- Automation & ControlView all 2,473 products
- Automation Accessories
- AC Drives
- PLC & I/O Cards
- Industrial Communications
- Vibration Monitoring
- Controllers & Data Acquisition
- Isolator & Barrier
- CCTV & Security
- Motor Soft Starters
- Encoders
- Safety Switches & Guard Locking
- HMI Displays
- Pneumatic Cylinders
- Servo Drives
- Industrial Computers
- Machine Vision
- Automation Software
- Robotics
Brand: Pepperl+Fuchs
Pepperl+Fuchs Tab-Ex 05 DZ1 WWAN Hazardous Area Tablet
Description
Overview
Pepperl+Fuchs Tab-Ex 05 DZ1 WWAN is an ATEX and IECEx-certified, Zone 1/21 rugged Android tablet computer purpose-built for field technicians, HSE inspectors, and operations personnel who must carry a connected computing device directly into a classified hazardous area. Built by Pepperl+Fuchs through its Ecom Instruments product line, the Pepperl+Fuchs Tab-Ex 05 DZ1 family combines an 8-inch WUXGA touchscreen, an octa-core Android platform, and an intrinsically safe / flameproof enclosure so that plant staff can view P&IDs, log inspection data, run CMMS and permit-to-work applications, and communicate over cellular data without leaving the classified zone or waiting for a hot-work permit to use a standard tablet.
Facilities in Muscat, Sohar, and Salalah that operate under ATEX or IECEx hazardous-area classification schemes can source this tablet through Seven Star LLC with confidence that the unit, its accessories, and its documentation are authentic and traceable to the manufacturer.
Operating Principle
The Pepperl+Fuchs Tab-Ex 05 DZ1 achieves its Zone 1/21 (Division 1) rating through a combination of explosion protection concepts rather than a single technique. The main housing and battery compartment use flameproof enclosure (Ex d) construction, which allows an internal spark or short circuit to occur without the resulting flame front reaching the surrounding explosive atmosphere, while the touchscreen and low-energy interface circuits are protected using intrinsic safety (Ex ia), limiting the electrical energy available at the exposed surface to a level too low to ignite a flammable gas or dust mixture. This dual approach is what allows a full capacitive touchscreen, cameras, and radios to function normally on a device that is still safe to carry into a Zone 1 gas atmosphere or Zone 21 combustible dust area.
Operationally, the tablet behaves like a standard rugged Android device once the housing and thermal design constraints are accounted for: an Exynos octa-core processor runs Android natively, supporting the same enterprise mobility management (EMM), barcode/RFID scanning, and line-of-business apps used on non-hazardous-area tablets elsewhere in the plant. The practical consequence for the end user is a single device that removes the need to exit the classified area to consult documentation, log a reading, or make a WWAN cellular call, cutting round-trip walking time during inspection rounds and reducing the number of gas-free hot-work permits required purely to bring a computing device on site.
Engineering Design of the Pepperl+Fuchs Tab-Ex 05 DZ1
Physically, the Pepperl+Fuchs Tab-Ex 05 DZ1 is built around an 8-inch WUXGA (1920 x 1200) display protected by a reinforced glass and rubberized bumper frame, with a rear housing manufactured to meet IP68 ingress protection per EN/IEC 60529 and MIL-STD-810H shock, vibration, and drop test requirements. Physical navigation keys sit beneath the display for use with wet fingers or in gloved-hand operation, and the enclosure is sized and weighted to be used single-handed or mounted in a vehicle/wall dock for control-room and workshop use outside the classified area.
On the connectivity and interface side, the unit is equipped with a high-capacity Li-ion battery, a front and rear camera pairing for inspection photo documentation, and a full complement of wireless radios including WiFi, Bluetooth, satellite positioning, and — in the WWAN configuration covered here — an integrated cellular modem supporting LTE and 5G data services, removing the need for a separate WiFi access point inside the hazardous area. Charging and data transfer are handled through a sealed dock/USB interface rather than exposed port, preserving the enclosure’s ingress rating, and the tablet accepts a range of Ecom/Pepperl+Fuchs-approved mounting brackets, carrying straps, and desktop charging docks for both field and control-room deployment.
Key Features
The Pepperl+Fuchs Tab-Ex 05 DZ1 WWAN was engineered around the day-to-day realities of hazardous-area field work, and its feature set reflects that focus. Choosing the Pepperl+Fuchs Tab-Ex 05 over a consumer tablet gives plant teams a single certified device for both connectivity and compliance.
- Certified for use in ATEX/IECEx Zone 1/21 and North American Division 1 hazardous locations, covering gas and combustible dust atmospheres in a single device.
- Integrated WWAN cellular modem with LTE (4G) and 5G data support, giving field crews connectivity inside the classified area without relying on local WiFi infrastructure.
- 8-inch WUXGA (1920 x 1200) capacitive touchscreen, usable with gloves and in wet conditions, for clear viewing of P&IDs, work instructions, and inspection forms.
- Octa-core Exynos processor with 6 GB RAM and 128 GB of expandable UFS storage, providing enough headroom for CMMS, EMM-managed, and barcode/RFID scanning applications.
- IP68 ingress protection rated per EN/IEC 60529, combined with MIL-STD-810H shock and vibration testing for reliable operation in dusty, wet, and physically demanding plant environments.
- High-capacity Li-ion battery rated for up to a full working shift, reducing the need to leave the hazardous area mid-shift for charging.
- Integrated front and rear cameras for on-the-spot inspection photo documentation and defect reporting directly from the field.
- Full Android enterprise mobility support, including GPS/GNSS positioning, Bluetooth, and NFC, so the tablet integrates with existing digital work-permit, asset-tagging, and fleet-management systems.
Industrial Applications
Hazardous-area tablets of this type are specified wherever a plant needs its field workforce to carry a full computing device into a classified zone rather than relying on paper checklists or a separate non-classified control room terminal. In Oman’s oil and gas upstream and midstream operations, HSE and operations teams use Zone 1/21-rated tablets such as the Pepperl+Fuchs Tab-Ex 05 DZ1 WWAN to complete digital permit-to-work sign-offs, log gas-detector and rotating-equipment readings, and pull up live P&IDs during turnarounds, all without stepping outside the classified boundary. Refineries and gas-processing plants in the Sohar and Salalah free zones, along with LNG and petrochemical facilities elsewhere in the GCC, rely on the same class of device for inspection rounds, corrosion-under-insulation surveys, and mobile CMMS work-order closure in areas where a consumer-grade tablet would represent an ignition risk.
Working closely with plant engineers in the region, Seven Star LLC distributes the Pepperl+Fuchs Tab-Ex 05 DZ1 WWAN to EPC contractors, plant operators, and instrumentation integrators across the Sultanate of Oman, Muscat, and the wider GCC, supporting projects in oil and gas, power generation, water and desalination, and chemical processing where a certified, connected, ruggedized computing platform is a project or insurance requirement rather than a convenience. Local technical support with selection means facilities can standardize their mobile workforce on a single certified device rather than mixing uncertified consumer tablets with paper-based fallback procedures.
Technical Specifications
The table below summarizes the key specifications for the Pepperl+Fuchs Tab-Ex 05 DZ1 WWAN, based on the TAB-EX05-DZ1-WWANEUR-CN1000 reference configuration; procurement teams evaluating the Pepperl+Fuchs Tab-Ex 05 against other hazardous-area tablets should confirm the exact WWAN carrier-band variant needed for their region.
| Parameter | Specification |
|---|---|
| Model | Pepperl+Fuchs Tab-Ex 05 DZ1 WWAN (TAB-EX05-DZ1-WWANEUR-CN1000 reference configuration) |
| Hazardous Area Certification | ATEX/IECEx II 2G Ex db ia IIC T6 Gb, II 2D Ex tb ia IIIC T80°C Db – Zone 1/21, Division 1 |
| Display | 8 in (20.31 cm) WUXGA capacitive touchscreen, 1920 x 1200 |
| Operating System | Android™ 15 |
| Processor | Exynos 1380 (S5E8835) octa-core, 4 x 2.4 GHz + 4 x 2.0 GHz |
| Memory / Storage | 6 GB LPDDR4X RAM, 128 GB UFS internal storage, expandable via microSD up to 1 TB |
| Cellular / WWAN | Integrated LTE (4G) and 5G modem, multi-band |
| Wireless | WiFi 802.11 a/b/g, WiFi 4/5/6; Bluetooth® 5.3; GPS, GLONASS, BeiDou, Galileo; NFC |
| Cameras | 13 MP rear (autofocus, 8x digital zoom), 5 MP front; UHD 4K video @ 30 fps |
| Battery | Li-ion 3.8 V, 5050 mAh, 18.87 Wh; up to 14 h operating duration |
| Ingress Protection | IP68 per EN/IEC 60529 |
| Ruggedness | MIL-STD-810H tested for shock, vibration, and drop |
| Operating Temperature | -20 °C to +55 °C |
| Dimensions (W x H x D) | 161.5 mm x 262.75 nm x 25.75 mm |
| Weight | Approx. 1122 g |
Request a Quote for Pepperl+Fuchs Tab-Ex 05
Facility engineers and procurement teams in Oman and across the GCC can submit a formal RFQ to Seven Star LLC for the Pepperl+Fuchs Tab-Ex 05 DZ1 WWAN, request the manufacturer’s technical datasheet, and confirm current availability and lead times. With fast quotation turnaround and technical support, our instrumentation division can also advise on the correct DZ1/DZ2 zone rating, WWAN carrier-band configuration, and mounting/charging accessories for your specific plant deployment, and can provide technical support for every unit supplied.
Browse the full Pepperl+Fuchs range or see more Industrial Computer products supplied by Seven Star LLC in Oman and the GCC.
See also: Pepperl+Fuchs R2000 2-D LiDAR Laser Scanner.
Datasheets & Documents
- Brochure Pepperl+Fuchs Tab-Ex 05 Brochure Download
Reviews (0)
How would you rate this product? Cancel reply
About brand
Pepperl+Fuchs is a German manufacturer of industrial sensors and explosion protection equipment, founded in 1945 in Mannheim by Walter Pepperl and Ludwig Fuchs as a radio repair shop. Defective transformers led them into manufacturing, and the company developed its first proximity switch in the late 1950s. Pepperl+Fuchs is headquartered in Mannheim and is a pioneer of intrinsically safe electrical equipment for hazardous areas.
Seven Star LLC lists Pepperl+Fuchs sensors, isolated barriers, power supplies and hazardous-area mobile devices, and supplies them to instrument and automation teams in Oman by exact model designation.
Pepperl+Fuchs company profile
| Founded | 1945, Mannheim-Sandhofen, Germany, by Walter Pepperl and Ludwig Fuchs |
|---|---|
| Headquarters | Mannheim, Germany |
| Ownership | Privately owned (Pepperl+Fuchs SE) |
| Origins | Radio repair workshop that began making replacement transformers |
| Product families | Inductive, capacitive, ultrasonic and photoelectric sensors, rotary encoders, R2000 LiDAR scanners, KFD and HiC isolated barriers, Zener barriers, remote I/O, purge and pressurization systems, Ex-rated enclosures |
Milestones
- 1945: Walter Pepperl and Ludwig Fuchs open their radio repair shop in Mannheim.
- 1958: The first proximity switch is developed (some company sources say 1959).
Pepperl+Fuchs product families on this page
On the interface side there are two systems. The K-System mounts on DIN rail and is represented here by the KFD2-UT2-Ex2 universal temperature converter. The H-System plugs into termination boards and is represented by the HiD2030 SMART transmitter power supply with HART. The PS1000-A6-24.20 is a 24 VDC, 20 A power supply for cabinets. Sensors listed include the NJ2-12GK-SN NAMUR inductive sensor, the R101 retro-reflective photoelectric sensor and the R2000 2-D LiDAR scanner. For field staff there are the Tab-Ex 05 DZ1 tablet for Zone 1/21 areas and the Smart-Ex 03 DZ2 smartphone for Zone 2/22 and Division 2 areas.
Where Pepperl+Fuchs equipment is used
Isolated barriers sit between field instruments in Zone 0 or Zone 1 and the DCS or safety system in refineries, gas plants and chemical works. NAMUR sensors report valve position and machine states in classified areas. Photoelectric sensors and LiDAR scanners work in conveying, packaging, warehousing and vehicle guidance. Ex-rated tablets and phones are carried on operator rounds and maintenance jobs.
Pepperl+Fuchs products we list
Ordering Pepperl+Fuchs parts: what we need
Send the complete model designation as printed on the device, including every suffix; a single letter can change the supply voltage or the output type. Add the part number if the label shows one. For barriers, tell us the field device and signal type, the number of channels and whether the safety loop needs a SIL-assessed module. For mobile devices, state the zone or division and the regional radio version.
Facts checked against Pepperl+Fuchs's own chronicle pages, October 2026.
Browse Pepperl+Fuchs products by category: Sensors & Transmitters, Industrial Computer, Isolator & Barrier, Power Modules.
FAQ
Questions about the Pepperl+Fuchs Tab-Ex 05 DZ1 WWAN Hazardous Area
Answers from our engineering team on installation, compatibility and integration.
01What hazardous areas is the Tab-Ex 05 DZ1 WWAN certified for?
The Tab-Ex 05 DZ1 WWAN is ATEX and IECEx certified for Zone 1/21 gas and combustible dust atmospheres, and also meets North American Division 1 requirements, allowing use in most classified oil, gas, and chemical plant areas.
02Does the WWAN version require a separate SIM or carrier plan?
Yes, the WWAN configuration includes an integrated LTE/5G cellular modem that accepts a standard SIM card, so the customer arranges data connectivity through a local carrier plan for the deployment region.
03Can the tablet be used with gloves or in wet conditions?
Yes, the 8-inch WUXGA touchscreen supports glove and wet-finger operation, and the IP68-rated enclosure is designed for use in humid, dusty, or washdown plant environments.
04What Android version and management tools does it support?
The Tab-Ex 05 DZ1 runs Android natively and supports standard enterprise mobility management (EMM) platforms, so IT teams can deploy, update, and manage the tablet the same way as other Android Enterprise devices.
05Is Seven Star LLC an experienced supply partner for Pepperl+Fuchs products?
Yes, Seven Star LLC is an experienced supplier of Pepperl+Fuchs in Oman and the GCC, supplying hardware on request with local technical support.


















Reviews
There are no reviews yet.