ADLINK NuPRO-852DV PICMG 1.0 Single Board Computer

Overview

The ADLINK NuPRO-852DV is a full-size PICMG 1.0 single board computer (SBC) built for industrial PC chassis that use a passive backplane architecture. Supporting Intel Core 2 Duo processors up to 1066MHz FSB in an LGA775 socket, it provides embedded-grade processing power for industrial control and data-acquisition systems built around the PICMG passive-backplane standard.

As part of ADLINK’s NuPRO-850 series of PICMG single board computers, the NuPRO-852DV is engineered for long-term industrial deployment rather than consumer desktop use, with the reliability and extended lifecycle support that industrial automation systems require. Seven Star LLC supplies the ADLINK NuPRO-852DV to industrial PC and automation system integrators across Oman and the GCC.

Operating Principle

The NuPRO-852DV plugs into a PICMG 1.0 passive backplane slot, where it serves as the sole processing card for the entire chassis, driving all I/O and expansion cards installed in the backplane’s remaining slots through the PCI/ISA bus architecture the PICMG 1.0 standard defines. This passive-backplane approach isolates the processing hardware from the backplane itself, letting an integrator replace or upgrade the SBC without redesigning the entire chassis and I/O card set.

Engineering Design of the ADLINK NuPRO-852DV

The board is built around the Intel Q965 chipset paired with the ICH8 I/O controller hub, supporting dual-channel DDR2 memory at 667/533MHz for adequate memory bandwidth in industrial control applications. Connectivity includes a PCI Express x1 Gigabit Ethernet port, along with SATA and IDE storage interfaces for flexibility connecting both modern and legacy industrial storage devices. As a full-size PICMG 1.0 form factor board, it is designed to be a drop-in processing card for existing PICMG 1.0 passive-backplane chassis already deployed in the field.

Key Features

• PICMG 1.0 full-size single board computer form factor
• Supports Intel Core 2 Duo processors, LGA775 socket, up to 1066MHz FSB
• Intel Q965 + ICH8 chipset
• Dual-channel DDR2 667/533MHz memory support
• PCI Express x1 Gigabit Ethernet
• SATA and IDE storage interfaces
• Designed for passive-backplane industrial PC chassis
• Industrial-grade reliability for long-term deployment

Industrial Applications

The NuPRO-852DV is used to maintain and repair existing PICMG 1.0-based industrial PC systems across manufacturing, process, and control-room installations in Muscat, Sohar, and Salalah, where a passive-backplane architecture was originally specified for its modularity and long-term supportability. It remains a relevant replacement part for facilities that haven’t migrated away from PICMG 1.0-based industrial computing platforms.

Across the GCC’s manufacturing and process industries, the NuPRO-852DV supports continued operation of SCADA workstations, machine-vision processing units, and data-acquisition systems built on PICMG 1.0 chassis, letting facilities extend the service life of validated industrial PC installations without a full system replacement.

Technical Specifications

Identifying the Correct Board for a Replacement

PICMG 1.0 chassis stay in service for many years, and a failed processor card is often the one part that stops a whole control or test system. Before ordering a replacement, confirm the model printed on the board label and the ADLINK part number on the PCB, then compare it with the existing board. Note the installed processor, the amount and type of memory, the drives connected to SATA or IDE ports, and any BIOS settings the application depends on, such as boot order, legacy USB or ISA resource reservations.

• Check the backplane: the board must fit a PICMG 1.0 slot of the correct length.
• Record the existing BIOS configuration and, where possible, keep a disk image of the system drive.
• Check that the operating system and any legacy software support the chipset and network controller.
• Confirm the power supply can carry the processor load.

Installation and Commissioning

Power down the chassis, discharge static, and remove the old card with its bracket screws. Fit the processor, heat sink and memory to the replacement board before inserting it firmly into the system slot of the backplane. Reconnect storage cables, keyboard, display and network. On first power-up, enter the BIOS setup to load defaults, then restore the recorded settings. Boot the operating system and check the device manager for missing drivers, especially for the network controller and chipset. Finally, run the application under normal load for several hours while monitoring temperatures, to confirm that fans and airflow are adequate.

Maintenance and Troubleshooting

Many faults in older industrial PCs come from heat and dust rather than the board itself. Clean the chassis filters regularly, check fan operation, and replace the CMOS battery when BIOS settings are lost after shutdown. If the system does not start, test with a single memory module and minimal cards installed to isolate the fault. Intermittent network drops are often caused by cabling or switch issues, so check those before replacing the board.

Supporting Legacy Systems in Oman and the GCC

Plants in the region often keep PICMG-based computers running on test benches, turbine control panels, quality laboratories and packaging lines, where a full platform migration would require revalidation. A spare adlink nupro-852dv on the shelf is a simple way to reduce downtime risk for these systems.

Seven Star LLC sources industrial computing spares, including hard-to-find boards, for customers across Oman and the GCC. Send the board label details and a photo of the installed card, and we will confirm the match before supply.

Request a Quote for ADLINK NuPRO-852DV PICMG 1.0 Single Board Computer

Contact Seven Star LLC for a quotation and availability on the ADLINK NuPRO-852DV PICMG 1.0 single board computer across Oman and the GCC. Our team can help identify the correct SBC for your existing industrial PC chassis.

Browse the full ADLINK Technology range or see more Industrial Computer products supplied by Seven Star LLC in Oman and the GCC.