Brand:

Weidmuller WPE 2.5 PE Terminal Block

Description

Weidmuller WPE 2.5 PE terminal, order no. 1010000000

1010000000 is the Weidmuller WPE 2.5 protective-earth terminal in green/yellow with two screw clamping points, one level and a foot that contacts the TS 35 mounting rail. It is made of Wemid insulating material with a UL 94 V-0 rating, and the datasheet lists increased-safety marking Ex eb II C Gb. Seven Star LLC supplies 1010000000 in Oman and the GCC as an independent supplier in Muscat; the pack quantity listed is 100 pieces.

A PE terminal differs from a feed-through terminal because it bonds the connected conductors to the metal rail, giving the cabinet a continuous protective-earth path. In small panels the WPE 2.5 serves signal cable screens, field device earths and the local earth of 24 V circuits, and its 5.1 mm width matches the WDU 2.5 beside it.

What the type WPE 2.5 means

Element Value Meaning
WPE Series Protective-earth terminal with screw connection
2.5 2.5 mm² Rated conductor cross-section
Colour Green/yellow Standard colour for protective-earth conductors
Order no. 1010000000 Use for purchasing

Technical specifications for 1010000000

Parameter Specification
Manufacturer / part number Weidmuller / 1010000000 (type WPE 2.5)
Version PE terminal, screw connection, green/yellow, 2 connections, 1 level, TS 35
Rated cross-section 2.5 mm²
Contact resistance (IEC 60947-7) 1.33 mΩ
Power loss (IEC 60947-7) 0.00 W
Clamping range 0.05 mm² to 4 mm²
Stripping length 10 mm
Tightening torque 0.4 Nm to 0.6 Nm
Clamping screw / blade M 2.5 / 0.6 x 3.5 mm
Width 5.1 mm
Height 60 mm
Depth including rail 47 mm
Net weight 16.22 g

Earth bonding function of 1010000000

The terminal has a PE function and a PE connection to the rail; it does not have an N or PEN function. Its job is to connect protective conductors from field devices, cable screens and cabinet components to a single earth path. The data sheet gives a contact resistance of 1.33 mΩ, which shows how little voltage drop the clamp adds to the earth path. The rated cross-section is 2.5 mm² and the clamping range runs from 0.05 mm² to 4 mm².

Because the terminal is a protective part, it is not rated by nominal current like a feed-through terminal; instead the cross-section of the earth conductor must meet your panel standard. Connect one conductor per clamping point where the standard demands it, and keep the rail itself bonded to the cabinet frame with a short, sized conductor.

Related terminals and neighbouring sizes of 1010000000

The WPE family is sized to match the WDU feed-through series: WPE 2.5 (1010000000) pairs with WDU 2.5 (1020000000), and WPE 4 (1010100000) with WDU 4 (1020100000). Using the matching size keeps conductors, cross-connectors and marking systems consistent along the rail. For a multi-level layout use WDK 2.5 (1021500000), and for current-transformer circuits see WTL 6/3 (1018800000).

Earthing practice around WPE 2.5

Group the PE terminals at the entry side of the cable bundle so that each cable screen or protective conductor reaches earth with the shortest possible run. Keep green/yellow terminals together and label them with the cable number, which saves time at inspection. For WPE 2.5 the rated cross-section is 2.5 mm² and the clamping range reaches 4 mm², so conductors larger than that need a different terminal size or a dedicated earth bar.

Earth continuity should be measured at commissioning with a low-resistance tester, and the readings kept in the panel documentation. A second reading after the first months of operation shows whether vibration or thermal cycling has loosened any connection.

Selection checklist for 1010000000

  • Earth conductor size against 2.5 mm² rated and 4 mm² maximum clamping.
  • Rail type: the terminal is made for TS 35.
  • Whether an end cover plate is used (required according to the data sheet) and end stops.
  • Quantity: packs of 100 pieces.
  • Panel standard for earth-bonding spacing and colour marking.

Installation and maintenance of WPE 2.5

Fix the terminal to the rail so that the foot makes a firm metal contact; the data sheet notes that the terminal is locked by its screw. Use 0.6 x 3.5 mm at 0.4 Nm to 0.6 Nm torque and strip 10 mm of insulation. At every maintenance shutdown, check torque on PE terminals and that paint or corrosion has not formed a barrier under the rail, which is a common cause of high earth resistance in coastal sites.

Typical applications in Oman and the GCC

PE terminals are fitted in every control cabinet, junction box and marshalling panel. In Oman and the GCC they are needed in field junction boxes exposed to heat and humidity, in substations and switch rooms, and in desalination and petrochemical control rooms where earth integrity must be proven at commissioning and during inspections.

Information to send with an RFQ for 1010000000

  • Exact order number 1010000000 (WPE 2.5) and the quantity, including spares or packs.
  • Number of PE terminals and conductor sizes.
  • Related feed-through terminals and end plates needed.
  • Panel standard that applies to your project.
  • Delivery location (Muscat, Sohar, Salalah or elsewhere in the GCC) and the date you need the goods.
  • Any documents you need with the quotation, such as the datasheet or a compliance statement.

Storage, handling and spares for the Weidmuller 1010000000

Keep Weidmuller 1010000000 units in their original packaging until they are mounted. Store them indoors in a dry, dust-free room, away from direct sun and condensation. Panel shops in Oman and the GCC often hold stock in warehouses that get very hot in summer, so check that storage temperature stays within the limits given in the manufacturer datasheet.

  • Check the label and order code on every unit against the drawing before it goes into the panel.
  • Use the correct tool and tightening torque for the terminals, as given in the instructions supplied with the product.
  • Keep a small number of spare units for each rating used on site, so that a failed or damaged part can be replaced without waiting for a new shipment.
  • Record the order code in the panel documentation and the as-built drawings, so that maintenance teams can reorder the same part later.

When you plan spares for a project, group the Weidmuller 1010000000 with the other parts of the same panel in one RFQ. This keeps delivery dates aligned and makes it easier to confirm stock for the whole bill of materials at once.

Documents and quotation

The manufacturer data sheet for 1010000000 is attached on this page. It lists the ordering data, approvals, ratings and drawings, so please check its notes against your design before you order.

To request a quotation, send order number 1010000000, the quantity and your delivery location. Seven Star LLC is an independent supplier in Muscat and is not affiliated with the manufacturer; we will confirm availability and lead time for your order.

Other Models in the Weidmuller Wpe Terminal Range

Seven Star LLC supplies models from the Weidmuller Wpe Terminal range in Oman and the GCC. Compare the related models below and request a quote for the one that matches your application.

ModelCategory
Weidmuller WPE 2.5 PE Terminal BlockAutomation AccessoriesYou are viewing this model
Weidmuller WPE 4 PE Terminal BlockAutomation AccessoriesView details
Datasheets & Documents
  • PDF Datasheet Weidmüller WPE 2.5 Datasheet Download
Reviews (0)

Reviews

There are no reviews yet.

How would you rate this product?

It takes about 10 seconds — just tap a star. Your email is never published.

About brand

Weidmüller is a German family-owned maker of electrical connection and industrial electronics products, headquartered in Detmold. The company dates from 1850 and was re-established in Detmold in 1948; it specialised in terminal blocks from the 1940s onward. Weidmüller makes Klippon terminal blocks, power supplies, remote I/O and enclosures, and reported over one billion euros in revenue in 2023.

Seven Star LLC lists Weidmüller PRO MAX power supplies and SAK terminal blocks, and supplies Weidmüller components to panel shops and plants in Oman and the GCC.

Weidmüller company profile

Founded 1850, Germany
Headquarters Detmold, Germany (since 1948)
Ownership Family-owned
Revenue Over €1 billion (2023)
Product families Klippon Connect terminal blocks, PRO MAX and PRO TOP power supplies, u-remote I/O and fieldbus couplers, Klippon enclosures, connectors and tools

Milestones

  • 1850: Weidmüller is founded.
  • 1948: The company is re-established in Detmold.

Weidmüller products listed here

The listed power supplies are DIN rail switch-mode units with 24 V DC output: a PRO MAX single-phase unit rated 180 W and 7.5 A (85 to 277 V AC input), and a PRO MAX3 three-phase unit rated 240 W and 10 A (320 to 575 V AC input). The SAK series is the screw clamp feed-through terminal block family found in many existing panels. Weidmüller now flags several SAK types as being phased out and names a replacement for some of them.

Weidmüller products we list

Family Examples
Power Modules Weidmuller PRO MAX 180W 24V 7.5A DIN Rai…, Weidmuller PRO MAX3 240W 24V 10A Three-P…
Switchgear, Enclosures & Distribution Weidmuller Klippon Connect SAK Terminal…
PLC & I/O Cards Weidmuller UR20-FBC-PN-IRT-V2 u-remote P…

Ordering Weidmüller parts: what we need

Weidmüller identifies every item by a ten-digit order number, and that number is the surest way to quote. Without it, send the type printed on the part. For power supplies add input voltage and phases, output voltage and current. For terminal blocks add the conductor cross-section, color, and the end plates, cross-connections and markers you need, since accessories are specific to each series.

Facts checked against Weidmüller milestone lists and distributor profiles, October 2026.

FAQ

Questions about the Weidmuller WPE 2.5 PE Terminal Block

Answers from our engineering team on installation, compatibility and integration.

01What is 1010000000?
It is the Weidmuller WPE 2.5 PE terminal in green/yellow with screw connection for TS 35 rail. It bonds earth conductors to the rail.
02Does the WPE terminal carry nominal current?
No current rating is listed because it is a protective-earth terminal. The cross-section of the earth conductor must meet your standard, and the terminal accepts 0.05 mm² to 4 mm².
03What torque applies to WPE 2.5?
The data sheet gives 0.4 Nm to 0.6 Nm on the M 2.5 clamping screw. Use a 0.6 x 3.5 mm blade screwdriver and check torque during maintenance.
04Is an end cover plate needed?
Yes, the data sheet lists an end cover plate as required. Order it with the terminals, together with end stops for the rail.
05How many terminals are in a pack?
The data sheet gives a pack quantity of 100 pieces for 1010000000. Tell us the number you need and we will quote accordingly.