- Automation & ControlView all 2,612 products
- Automation Accessories
- AC Drives
- PLC & I/O Cards
- Industrial Communications
- Vibration Monitoring
- Controllers & Data Acquisition
- Isolator & Barrier
- Safety Switches & Guard Locking
- Motor Soft Starters
- CCTV & Security
- Encoders
- HMI Displays
- Pneumatic Cylinders
- Servo Drives
- Industrial Computers
- Machine Vision
- Automation Software
- Robotics
Brand: ifm
ifm O5P500 Retro-Reflective Sensor, Red Light, Teach, PNP
Description
ifm O5P500 Retro-Reflective Sensor, Red Light, Teach, PNP
The ifm O5P500 is a retro-reflective photoelectric sensor with a very long range for its housing class. It uses red light at 624 nm, is adjusted with teach buttons and can be programmed to light-on or dark-on. The PNP output carries 200 mA, the switching frequency is 2000 Hz and the supply is 10 to 36 V DC with a consumption of 20 mA. The connector can be rotated by 270 degrees.
The housing is 56 x 18.2 x 46.8 mm, protection is IP67 and the ambient range is -25 to 60 degrees Celsius. Seven Star LLC supplies the O5P500 in Oman and the GCC as an independent supplier in Muscat.
O5P500 technical specifications
The table lists the values published by the manufacturer for the O5P500. Where a parameter has several operating modes, the headline value is shown; the full parameter list is in the manufacturer documentation.
| Parameter | Specification |
|---|---|
| Manufacturer / part number | ifm electronic / O5P500 |
| Function principle | Retro-reflective sensor |
| Dimensions [mm] | 56 x 18.2 x 46.8 |
| Type of light | red light |
| Wave length [nm] | 624 |
| Max. light spot diameter [mm] | 250 |
| Operating voltage [V] | 10 to 36 DC ("supply class 2" to cULus) |
| Current consumption [mA] | 20 |
| Electrical design | PNP |
| Output function | light-on/dark-on mode (programmable) |
| Permanent current rating of switching output DC [mA] | 200 |
| Switching frequency DC [Hz] | 2000 |
| Ambient temperature [°C] | -25 to 60 |
| Protection | IP 67 |
| Weight [g] | 67.5 |
| Materials | housing: PA; bezel: stainless steel; operator interface: TPU |
| Connector | 1 x M12; coding: A; Contacts: 4 |
| MTTF [years] | 435 |
How the O5P500 works
The O5P500 is a retro-reflective sensor: it sends a red light beam (624 nm) toward a reflector and receives the beam returned by it. The sensor reports an object when the beam between sensor and reflector is interrupted, so detection does not depend on the colour of the object, though very shiny or transparent objects need care. Sensitivity is adjusted with teach buttons so the sensor can ignore dirt or haze on the reflector, and the output can be programmed as light-on or dark-on. The light spot is up to 250 mm in diameter at maximum distance, which gives tolerance to alignment drift on long runs.
Where the O5P500 fits and related parts
The O5P500 is the rectangular retro-reflective type; the OGP500 puts the same function into an M18 stainless tube with a smaller 200 mm spot. The O5C500 in the same housing evaluates colour. A background-suppression type such as the O8H200 needs no reflector.
Selection and ordering checklist for the O5P500
Work through the points below before you confirm the order, so that the O5P500 you receive is the one your machine or plant needs.
- Confirm the sensor-to-reflector distance
- Confirm that the object size is larger than the light spot requirements allow
- Choose light-on or dark-on
- Check the PNP output and 10 to 36 V DC supply
- Order a suitable reflector and bracket
The manufacturer lists this article under the type designation Retro-reflective sensor, O5P-FPKG/US100. The article number O5P500 is the reference to quote when ordering, and the type designation is useful for technicians who compare the label on an installed unit.
Installation, commissioning and maintenance
Align the sensor and the reflector so that the beam hits the reflector centre, then teach the sensitivity with a clear path. Check detection with the smallest object you must detect, tested at several points across the beam. Keep the reflector clean and fixed. The connector can be rotated by 270 degrees to point the cable toward the machine frame, and a rigid bracket reduces the need for realignment after vibration.
Typical applications in Oman and the GCC
Pallet and package detection on conveyors, door and gate monitoring and counting of boxes. In Oman and the GCC the long range suits wide loading bays and warehouse conveyors where a through-beam pair would need two cables.
Optical sensors on open conveyors and loading areas meet dust, sand and strong sunlight. Regular lens cleaning, a firm bracket and a check of the switching point after any mechanical change keep detection reliable.
O5P500 compared with related ifm types
The table places the O5P500 next to neighbouring types in the same application group, so you can see whether a sibling would suit the job better.
| Part number | Key characteristics | Note |
|---|---|---|
| O5C500 | Colour sensor, RGB LED, 15-19 mm, 2 kHz | Related type |
| O5P500 | Retro-reflective, red light, 250 mm spot, 2 kHz | This page |
| OGP500 | M18 stainless, retro-reflective, 200 mm spot, 80 C | Related type |
| O8H200 | Miniature, 3-15 mm, 4 mm spot, IO-Link | Related type |
| O5D100 | Compact distance sensor | Related type |
| O6H700 | Background suppression sensor | Related type |
| OGH580 | M18 stainless diffuse sensor | Related type |
Information to send with an RFQ for the O5P500
To prepare an accurate offer for the O5P500, please include the following with your enquiry:
- Distance between sensor and reflector
- Object size, transparency and surface
- Light-on or dark-on logic required
- Supply voltage and PNP input compatibility
- Reflector size and fixing bracket
Storage, handling and spares for the ifm O5P500
Keep ifm O5P500 units in their original packaging until they are mounted. Store them indoors in a dry, dust-free room, away from direct sun and condensation. Panel shops in Oman and the GCC often hold stock in warehouses that get very hot in summer, so check that storage temperature stays within the limits given in the manufacturer datasheet.
- Check the label and order code on every unit against the drawing before it goes into the panel.
- Use the correct tool and tightening torque for the terminals, as given in the instructions supplied with the product.
- Keep a small number of spare units for each rating used on site, so that a failed or damaged part can be replaced without waiting for a new shipment.
- Record the order code in the panel documentation and the as-built drawings, so that maintenance teams can reorder the same part later.
When you plan spares for a project, group the ifm O5P500 with the other parts of the same panel in one RFQ. This keeps delivery dates aligned and makes it easier to confirm stock for the whole bill of materials at once.
Documents and quotation
The official ifm data sheet for the O5P500 (document O5P500-00, English, issued 8 July 2025) is attached on this page as a PDF. It sets out the electrical data, the output function, the operating conditions, the approvals and the dimension drawing for this article. Check these values and the wiring diagram against your application before ordering, then send us the quantity and the delivery location for a quotation.
Seven Star LLC is an independent supplier in Muscat serving Oman and the GCC and is not affiliated with the manufacturer; the name ifm is used only to identify the product. Prices are not shown on the page, so send the part number, the quantity and the delivery location to receive a quotation.
Other Models in the Ifm61 Photo Range
Seven Star LLC supplies models from the Ifm61 Photo range in Oman and the GCC. Compare the related models below and request a quote for the one that matches your application.
| Model | Category | |
|---|---|---|
| ifm O5C500 Colour Sensor, RGB Light, Teach, 15-19 mm | Automation Accessories | View details |
| ifm O5P500 Retro-Reflective Sensor, Red Light, Teach, PNP | Automation Accessories | You are viewing this model |
Datasheets & Documents
- Datasheet ifm O5P500 Data Sheet (PDF) Download
Reviews (0)
How would you rate this product? Cancel reply
About brand
ifm is a German family-owned maker of sensors and automation products, founded in Essen in October 1969 by Robert Buck and Gerd Marhofer. Its first products were inductive proximity sensors sold under the efector name. ifm is still headquartered in Essen, and the founders' sons, Martin Buck and Michael Marhofer, have led it since 2001.
Seven Star LLC lists ifm position, distance and pressure sensors and supplies them by exact article number to plants and machine builders in Oman and the wider Gulf region.
ifm company profile
| Founded | 1969, Essen, Germany |
|---|---|
| Founders | Robert Buck and Gerd Marhofer |
| Headquarters | Essen, Germany |
| Ownership | Family-owned |
| Product families | Inductive and capacitive proximity sensors, PN pressure sensors, O1D laser distance sensors, flow and level sensors, IO-Link masters |
Milestones
- 1969: ifm is founded in Essen.
- 2001: The founders' sons take over management.
ifm sensors listed on this page
ifm identifies every device with a short article number, and that number is what we order against. Three are listed here:
- O1D100: laser distance sensor for position and distance measurement
- PN7093: pressure sensor with local display
- NG5021: inductive proximity sensor with NAMUR output
Other ifm inductive sensors, pressure sensors and connection cables can be quoted on request when you send the article number.
ifm products we list
Ordering ifm sensors: what we need
Send the six-character article number printed on the housing (two letters and four digits, or similar). If the label is worn, a photo plus the thread size, sensing range, output type and connector style is enough for us to check the part against ifm documentation. For NAMUR sensors, tell us which isolating amplifier is in the loop. Buyers in the GCC who need a successor for a discontinued article can send the old number and we will check the replacement the manufacturer names.
Facts checked against ifm's own 50-year chronicle (ifm.com), October 2026.
Browse ifm products by category: Sensors & Transmitters, Pressure Instrumentation.
FAQ
Questions about the ifm O5P500 Retro-Reflective Sensor, Red Light,
Answers from our engineering team on installation, compatibility and integration.
01What light does the ifm O5P500 use?
Red light with a wavelength of 624 nm. This is the value published by the manufacturer for the O5P500; confirm details before ordering.
02How is sensitivity set on the O5P500?
With teach buttons on the housing. This is the value published by the manufacturer for the O5P500; confirm details before ordering.
03What output does the O5P500 provide?
A PNP output, programmable light-on or dark-on, up to 200 mA.
04How fast does the O5P500 switch?
2000 Hz. This is the value published by the manufacturer for the O5P500; confirm details before ordering.
05Can the O5P500 connector be turned?
Yes, the connector can be rotated by 270 degrees.


















Reviews
There are no reviews yet.