Delta DOP-100 W Type Advanced Widescreen HMI 4.3-15 inch

Delta DOP-100 W Type widescreen HMI: what the series covers

The Delta DOP-100 W Type is the widescreen branch of Delta’s advanced HMI range. It combines a narrow-frame wide display with Ethernet connectivity and multilingual text input, and it is sold in five sizes from 4.3 inch to 15 inch. Seven Star LLC supplies the DOP-100 W Type in Oman and the GCC as an independent supplier in Muscat, and this page explains how the model codes map to screen sizes and what each size offers so that the right panel can be quoted the first time.

The five models in the DOP-100 W range are DOP-103WQ (4.3 inch), DOP-107WV (7 inch), DOP-110WS (10.1 inch), DOP-112WX (12 inch) and DOP-115WX (15 inch). The two digits after DOP-1 give the screen class, the letter W marks the widescreen type, and the final letter pair indicates the display resolution family (Q, V, S, X).

DOP-100 W technical specifications

The table merges the manufacturer’s model columns; which CPU, memory and port count belongs to which size is shown in the family table further down, and Delta’s dimension drawings should be checked before a cutout is cut.

How the DOP-100 W Type works

A DOP-100 W panel is a stand-alone operator terminal. Screens are designed on a PC with Delta’s HMI software, downloaded over USB or Ethernet, and then run locally on the panel, so the display keeps drawing pages and handling touch even if the controller is briefly busy. The panel reads and writes registers in the connected PLC, drive or instrument through its serial or Ethernet ports and shows them as numeric fields, bars, trends, alarms and buttons.

Multi-language input is useful in Gulf plants where crews read Arabic, English and other languages. Recipe parameters and operator account names can be typed in the chosen language rather than in a single fixed alphabet, and the panel supports 16 languages in total.

Where the DOP-100 W fits in an automation system

The DOP-100 W Type sits between the basic DOP-100 S Type (IP65, 4.3 inch only) and the DOP-100 M Type (12 and 15 inch with video and camera input). It is the usual choice when a wide screen and Ethernet are wanted but multimedia is not. Machines that already use Delta drives, PLCs or servo drives often pair them with this panel; other controllers can be reached through the panel’s serial and Ethernet drivers, subject to the driver list of the software version in use.

For hand-held teaching and jog functions the DOP-100 H Type is a separate product, and for the newer low-cost 7 and 10.1 inch panels with MQTT and OPC UA the DOP-100 L Type is the related range. Confirm which of these fits before ordering a DOP-100 W model.

Selecting a DOP-100 W model

• Screen size drives everything else: page density, cutout and the CPU class. The 4.3 inch DOP-103WQ is suited to compact control boxes; the 7 inch DOP-107WV is a common middle choice.
• Check the port count. Only the 12 inch and 15 inch models list two Ethernet ports and four serial COM ports; the smaller sizes have one Ethernet port and fewer serial ports.
• The SD slot is not available on the smallest model. If recipes or logs must be moved with a card, avoid the 4.3 inch size.
• Confirm the cutout against the mounting table below. Panels are mounted from the front of the door or enclosure plate.
• Verify the controller protocol. Ask for the driver name and software version before ordering.

Installation, commissioning and maintenance of DOP-100 W panels

Fit the panel into a clean cutout of the stated mounting size and clamp it evenly with the supplied fixings. Keep the operating ambient between 0 and 50°C inside the enclosure; in Gulf summers a closed panel in direct sun can exceed this, so shade or climate control is advisable. Route serial and Ethernet cables away from motor and drive cables, and use the built-in isolation as a safeguard rather than a substitute for good shielding.

During commissioning, download the project, test every PLC address with the panel in run mode, then store a backup of the project file. Keep a spare panel of the same size where downtime is costly, because a project can be reloaded in minutes onto an identical model. Clean the touch surface with a soft damp cloth and avoid solvents.

Typical applications in Oman and the GCC

The manufacturer lists the W Type for packaging, textile, woodworking, rubber and plastics machinery. In Oman and the GCC these panels are typically found on packaging lines in food and beverage plants, small water treatment skids, plastic processing machines in industrial zones, and OEM equipment exported to the region. Heat, dust and humidity are the main concerns, so panel placement and enclosure sealing matter more than the display itself.

DOP-100 W model family and mounting dimensions

Information to send with a DOP-100 W RFQ

• Exact model code (for example the full DOP-1xx code including size letters), quantity and required delivery.
• Mounting method and cutout available on the machine or panel door.
• Communication needed: PLC brand and protocol, serial standard (RS-232 / RS-422 / RS-485) or Ethernet.
• Whether a spare unit, a protective film or a programming cable is needed alongside the panel.

Documents and quotation

Delta publishes its HMI catalogue and dimension drawings behind a download centre. Send us the DOP-100 W model code and we will confirm which documents we can provide with the quotation.

Seven Star LLC quotes against the exact model code, so please state the size and any option letters. Lead time, quantity and delivery point in Oman or the GCC are confirmed on request.