Brand:

ifm TA2502 Temperature Transmitter, Pt1000, -50 to 200 degC, G 1/2

Description

Short-stem temperature sensing: ifm TA2502

Many temperature sensors in plants are long dip-stem probes that need thermowells, but the ifm TA2502 has an installation length of only 30 mm. A Pt1000 element to DIN EN 60751 class A reads minus 50 to 200 degC and a built-in transmitter converts it to 4 to 20 mA, with IO-Link for parameters. The G 1/2 external thread with sealing cone is metal to metal, and the whole body is electropolished 316L stainless steel. The order description is TA-030CLER12- – /US.

Features

  • Pt1000 element, class A to DIN EN 60751, in a 30 mm stem.
  • Pressure rating 160 bar with a sealing-cone thread that needs no gasket.
  • Protection IP 67, IP 68 and IP 69K.
  • Analogue output 4 to 20 mA plus IO-Link, with a factory certificate available as a download.
  • 180.5 g and 128.8 mm length with 18.7 mm diameter.

TA2502 datasheet figures

Product type Temperature transmitter
Measuring range Minus 50 to 200 degC
Sensing element 1 x Pt1000 to DIN EN 60751, class A
Process connection G 1/2 external thread, sealing cone
Installation length EL 30 mm
Media Liquids and gases
Pressure rating 160 bar
Operating voltage 18 to 32 V DC (supply class 2 to cULus)
Outputs Analogue 4 to 20 mA, IO-Link (configurable)
Ambient temperature Minus 25 to 80 degC (medium temperature under 160 degC)
Protection IP 67, IP 68 and IP 69K
Dimensions / weight Diameter 18.7 mm, length 128.8 mm / 180.5 g
Materials Stainless steel 316L, PEI, FKM; wetted 316L electropolished
Tightening torque 30 to 50 Nm
Certificate Factory certificate available as download
MTTF 232 years

Read as running text, the manufacturer datasheet of the TA2502 states the following. Product type: Temperature transmitter. Measuring range: Minus 50 to 200 degC. Sensing element: 1 x Pt1000 to DIN EN 60751, class A. Process connection: G 1/2 external thread, sealing cone. Installation length EL: 30 mm. Media: Liquids and gases. Pressure rating: 160 bar. Operating voltage: 18 to 32 V DC (supply class 2 to cULus). Outputs: Analogue 4 to 20 mA, IO-Link (configurable). Ambient temperature: Minus 25 to 80 degC (medium temperature under 160 degC). Protection: IP 67, IP 68 and IP 69K. Dimensions / weight: Diameter 18.7 mm, length 128.8 mm / 180.5 g. Materials: Stainless steel 316L, PEI, FKM; wetted 316L electropolished. Tightening torque: 30 to 50 Nm. Certificate: Factory certificate available as download. MTTF: 232 years.

The short stem of the TA2502 has consequences for accuracy that deserve attention. With 30 mm installation length the tip is only part-way into a pipe, so heat conducted along the housing to the ambient air can influence the reading when the medium is far from ambient temperature. Insulating the pipe near the sensor reduces this error. The note in the datasheet that the ambient limit of 80 degC applies at medium temperatures below 160 degC also sets practical limits for installation near hot lines. The MS abbreviation in the remarks refers to the set measuring span, used in the accuracy statements, so the output scaling you select affects the stated deviation.

For the cabinet, the output signal of 4 to 20 mA fits standard analogue input cards, and the supply of 18 to 32 V DC is stated as supply class 2 to cULus, which matters if the panel is built to North American practice. IO-Link allows the span to be changed without opening anything, and the datasheet offers a factory certificate for download, useful when a quality system asks for evidence of the Pt1000 class.

Typical applications of TA2502

A short probe in a pipe elbow, a heat exchanger inlet or a tank wall measures the temperature of flowing liquids and gases in cooling, heating and CIP systems. Omani food, beverage and utility plants appreciate electropolished surfaces and IP 69K when hosing down. Because the stem is short, it suits pipes where the flow profile covers the tip, so use it in DN25 or larger lines or with an elbow to put the tip into the flow.

Selecting the TA2502

The TA2502 is unusual in this listing because it is the only temperature device and the only sensor with a 30 mm insertion. Compared with the pressure sensors, its pressure rating of 160 bar is higher than most PN sensors (up to 75 bar), but lower than the PN2271 (500 bar). If you need longer immersion for large tanks, look for another installation length rather than this variant.

Mounting

Fit into a G 1/2 port with the sealing cone seat and tighten to 30 to 50 Nm. Keep the housing away from sources of radiant heat; the datasheet states that at medium temperatures under 160 degC the ambient limit is 80 degC. Set the analogue span through IO-Link or use the default range.

Maintenance

Compare the output to a reference thermometer in a dry-block once a year. Download the factory certificate if the plant needs documented traceability.

Quote notes

Send TA2502 in the RFQ. Seven Star LLC is an independent supplier serving Oman and the GCC and is not affiliated with the manufacturer.

Selection Notes for the ifm TA2502

When comparing the ifm TA2502 with alternatives, start from the duty it must perform: the measured or controlled variable, the range and accuracy you need, the environment at the mounting point and the interface to your control system. Check the electrical and mechanical connections against the installed equipment, and confirm any hazardous-area or ingress-protection requirements for the location. If any point is unclear, send a photo of the nameplate and a short description of the application, and we will compare it with the ifm temperature transmitters range and confirm the correct order code before you commit.

Frequently asked questions about the TA2502

  • What does the ifm TA2502 measure? Temperature of liquids and gases from minus 50 to 200 degrees Celsius with a Pt1000 element to DIN EN 60751 class A.
  • What outputs does the TA2502 have? An analogue 4 to 20 mA signal and IO-Link, both configurable.
  • What process connection does the TA2502 use? A G 1/2 external thread with sealing cone, tightened to 30 to 50 Nm, with an installation length of 30 mm.
  • What pressure can the TA2502 withstand? The datasheet states a pressure rating of 160 bar.
  • How do I order the TA2502? Send the RFQ with part number TA2502, quantity and delivery location to Seven Star LLC.

Documents and quotation

This page carries the manufacturer datasheet of the TA2502. Please include part number TA2502, the quantity required and your destination in the RFQ so that we can confirm stock position and respond with a quotation.

Datasheets & Documents
  • PDF Datasheet ifm TA2502 Temperature Transmitter, Pt1000, -50 to 200 degC, G 1/2 Datasheet Download
Reviews (0)

Reviews

There are no reviews yet.

How would you rate this product?

It takes about 10 seconds — just tap a star. Your email is never published.

About brand

ifm is a German family-owned maker of sensors and automation products, founded in Essen in October 1969 by Robert Buck and Gerd Marhofer. Its first products were inductive proximity sensors sold under the efector name. ifm is still headquartered in Essen, and the founders' sons, Martin Buck and Michael Marhofer, have led it since 2001.

Seven Star LLC lists ifm position, distance and pressure sensors and supplies them by exact article number to plants and machine builders in Oman and the wider Gulf region.

ifm company profile

Founded 1969, Essen, Germany
Founders Robert Buck and Gerd Marhofer
Headquarters Essen, Germany
Ownership Family-owned
Product families Inductive and capacitive proximity sensors, PN pressure sensors, O1D laser distance sensors, flow and level sensors, IO-Link masters

Milestones

  • 1969: ifm is founded in Essen.
  • 2001: The founders' sons take over management.

ifm sensors listed on this page

ifm identifies every device with a short article number, and that number is what we order against. Three are listed here:

  • O1D100: laser distance sensor for position and distance measurement
  • PN7093: pressure sensor with local display
  • NG5021: inductive proximity sensor with NAMUR output

Other ifm inductive sensors, pressure sensors and connection cables can be quoted on request when you send the article number.

ifm products we list

Family Examples
Inductive Proximity Sensors NG5021 Inductive NAMUR Proximity Sensor
Laser Distance, LiDAR & Radar Sensors O1D100 Laser Distance Sensor
Pressure Instrumentation PN7093 Pressure Sensor with Display

Ordering ifm sensors: what we need

Send the six-character article number printed on the housing (two letters and four digits, or similar). If the label is worn, a photo plus the thread size, sensing range, output type and connector style is enough for us to check the part against ifm documentation. For NAMUR sensors, tell us which isolating amplifier is in the loop. Buyers in the GCC who need a successor for a discontinued article can send the old number and we will check the replacement the manufacturer names.

Facts checked against ifm's own 50-year chronicle (ifm.com), October 2026.

FAQ

Questions about the ifm TA2502 Temperature Transmitter, Pt1000, -50 to

Answers from our engineering team on installation, compatibility and integration.

01What does the ifm TA2502 measure?
Temperature of liquids and gases from minus 50 to 200 degrees Celsius with a Pt1000 element to DIN EN 60751 class A.
02What outputs does the TA2502 have?
An analogue 4 to 20 mA signal and IO-Link, both configurable.
03What process connection does the TA2502 use?
A G 1/2 external thread with sealing cone, tightened to 30 to 50 Nm, with an installation length of 30 mm.
04What pressure can the TA2502 withstand?
The datasheet states a pressure rating of 160 bar.
05How do I order the TA2502?
Send the RFQ with part number TA2502, quantity and delivery location to Seven Star LLC.