Brand:

Panametrics XMO2 Thermoparamagnetic Oxygen Transmitter

Description

Panametrics XMO2 overview

The Panametrics XMO2 is a smart thermoparamagnetic oxygen transmitter that measures oxygen in gases from 0.01 percent to 100 percent. The manufacturer positions it as a stable process oxygen analyzer that makes oxygen measurement as straightforward as a temperature or pressure measurement. It is built in a compact, rugged enclosure intended to be mounted at the measurement point, with weatherproof and explosion-proof, flameproof versions available.

The measuring principle uses the paramagnetic property of oxygen. In the dual-chamber, temperature-controlled cell, an oxygen-containing sample moves in a magnetic field and creates a magnetic wind that thermistor pairs detect. An onboard microprocessor converts this signal into oxygen concentration and compensates for background gas variations and, as an option, atmospheric pressure. There are no moving parts, so the sensor is insensitive to mounting position and vibration.

Key features of the Panametrics XMO2

  • Measurement ranges from 0.01 percent to 100 percent O2 in gases.
  • Explosion-proof and flameproof enclosure with weatherproof protection for remote mounting at the sample point.
  • Push-button single or dual gas calibration with software recalibration and no potentiometers.
  • Dual-bridge measurement circuit compensating for background gas composition.
  • Dual-chamber temperature-controlled cell resistant to contamination and flow fluctuation.
  • Computer-enhanced accuracy of 1 percent of span and linearity better than 0.5 percent of span.
  • Typical response time under 15 seconds.
  • 4 to 20 mA isolated output with programmable zero and span, plus RS232 digital output.

XMO2 technical specifications

Parameter Value
Accuracy Plus or minus 1 percent of span; plus or minus 2 percent for 0 to 1 percent range
Linearity Plus or minus 0.5 percent of span
Repeatability Plus or minus 0.2 percent of span
Zero stability Plus or minus 1 percent of span per month
Span stability Plus or minus 0.4 percent of span per month
Analog output 4 to 20 mA isolated, 800 ohm maximum load, field programmable
Digital output RS232, three-wire
Power 24 VDC plus or minus 4 VDC, 1.2 A maximum
Required sample flow Nominal 1.0 SCFH (500 cc/min); range 0.1 to 2.0 SCFH
Maximum pressure 20 psig (1.38 barg)
Ambient temperature -20 to 40 deg C standard cell at 45 deg C; -5 to 55 deg C optional cell at 60 deg C
Wetted materials 316 stainless steel, glass and Viton O-rings; options Hastelloy C276 and Chemraz
Process connections 1/4 in NPTF sample; 3/4 in NPTF conduit
Weatherproof unit size 9.53 x 5.71 in (242 x 145 mm)
Explosion-proof unit size 10.47 x 5.71 in (266 x 145 mm)
Weight 9.5 lb (4.3 kg)

Standard ranges include 0 to 1, 2, 5, 10, 21 and 25 percent, with 0 to 50, 0 to 100, 90 to 100 and 80 to 100 percent ranges requiring pressure compensation, according to the datasheet.

Typical applications in Oman and the GCC

The listed applications include inerting and blanketing of liquid storage tanks, reactor feed gases, centrifuge gases, catalyst regeneration, solvent recovery, landfill gas, wastewater digester gas and oxygen purity monitoring. In Oman and the GCC the XMO2 is relevant to tank blanketing in refineries and terminals, to biogas and digester gas safety, and to nitrogen generator or inert gas purity checks where an explosion-proof, field-mounted transmitter avoids long sample lines.

Selection and compatibility notes

Select the range that brackets normal and alarm oxygen levels, the enclosure (weatherproof or explosion-proof) and the cell temperature option for your climate. Wide-range and high-purity ranges need pressure compensation. The wetted material option should match the sample, especially for corrosive streams. The transmitter can also connect to Panametrics TMO2D, XDP and moisture.IQ units, which add signal compensation and automatic calibration.

Installation and commissioning

Mount the XMO2 near the tap, keep the sample at or below 20 psig, and set flow near 1.0 SCFH through a suitable flow control. Use the optional flame arrestor on explosion-proof units. Wire 24 VDC power and the four-wire cable, which is supplied at 10 ft as standard and up to 4000 ft for current output as an option. Calibrate using the push button or software with one or two reference gases.

Maintenance and service life

With no moving parts the main upkeep is sample conditioning: keep filters clean, avoid liquid carry-over and confirm zero and span at a suitable interval. Zero and span stability are specified per month, so many users check calibration periodically and after any change in background gas composition.

Related products and ordering notes

Related Panametrics oxygen instruments on this site include the oxy.IQ galvanic oxygen transmitter, which suits ppm-level oxygen. For the XMO2 RFQ, list the range, enclosure, cell temperature, wetted materials and cable length. Seven Star LLC is an independent supplier serving Oman and the GCC and is not affiliated with the manufacturer.

Quick answers about the XMO2

  • What principle does the XMO2 use? It uses a thermoparamagnetic cell in which oxygen movement in a magnetic field creates a magnetic wind sensed by thermistors.
  • What range does the XMO2 cover? It measures oxygen from 0.01 percent to 100 percent, with several selectable ranges such as 0 to 1, 0 to 5, 0 to 10 and 0 to 25 percent.
  • What power and output does the XMO2 need? It runs on 24 VDC plus or minus 4 VDC at 1.2 A maximum and gives an isolated 4 to 20 mA output plus RS232.

Documents and quotation

A manufacturer datasheet for the XMO2 is available from Seven Star LLC on request and is attached to this listing where provided. To receive a quotation, send the RFQ with the part number XMO2, the quantity required and your delivery location, together with any hazardous area, range or configuration details from your project specification.

Ordering Checklist for Panametrics XMO2

Before you request a quotation for the Panametrics XMO2, confirm the complete order code shown on the nameplate of the unit you are replacing, the supply voltage, and the process or signal ranges your system expects. If you are upgrading rather than replacing like for like, tell us the existing make and model so the mounting, wiring and connection details can be checked against the gas analyzer systems you already run. For multi-unit orders, list the quantity per site and the required delivery location in Oman or the wider GCC, so packing, documentation and lead time can be confirmed in one quotation instead of several follow-up emails.

Other Models in the Panametrics Oxygen Range

Seven Star LLC supplies models from the Panametrics Oxygen range in Oman and the GCC. Compare the related models below and request a quote for the one that matches your application.

ModelCategory
Panametrics XMO2 Thermoparamagnetic Oxygen TransmitterGas Analyzer SystemsYou are viewing this model
Panametrics oxy.IQ Two-Wire Oxygen TransmitterGas Analyzer SystemsView details
Datasheets & Documents
  • PDF Datasheet Panametrics XMO2 Thermoparamagnetic Oxygen Transmitter Datasheet Download
Reviews (0)

Reviews

There are no reviews yet.

How would you rate this product?

It takes about 10 seconds — just tap a star. Your email is never published.

About brand

Panametrics is an American maker of ultrasonic flowmeters and moisture, oxygen and gas analysers. It was founded in 1960 and was based in Waltham, Massachusetts, when GE bought it in 2002. It later became a Baker Hughes business, and since 1 January 2026 it has belonged to Crane Company. Its long-running site in Shannon, Ireland, opened in 1973.

Seven Star LLC lists Panametrics flowmeters and analyzers for buyers in Oman: DigitalFlow gas and flare meters, clamp-on and portable liquid meters, and trace moisture analyzers for natural gas and process gases. We are an independent supplier, so each inquiry is checked against the manufacturer's order string before a quotation goes out.

Panametrics company profile

Founded 1960, Massachusetts, USA
Main sites Billerica, Massachusetts, and Shannon, Ireland (since 1973)
Ownership Crane Company since 1 January 2026; previously GE (from 2002) and Baker Hughes
Key technology Transit-time ultrasonic flow measurement and aluminium oxide moisture sensing
Product families TransPort PT900 portable and DigitalFlow fixed ultrasonic flowmeters for liquid, gas and flare gas, aluminium oxide moisture probes and hygrometers, Aurora laser moisture analysers, XMO2 oxygen and XMTC thermal conductivity transmitters

Milestones

  • 1960: Panametrics is founded.
  • 1973: The Shannon, Ireland, site is established.
  • 2002: GE acquires Panametrics.
  • 2026: Crane Company completes its purchase of Baker Hughes' Precision Sensors & Instrumentation, including Panametrics.

Panametrics product families on this page

The listed items follow the manufacturer's own grouping:

  • Gas and flare flow: DigitalFlow GF868 flare gas meter, GM868 and XGM868i gas flow transmitters
  • Liquid flow: XMT1000 transmitter, AT600 AquaTrans clamp-on meter, TransPort PT900 portable meter
  • Moisture: moisture.IQ multichannel analyzer, HygroPro II aluminum oxide transmitter, Aurora TDLAS analyzer for natural gas

Older units may carry GE Panametrics or GE Sensing on the nameplate. They belong to the same product lines, and the model string is read the same way.

Where Panametrics flowmeters and moisture analyzers are used

Flare meters report flared volumes on production sites, refineries and LNG plants. Clamp-on and portable ultrasonic meters check water, hydrocarbon liquid and utility lines without cutting the pipe. Aluminum oxide and TDLAS moisture analyzers watch dehydration units, gas pipelines, hydrogen and industrial gas streams. The manufacturer also names chemical processing, energy and water and wastewater among its markets, which matches what GCC operators ask us for.

Panametrics products we list

Family Examples
Flowmeters AT600 AquaTrans Clamp-On Ultrasonic Wate…, DigitalFlow GM868 General-Purpose Gas Ul…, GF868 DigitalFlow Flare Gas Ultrasonic F…, PT900 TransPort Portable Ultrasonic Flow…, XGM868i DigitalFlow Gas Ultrasonic Flow…, XMT1000 Liquid Flow Ultrasonic Transmitter
Gas Analyzer Systems Aurora TDLAS Moisture Analyzer for Natur…, HygroPro II Aluminum Oxide Moisture Tran…, moisture.IQ Multichannel Trace Moisture…

Ordering Panametrics equipment: what we need

A Panametrics model is a long configuration string, and the transducers or probes are ordered separately. Please send the full model and serial number of the electronics, the transducer or moisture probe part number, pipe size, schedule and material, fluid, pressure and temperature, flow range, hazardous area approval and output or protocol. For a flare meter add the flare gas composition range and velocity range. For moisture, give the dew point range and whether sample system components are required.

Facts checked against GE's 2002 acquisition release, Crane Company's January 2026 completion release and Irish press, October 2026.

FAQ

Questions about the Panametrics XMO2 Thermoparamagnetic Oxygen

Answers from our engineering team on installation, compatibility and integration.

01What principle does the XMO2 use?
It uses a thermoparamagnetic cell in which oxygen movement in a magnetic field creates a magnetic wind sensed by thermistors.
02What range does the XMO2 cover?
It measures oxygen from 0.01 percent to 100 percent, with several selectable ranges such as 0 to 1, 0 to 5, 0 to 10 and 0 to 25 percent.
03What power and output does the XMO2 need?
It runs on 24 VDC plus or minus 4 VDC at 1.2 A maximum and gives an isolated 4 to 20 mA output plus RS232.
04What sample flow does the XMO2 need?
The nominal flow is 1.0 SCFH (500 cc/min), with an allowed range of 0.1 to 2.0 SCFH.
05Is the XMO2 available in explosion-proof form?
Yes. Both weatherproof and explosion-proof, flameproof versions are offered, with an optional flame arrestor on explosion-proof units.