and hazardous-area classification before confirming an order.
Request a Quote for Bently Nevada 3500/42M Proximitor Seismic Monitor
Submit a formal inquiry through our RFQ page with the monitor part number and revision, your transducer list and the required channel configuration. We will confirm the correct 3500/42M monitor and respond with a formal quotation. | Inquiry Form
Related Products
Bently Nevada, a division of Baker Hughes, is a global leader in asset condition monitoring and protection technologies. For over six decades, the company has set the industry standard in machinery diagnostics, vibration analysis, and predictive maintenance solutions.
Its advanced systems and sensors are designed to ensure maximum equipment uptime, safety, and efficiency across power generation, oil & gas, and industrial manufacturing sectors. From vibration probes and monitoring racks to software platforms like System 1, Bently Nevada products enable real-time insight and data-driven decision-making.
Seven Star LLC supplies genuine Bently Nevada equipment, sensors, and monitoring solutions to clients across the Middle East, providing trusted reliability, expert support, and seamless integration for modern industrial operations.
Related products
Reviews
There are no reviews yet.