Bently Nevada 3300 XL Proximitor Sensor 330180-X0-05
Overview
The Bently Nevada 330180-X0-05 is a 3300 XL Proximitor Sensor, the signal conditioning module of the 3300 XL eddy-current proximity transducer system. The Proximitor supplies radio-frequency power to the probe, receives the modulated signal, and converts the probe gap into the linear voltage used by monitors and protection systems. The 330180 family operates with 3300 XL 5 mm and 8 mm probes, and the -X0-05 configuration is supplied as a genuine Bently Nevada spare for installed transducer systems.
The 3300 XL Proximitor range is the standard signal conditioner of the 3300 XL transducer system and is widely specified by OEMs and end users who follow API 670 machinery protection practice. The module is available with panel or DIN rail mounting, matching the two principal panel layouts used in machinery cabinets. Because the Proximitor carries the oscillator electronics for the whole transducer chain, the complete probe, extension cable and Proximitor set is selected together, and replacing one element without the others is only possible when the system length digits match.
Engineering and Design
The 3300 XL Proximitor uses a tuned oscillator to drive the probe tip; as the target approaches the tip, the eddy current loss changes and the oscillator output is converted to a gap-proportional DC voltage. The 3300 XL 8 mm system provides 7.87 V/mm (200 mV/mil) sensitivity, giving a strong, clean signal for the monitor input. The Proximitor is powered from the monitor or a separate -24 Vdc supply and includes a test jack that lets maintenance staff verify performance from the terminal strip without removing field wiring.
The Proximitor is mounted on a panel or DIN rail in the junction box or control cabinet, and the extension cable from the probe is connected to the Proximitor input. The output is routed to the monitoring rack or transmitter, and the gap voltage is checked during commissioning with the supplied test plug. The 330180-X0-05 variant is verified against the probe length and system length before installation, because probe, extension cable and Proximitor lengths must add up to the configured system length.
The Proximitor is mounted in the junction box close to the machine, where the panel temperature stays within the operating range and moisture is controlled. During routine vibration checks, the gap voltage is recorded at the test jack and compared with the commissioning baseline; a shift in the static gap voltage normally indicates probe tip wear, shaft position change or cable damage rather than Proximitor failure. The extension cable connector is checked for tightness, because a loose ClickLoc joint causes intermittent signals that look like vibration spikes. When a Proximitor is replaced, the system length digits on the new unit must match the installed probe and cable combination, otherwise the gap reading is offset and the machine must be re-gapped.
Key Features
- 3300 XL Proximitor Sensor for eddy-current transducer systems
- Operates with 3300 XL 5 mm and 8 mm probes
- 7.87 V/mm (200 mV/mil) output at 8 mm system sensitivity
- -24 Vdc transducer power supply
- Test jack for verification without removing field wiring
- Panel or DIN rail mounting options
- Compatible with 3300 XL extension cables and monitors
Applications
The 330180 Proximitor is used wherever 3300 XL probes monitor radial vibration, axial position and shaft eccentricity: turbines, compressors, pumps, motors, generators and fans in power generation, oil and gas, petrochemical and utility plants. It serves as a direct replacement module in existing 3300 XL installations.
Specifications
| Part number | 330180-X0-05 |
| Family | 3300 XL Proximitor Sensor |
| System | 3300 XL eddy-current proximity transducer |
| Probe compatibility | 3300 XL 5 mm / 8 mm probes |
| Sensitivity | 7.87 V/mm (200 mV/mil) at 8 mm |
| Supply | -24 Vdc transducer power |
| Test | integral test jack, 3300 XL test plug (148722-01) |
| Cable | extension cable system, matched lengths |
Why Seven Star LLC
Seven Star LLC supplies genuine Bently Nevada 3300 XL Proximitors, probes and extension cables to reliability and maintenance programmes across Oman and the GCC. Every Proximitor is verified against its complete part number and configured system length before your order is confirmed, and our team advises on the correct probe and cable combination for your machine.
Call To Action
Submit a formal inquiry through our RFQ page with the Proximitor part number 330180-X0-05, your probe part number and the system length. We will confirm the correct 3300 XL configuration and respond with a formal quotation. | Inquiry Form
Bently Nevada, a division of Baker Hughes, is a global leader in asset condition monitoring and protection technologies. For over six decades, the company has set the industry standard in machinery diagnostics, vibration analysis, and predictive maintenance solutions.
Its advanced systems and sensors are designed to ensure maximum equipment uptime, safety, and efficiency across power generation, oil & gas, and industrial manufacturing sectors. From vibration probes and monitoring racks to software platforms like System 1, Bently Nevada products enable real-time insight and data-driven decision-making.
Seven Star LLC supplies genuine Bently Nevada equipment, sensors, and monitoring solutions to clients across the Middle East, providing trusted reliability, expert support, and seamless integration for modern industrial operations.
Related products
Reviews
There are no reviews yet.