Brand:

Weidmuller WDK 2.5 Double-Level Terminal Block

Description

Weidmuller WDK 2.5 double-level terminal, order no. 1021500000

1021500000 is the Weidmuller WDK 2.5, a multi-tier modular terminal with screw connection: two levels with four connections, rated 400 V, 2.5 mm². Both levels sit in a single housing of dark beige Wemid with UL 94 V-0 rating, so one block takes the place of two feed-through terminals on the rail. Seven Star LLC supplies 1021500000 in Oman and the GCC as an independent supplier in Muscat; the pack quantity listed is 100 pieces.

Double-level terminals save rail length. In a cabinet with many field cables, a WDK block halves the rail length compared with single-level terminals, which can decide whether a given enclosure is large enough. The two levels are not connected internally, so each level carries its own potential.

Decoding WDK 2.5 for order number 1021500000

Element Value Meaning
WDK Series Multi-tier modular terminal block
2.5 2.5 mm² Rated conductor cross-section
Levels 2 Two tiers; two clamping points per level; levels not cross-connected internally
Order no. 1021500000 Article number to quote

Technical specifications for 1021500000

Parameter Specification
Manufacturer / part number Weidmuller / 1021500000 (type WDK 2.5)
Version Multi-tier modular terminal, screw connection, dark beige, 4 connections, 2 levels, TS 35
Rated cross-section 2.5 mm²
Rated voltage 400 V
Nominal current 24 A
Current at maximum wire size 32 A
Rated impulse withstand voltage 6 kV
Contact resistance (IEC 60947-7) 2.66 mΩ
Power loss (IEC 60947-7) 0.77 W
Clamping range 0.05 mm² to 4 mm²
Stripping length 10 mm
Tightening torque 0.4 Nm to 0.6 Nm
Clamping screw / blade M 2.5 / 0.6 x 3.5 mm
Width 5.1 mm
Height 69.5 mm
Depth including rail 63 mm
Net weight 3.62 g
Number of potentials / levels 2 / 2
Explosion protection data Ex eb II C Gb, ATEX 275 V, 21 A

Electrical behaviour of 1021500000

Each level is rated for 24 A nominal current at 400 V, with 32 A at the largest wire size. Impulse withstand is 6 kV and contact resistance 2.66 mΩ, which is higher than the 1.33 mΩ of the single-level WDU 2.5. Note that the voltage and current ratings under the increased-safety entries are lower (275 V, 21 A) than the normal ratings, so use those figures for hazardous-area wiring.

The clamping range runs from 0.05 mm² to 4 mm², with stripping length 10 mm and torque 0.4 Nm to 0.6 Nm on the M 2.5 screw. A cross-connection can be fitted by screw where levels or adjacent blocks must be commoned.

Planning a layout with WDK 2.5

The block is 5.1 mm wide, 69.5 mm high and 63 mm deep including the rail, which is deeper than the 47 mm of the single-level WDU 4. Check door clearance and the space for cable ducts, because cables arrive at two heights. Plan marking carefully: each level needs its own markers so that the upper and lower circuits are not confused during commissioning.

Related terminals for 1021500000

Single-level alternatives from the same maker include WDU 2.5 (1020000000) and the 4 mm² WDU 4 (1020100000). For protective earth use WPE 2.5 (1010000000). Use WDK where many signal and control points must fit into little rail length, and use WDU where the circuit current is higher or where a single potential is needed.

Selection checklist for 1021500000

  • Number of points: each WDK block gives four connections on two levels.
  • Voltage: the rating is 400 V, lower than the 800 V of WDU 2.5.
  • Cabinet depth: 63 mm including rail.
  • End cover plate (required) and end stops.
  • Marking system for both levels.

Installation and maintenance of WDK 2.5

Mount on TS 35 rail, add the end cover plate, and wire both levels with ferruled conductors. Use a 0.6 x 3.5 mm blade and check torque. Because the lower level is partly hidden by the upper one, test the connections before closing the cabinet and mark each level clearly.

When you order, think in whole blocks: a run of twenty WDK blocks gives eighty connection points on two levels, and each block needs its own marker pair. Add end stops on both sides and one end cover plate per run, and keep a few spare blocks for later additions, since a fully wired double-level run is difficult to extend in the middle.

Typical applications in Oman and the GCC

Double-level terminals are used for instrument and signal wiring in marshalling cabinets, remote I/O boxes and junction boxes at oil and gas sites, desalination plants and substations. They are chosen when the rail length is the limiting factor, which is common in compact skid-mounted panels.

Information to send with an RFQ for 1021500000

  • Exact order number 1021500000 (WDK 2.5) and the quantity, including spares or packs.
  • Number of blocks and end plates needed.
  • Voltage and current of the circuits wired to the terminal.
  • Marking and cross-connection requirements.
  • Delivery location (Muscat, Sohar, Salalah or elsewhere in the GCC) and the date you need the goods.
  • Any documents you need with the quotation, such as the datasheet or a compliance statement.

Storage, handling and spares for the Weidmuller 1021500000

Keep Weidmuller 1021500000 units in their original packaging until they are mounted. Store them indoors in a dry, dust-free room, away from direct sun and condensation. Panel shops in Oman and the GCC often hold stock in warehouses that get very hot in summer, so check that storage temperature stays within the limits given in the manufacturer datasheet.

  • Check the label and order code on every unit against the drawing before it goes into the panel.
  • Use the correct tool and tightening torque for the terminals, as given in the instructions supplied with the product.
  • Keep a small number of spare units for each rating used on site, so that a failed or damaged part can be replaced without waiting for a new shipment.
  • Record the order code in the panel documentation and the as-built drawings, so that maintenance teams can reorder the same part later.

When you plan spares for a project, group the Weidmuller 1021500000 with the other parts of the same panel in one RFQ. This keeps delivery dates aligned and makes it easier to confirm stock for the whole bill of materials at once.

Documents and quotation

The manufacturer data sheet for 1021500000 is attached on this page. It lists the ordering data, approvals, ratings and drawings, so please check its notes against your design before you order.

To request a quotation, send order number 1021500000, the quantity and your delivery location. Seven Star LLC is an independent supplier in Muscat and is not affiliated with the manufacturer; we will confirm availability and lead time for your order.

Datasheets & Documents
  • PDF Datasheet Weidmüller WDK 2.5 Datasheet Download
Reviews (0)

Reviews

There are no reviews yet.

How would you rate this product?

It takes about 10 seconds — just tap a star. Your email is never published.

About brand

Weidmüller is a German family-owned maker of electrical connection and industrial electronics products, headquartered in Detmold. The company dates from 1850 and was re-established in Detmold in 1948; it specialised in terminal blocks from the 1940s onward. Weidmüller makes Klippon terminal blocks, power supplies, remote I/O and enclosures, and reported over one billion euros in revenue in 2023.

Seven Star LLC lists Weidmüller PRO MAX power supplies and SAK terminal blocks, and supplies Weidmüller components to panel shops and plants in Oman and the GCC.

Weidmüller company profile

Founded 1850, Germany
Headquarters Detmold, Germany (since 1948)
Ownership Family-owned
Revenue Over €1 billion (2023)
Product families Klippon Connect terminal blocks, PRO MAX and PRO TOP power supplies, u-remote I/O and fieldbus couplers, Klippon enclosures, connectors and tools

Milestones

  • 1850: Weidmüller is founded.
  • 1948: The company is re-established in Detmold.

Weidmüller products listed here

The listed power supplies are DIN rail switch-mode units with 24 V DC output: a PRO MAX single-phase unit rated 180 W and 7.5 A (85 to 277 V AC input), and a PRO MAX3 three-phase unit rated 240 W and 10 A (320 to 575 V AC input). The SAK series is the screw clamp feed-through terminal block family found in many existing panels. Weidmüller now flags several SAK types as being phased out and names a replacement for some of them.

Weidmüller products we list

Family Examples
Power Modules Weidmuller PRO MAX 180W 24V 7.5A DIN Rai…, Weidmuller PRO MAX3 240W 24V 10A Three-P…
Switchgear, Enclosures & Distribution Weidmuller Klippon Connect SAK Terminal…
PLC & I/O Cards Weidmuller UR20-FBC-PN-IRT-V2 u-remote P…

Ordering Weidmüller parts: what we need

Weidmüller identifies every item by a ten-digit order number, and that number is the surest way to quote. Without it, send the type printed on the part. For power supplies add input voltage and phases, output voltage and current. For terminal blocks add the conductor cross-section, color, and the end plates, cross-connections and markers you need, since accessories are specific to each series.

Facts checked against Weidmüller milestone lists and distributor profiles, October 2026.

FAQ

Questions about the Weidmuller WDK 2.5 Double-Level Terminal Block

Answers from our engineering team on installation, compatibility and integration.

01What is 1021500000?
It is the Weidmuller WDK 2.5 double-level terminal block with screw connection, four connections and two levels, rated 400 V and 2.5 mm².
02Are the two levels connected?
No. The data sheet states that the levels are not cross-connected internally, so each level carries its own potential. Cross-connection is possible by screw where needed.
03What are the hazardous-area ratings of WDK 2.5?
The data sheet gives Ex eb II C Gb marking with 275 V and 21 A under the ATEX and IECEx entries. Use those figures instead of the normal ratings for such wiring.
04How deep is the WDK 2.5?
It is 63 mm deep including the rail and 69.5 mm high. Check cabinet depth and door clearance before choosing a double-level block.
05How many pieces per pack?
The data sheet lists 100 pieces per pack for 1021500000. Tell us how many blocks you need and we will quote.