Brand:

ifm IE5351 Inductive Sensor M8, 3 mm, 0.3 m Cable with M12

Description

ifm IE5351 Inductive Sensor M8, 3 mm, 0.3 m Cable with M12

The ifm IE5351 is a small inductive sensor with an M8 x 1 thread, a 36 mm brass housing and a flush 3 mm sensing range. A 0.3 m PVC cable ends in an M12 connector with four contacts, which saves space compared with a direct plug. It runs on 10 to 30 V DC, supports PNP/NPN and three-wire or two-wire operation, and switches at 1000 Hz.

The ambient range is 0 to 60 degrees Celsius and protection is IP67. Seven Star LLC supplies the ifm IE5351 in Oman and the GCC as an independent supplier in Muscat.

IE5351 technical specifications

The table lists the values published by the manufacturer for the IE5351. Where a parameter has several operating modes, the headline value is shown; the full parameter list is in the manufacturer documentation.

Parameter Specification
Manufacturer / part number ifm electronic / IE5351
Sensing range [mm] 3
Thread designation M8 x 1
Dimensions [mm] M8 x 1 / L = 36
Mounting flush mountable
Real sensing range Sr [mm] 3 ± 10 %
Operating distance [mm] 0 to 2.4
Hysteresis [% of Sr] 1 to 15
Operating voltage [V] 10 to 30 DC
Current consumption [mA] < 10 (only in 3-wire operation)
Electrical design PNP/NPN
Output function normally open
Permanent current rating of switching output DC [mA] 100
Switching frequency DC [Hz] 1000
Ambient temperature [°C] 0 to 60
Protection IP 67
Weight [g] 31.2
Materials housing: brass white bronze coated; sensing face: LCP black; lock nuts: brass
Connector 1 x M12; coding: A; Contacts: 4; Locking: rotatable
Cable 0.3 m, PVC, black, Ø 3.4 mm; 3 x 0.14 mm²
MTTF [years] 1517

How the IE5351 works

An inductive proximity sensor such as the IE5351 generates a high-frequency magnetic field at its sensing face. When a metal target enters the field, eddy currents damp the oscillation, and the electronics switch the output. The real sensing range is stated for a standard steel target; other metals are detected at a shorter distance according to the correction factors in the table. No contact is made with the target, so there is no wear and the sensor is unaffected by dirt, oil or moisture on the target.

Where the IE5351 fits and related parts

The IE5351 is the pigtail version for tight spaces; the IE5352 is the neighbouring M8 type. For M12, see the IFS200 and IFS244.

Selection and ordering checklist for the IE5351

Work through the points below before you confirm the order, so that the IE5351 you receive is the one your machine or plant needs.

  • Confirm M8 x 1 and 36 mm length
  • Confirm the 0.3 m cable and the M12 plug at its end
  • Confirm flush 3 mm range
  • Check PNP/NPN or two-wire operation against the input
  • Check that 0 to 60 degrees Celsius suits the site

The manufacturer lists this article under the type designation Inductive sensor, IEBC003BASKG/0,3M/US. The article number IE5351 is the reference to quote when ordering, and the type designation is useful for technicians who compare the label on an installed unit.

Installation, commissioning and maintenance

Screw the sensor into a bracket or tapped hole, locking it with the two supplied nuts within the stated torque. Flush or non-flush mounting decides how much free metal-free space is needed around the sensing face, so follow the mounting entry in the table. Align the target path with the sensing axis and set the working distance with margin below the stated operating distance, to allow for temperature drift. In commissioning, check the LED while moving the target through the range. Inspect the sensing face for impact and the cable or connector for damage.

The short cable avoids strain on a small thread, but support the M12 plug on the bracket, not on the cable. Do not bend the cable tightly near the sensor. For the 1000 Hz switching rate, check that the controller input is fast enough.

Typical applications in Oman and the GCC

Miniature cylinders, grippers, small slides and instrumentation. In Oman and the GCC it is used in compact equipment and test stands.

Inductive sensors are among the most robust parts on a machine, but heat, vibration and repeated impacts still end their life. Choose the housing material and range to suit the environment, and keep spares of the common thread sizes.

IE5351 compared with related ifm types

The table places the IE5351 next to neighbouring types in the same application group, so you can see whether a sibling would suit the job better.

Part number Key characteristics Note
IFS200 M12 flush, 4 mm, brass, PNP/NPN, 4-pin M12 Related type
IFS240 M12 flush, 4 mm, L 60, IP65-IP69K Related type
IFS244 M12 flush, 4 mm, L 45, -40 to 85 C, IP69K Related type
IGS204 M18 flush, 8 mm, L 45, PNP, plug Related type
IGS208 M18 flush, 8 mm, L 70, PNP/NPN, 2 LED Related type
IGS233 M18 non-flush, 12 mm, L 60, IP65-IP69K Related type
IIS207 M30 non-flush, 22 mm, L 70, PNP/NPN, 2 LED Related type
IIS208 M30 flush, 15 mm, L 50, PNP, plug Related type
IE5351 M8 flush, 3 mm, L 36, 0.3 m cable + M12 This page

Information to send with an RFQ for the IE5351

To prepare an accurate offer for the IE5351, please include the following with your enquiry:

  • Thread size and body length required
  • Sensing range and the target material
  • Flush or non-flush mounting
  • Output wiring and connector or cable length
  • Quantity and delivery location

Documents and quotation

The official ifm data sheet for the IE5351 (document IE5351-01, English, issued 27 May 2026) is attached on this page as a PDF. It sets out the electrical data, the output function, the operating conditions, the approvals and the dimension drawing for this article. Check these values and the wiring diagram against your application before ordering, then send us the quantity and the delivery location for a quotation.

Seven Star LLC is an independent supplier in Muscat serving Oman and the GCC and is not affiliated with the manufacturer; the name ifm is used only to identify the product. Prices are not shown on the page, so send the part number, the quantity and the delivery location to receive a quotation.

Other Models in the Ifm61 Ind Range

Seven Star LLC supplies models from the Ifm61 Ind range in Oman and the GCC. Compare the related models below and request a quote for the one that matches your application.

ModelCategory
ifm IFS200 Inductive Sensor M12, 4 mm, Two-Wire, BrassAutomation AccessoriesView details
ifm IFS240 Inductive Sensor M12, 4 mm, 60 mm Body, IP69KAutomation AccessoriesView details
ifm IFS244 Inductive Sensor M12, 4 mm, IP69K, -40 to 85 CAutomation AccessoriesView details
ifm IGS204 Inductive Sensor M18, 8 mm, Brass, PNPAutomation AccessoriesView details
ifm IGS208 Inductive Sensor M18, 8 mm, 70 mm Body, 2 LEDAutomation AccessoriesView details
ifm IGS233 Inductive Sensor M18, 12 mm Non-Flush, IP69KAutomation AccessoriesView details
ifm IIS207 Inductive Sensor M30, 22 mm Non-Flush, 2 LEDAutomation AccessoriesView details
ifm IIS208 Inductive Sensor M30, 15 mm Flush, Brass, PNPAutomation AccessoriesView details
ifm IE5351 Inductive Sensor M8, 3 mm, 0.3 m Cable with M12Automation AccessoriesYou are viewing this model
Datasheets & Documents
  • PDF Datasheet ifm IE5351 Data Sheet (PDF) Download
Reviews (0)

Reviews

There are no reviews yet.

How would you rate this product?

It takes about 10 seconds — just tap a star. Your email is never published.

About brand

ifm is a German family-owned maker of sensors and automation products, founded in Essen in October 1969 by Robert Buck and Gerd Marhofer. Its first products were inductive proximity sensors sold under the efector name. ifm is still headquartered in Essen, and the founders' sons, Martin Buck and Michael Marhofer, have led it since 2001.

Seven Star LLC lists ifm position, distance and pressure sensors and supplies them by exact article number to plants and machine builders in Oman and the wider Gulf region.

ifm company profile

Founded 1969, Essen, Germany
Founders Robert Buck and Gerd Marhofer
Headquarters Essen, Germany
Ownership Family-owned
Product families Inductive and capacitive proximity sensors, PN pressure sensors, O1D laser distance sensors, flow and level sensors, IO-Link masters

Milestones

  • 1969: ifm is founded in Essen.
  • 2001: The founders' sons take over management.

ifm sensors listed on this page

ifm identifies every device with a short article number, and that number is what we order against. Three are listed here:

  • O1D100: laser distance sensor for position and distance measurement
  • PN7093: pressure sensor with local display
  • NG5021: inductive proximity sensor with NAMUR output

Other ifm inductive sensors, pressure sensors and connection cables can be quoted on request when you send the article number.

ifm products we list

Family Examples
Inductive Proximity Sensors NG5021 Inductive NAMUR Proximity Sensor
Laser Distance, LiDAR & Radar Sensors O1D100 Laser Distance Sensor
Pressure Instrumentation PN7093 Pressure Sensor with Display

Ordering ifm sensors: what we need

Send the six-character article number printed on the housing (two letters and four digits, or similar). If the label is worn, a photo plus the thread size, sensing range, output type and connector style is enough for us to check the part against ifm documentation. For NAMUR sensors, tell us which isolating amplifier is in the loop. Buyers in the GCC who need a successor for a discontinued article can send the old number and we will check the replacement the manufacturer names.

Facts checked against ifm's own 50-year chronicle (ifm.com), October 2026.

FAQ

Questions about the ifm IE5351 Inductive Sensor M8, 3 mm, 0.3 m Cable

Answers from our engineering team on installation, compatibility and integration.

01What is the thread of the ifm IE5351?
M8 x 1 with a body length of 36 mm. This is the value published by the manufacturer for the IE5351; confirm details before ordering.
02What sensing range does the IE5351 have?
3 mm flush, operating distance 0 to 2.4 mm. This is the value published by the manufacturer for the IE5351; confirm details before ordering.
03What cable does the IE5351 have?
A PVC cable of 0.3 m with an M12 connector with four contacts.
04What is the switching frequency of the IE5351?
1000 Hz. This is the value published by the manufacturer for the IE5351; confirm details before ordering.
05What is the ambient range of the IE5351?
0 to 60 degrees Celsius. This is the value published by the manufacturer for the IE5351; confirm details before ordering.