- Automation & ControlView all 2,610 products
- Automation Accessories
- AC Drives
- PLC & I/O Cards
- Industrial Communications
- Vibration Monitoring
- Controllers & Data Acquisition
- Isolator & Barrier
- Safety Switches & Guard Locking
- Motor Soft Starters
- CCTV & Security
- Encoders
- HMI Displays
- Pneumatic Cylinders
- Servo Drives
- Industrial Computers
- Machine Vision
- Automation Software
- Robotics
Brand: ifm
ifm IIS207 Inductive Sensor M30, 22 mm Non-Flush, 2 LED
Description
ifm IIS207 Inductive Sensor M30, 22 mm Non-Flush, 2 LED
The ifm IIS207 is an M30 x 1.5 inductive sensor with a 70 mm brass housing and a non-flush sensing range of 22 mm. The operating distance is 0 to 17.82 mm, the switching frequency is 100 Hz and the output carries 100 mA. It can be wired in three-wire PNP/NPN or two-wire mode and an optical mounting and setting aid shows alignment with two LEDs.
The housing weighs about 118 g, is protected to IP67 and works from -25 to 70 degrees Celsius. Seven Star LLC supplies the ifm IIS207 in Oman and the GCC as an independent supplier in Muscat.
IIS207 technical specifications
The table lists the values published by the manufacturer for the IIS207. Where a parameter has several operating modes, the headline value is shown; the full parameter list is in the manufacturer documentation.
| Parameter | Specification |
|---|---|
| Manufacturer / part number | ifm electronic / IIS207 |
| Sensing range [mm] | 22 |
| Thread designation | M30 x 1.5 |
| Dimensions [mm] | M30 x 1.5 / L = 70 |
| Mounting | non-flush mountable |
| Real sensing range Sr [mm] | 22 ± 10 % |
| Operating distance [mm] | 0 to 17.82 |
| Hysteresis [% of Sr] | 1 to 20 |
| Operating voltage [V] | 10 to 30 DC |
| Current consumption [mA] | < 15 |
| Electrical design | PNP/NPN |
| Output function | normally open |
| Permanent current rating of switching output DC [mA] | 100 |
| Switching frequency DC [Hz] | 100 |
| Ambient temperature [°C] | -25 to 70 |
| Protection | IP 67 |
| Weight [g] | 117.9 |
| Materials | housing: brass white bronze coated; sensing face: PBT orange; LED window: PEI; lock nuts: brass white bronze coated |
| Connector | 1 x M12; coding: A; Contacts: 3, gold-plated |
| MTTF [years] | 1548 |
How the IIS207 works
An inductive proximity sensor such as the IIS207 generates a high-frequency magnetic field at its sensing face. When a metal target enters the field, eddy currents damp the oscillation, and the electronics switch the output. The real sensing range is stated for a standard steel target; other metals are detected at a shorter distance according to the correction factors in the table. No contact is made with the target, so there is no wear and the sensor is unaffected by dirt, oil or moisture on the target.
Where the IIS207 fits and related parts
The IIS207 is the long-range M30 type of the range; the IIS208 is a flush M30 version with a 15 mm range and a 50 mm body. Smaller versions are the IGS208 in M18 and the IFS200 in M12.
Selection and ordering checklist for the IIS207
Work through the points below before you confirm the order, so that the IIS207 you receive is the one your machine or plant needs.
- Confirm the M30 x 1.5 thread and 70 mm body
- Confirm non-flush mounting and the free zone
- Match the 22 mm range to the gap and target size
- Choose three-wire PNP/NPN or two-wire operation
- Check that 100 Hz is enough for the target speed
The manufacturer lists this article under the type designation Inductive sensor, IIKC022-ASKG/2LED/US-104. The article number IIS207 is the reference to quote when ordering, and the type designation is useful for technicians who compare the label on an installed unit.
Installation, commissioning and maintenance
Screw the sensor into a bracket or tapped hole, locking it with the two supplied nuts within the stated torque. Flush or non-flush mounting decides how much free metal-free space is needed around the sensing face, so follow the mounting entry in the table. Align the target path with the sensing axis and set the working distance with margin below the stated operating distance, to allow for temperature drift. In commissioning, check the LED while moving the target through the range. Inspect the sensing face for impact and the cable or connector for damage.
The sensor is physically larger, so use a bracket made for M30 and tighten the lock nuts evenly. Keep the free zone in front of the face clear. At 100 Hz it is intended for slow-moving targets, not for fast gear-tooth counting.
Typical applications in Oman and the GCC
Bulk-handling gate positions, large cylinders, crane and hoist limit detection and material presence on slow conveyors. In Oman and the GCC the long gap helps in yards and outdoor installations where tolerances drift with temperature.
Inductive sensors are among the most robust parts on a machine, but heat, vibration and repeated impacts still end their life. Choose the housing material and range to suit the environment, and keep spares of the common thread sizes.
IIS207 compared with related ifm types
The table places the IIS207 next to neighbouring types in the same application group, so you can see whether a sibling would suit the job better.
| Part number | Key characteristics | Note |
|---|---|---|
| IFS200 | M12 flush, 4 mm, brass, PNP/NPN, 4-pin M12 | Related type |
| IFS240 | M12 flush, 4 mm, L 60, IP65-IP69K | Related type |
| IFS244 | M12 flush, 4 mm, L 45, -40 to 85 C, IP69K | Related type |
| IGS204 | M18 flush, 8 mm, L 45, PNP, plug | Related type |
| IGS208 | M18 flush, 8 mm, L 70, PNP/NPN, 2 LED | Related type |
| IGS233 | M18 non-flush, 12 mm, L 60, IP65-IP69K | Related type |
| IIS207 | M30 non-flush, 22 mm, L 70, PNP/NPN, 2 LED | This page |
| IIS208 | M30 flush, 15 mm, L 50, PNP, plug | Related type |
| IE5351 | M8 flush, 3 mm, L 36, 0.3 m cable + M12 | Related type |
Information to send with an RFQ for the IIS207
To prepare an accurate offer for the IIS207, please include the following with your enquiry:
- Thread size and body length required
- Sensing range and the target material
- Flush or non-flush mounting
- Output wiring and connector or cable length
- Quantity and delivery location
Documents and quotation
The official ifm data sheet for the IIS207 (document IIS207-02, English, issued 26 June 2025) is attached on this page as a PDF. It sets out the electrical data, the output function, the operating conditions, the approvals and the dimension drawing for this article. Check these values and the wiring diagram against your application before ordering, then send us the quantity and the delivery location for a quotation.
Seven Star LLC is an independent supplier in Muscat serving Oman and the GCC and is not affiliated with the manufacturer; the name ifm is used only to identify the product. Prices are not shown on the page, so send the part number, the quantity and the delivery location to receive a quotation.
Other Models in the Ifm61 Ind Range
Seven Star LLC supplies models from the Ifm61 Ind range in Oman and the GCC. Compare the related models below and request a quote for the one that matches your application.
| Model | Category | |
|---|---|---|
| ifm IFS200 Inductive Sensor M12, 4 mm, Two-Wire, Brass | Automation Accessories | View details |
| ifm IFS240 Inductive Sensor M12, 4 mm, 60 mm Body, IP69K | Automation Accessories | View details |
| ifm IFS244 Inductive Sensor M12, 4 mm, IP69K, -40 to 85 C | Automation Accessories | View details |
| ifm IGS204 Inductive Sensor M18, 8 mm, Brass, PNP | Automation Accessories | View details |
| ifm IGS208 Inductive Sensor M18, 8 mm, 70 mm Body, 2 LED | Automation Accessories | View details |
| ifm IGS233 Inductive Sensor M18, 12 mm Non-Flush, IP69K | Automation Accessories | View details |
| ifm IIS207 Inductive Sensor M30, 22 mm Non-Flush, 2 LED | Automation Accessories | You are viewing this model |
| ifm IIS208 Inductive Sensor M30, 15 mm Flush, Brass, PNP | Automation Accessories | View details |
| ifm IE5351 Inductive Sensor M8, 3 mm, 0.3 m Cable with M12 | Automation Accessories | View details |
Datasheets & Documents
- Datasheet ifm IIS207 Data Sheet (PDF) Download
Reviews (0)
How would you rate this product? Cancel reply
About brand
ifm is a German family-owned maker of sensors and automation products, founded in Essen in October 1969 by Robert Buck and Gerd Marhofer. Its first products were inductive proximity sensors sold under the efector name. ifm is still headquartered in Essen, and the founders' sons, Martin Buck and Michael Marhofer, have led it since 2001.
Seven Star LLC lists ifm position, distance and pressure sensors and supplies them by exact article number to plants and machine builders in Oman and the wider Gulf region.
ifm company profile
| Founded | 1969, Essen, Germany |
|---|---|
| Founders | Robert Buck and Gerd Marhofer |
| Headquarters | Essen, Germany |
| Ownership | Family-owned |
| Product families | Inductive and capacitive proximity sensors, PN pressure sensors, O1D laser distance sensors, flow and level sensors, IO-Link masters |
Milestones
- 1969: ifm is founded in Essen.
- 2001: The founders' sons take over management.
ifm sensors listed on this page
ifm identifies every device with a short article number, and that number is what we order against. Three are listed here:
- O1D100: laser distance sensor for position and distance measurement
- PN7093: pressure sensor with local display
- NG5021: inductive proximity sensor with NAMUR output
Other ifm inductive sensors, pressure sensors and connection cables can be quoted on request when you send the article number.
ifm products we list
Ordering ifm sensors: what we need
Send the six-character article number printed on the housing (two letters and four digits, or similar). If the label is worn, a photo plus the thread size, sensing range, output type and connector style is enough for us to check the part against ifm documentation. For NAMUR sensors, tell us which isolating amplifier is in the loop. Buyers in the GCC who need a successor for a discontinued article can send the old number and we will check the replacement the manufacturer names.
Facts checked against ifm's own 50-year chronicle (ifm.com), October 2026.
Browse ifm products by category: Sensors & Transmitters, Pressure Instrumentation.
FAQ
Questions about the ifm IIS207 Inductive Sensor M30, 22 mm Non-Flush, 2
Answers from our engineering team on installation, compatibility and integration.
01What sensing range does the ifm IIS207 have?
22 mm non-flush, with an operating distance of 0 to 17.82 mm.
02What thread does the IIS207 have?
M30 x 1.5 with a body length of 70 mm. This is the value published by the manufacturer for the IIS207; confirm details before ordering.
03What switching frequency does the IIS207 offer?
100 Hz. This is the value published by the manufacturer for the IIS207; confirm details before ordering.
04Can the IIS207 be used in a two-wire circuit?
Yes, the manufacturer lists three-wire or two-wire operation with PNP/NPN.
05What is the protection rating of the IIS207?
IP67. This is the value published by the manufacturer for the IIS207; confirm details before ordering.


















Reviews
There are no reviews yet.