Brand:

ifm KG5065 Capacitive Sensor M18, 12 mm Non-Flush, PNP/NPN

Description

ifm KG5065 Capacitive Sensor M18, 12 mm Non-Flush, PNP/NPN

The ifm KG5065 is a capacitive sensor with an M18 x 1 thread, an 87 mm body and a non-flush sensing range of 12 mm. It detects the output load automatically as PNP or NPN, so a single type covers both kinds of controller input, as long as a resistive load stays below 20 kilohm. Empty and full states are set by pushbutton, the function is normally open or normally closed, and the sensor resists electrostatic discharge.

The output rated at 200 mA, the supply of 10 to 36 V DC and the IO-Link interface complete the data. Seven Star LLC supplies the KG5065 in Oman and the GCC as an independent supplier in Muscat.

KG5065 technical specifications

The table lists the values published by the manufacturer for the KG5065. Where a parameter has several operating modes, the headline value is shown; the full parameter list is in the manufacturer documentation.

Parameter Specification
Manufacturer / part number ifm electronic / KG5065
Sensing range [mm] 12
Thread designation M18 x 1
Dimensions [mm] M18 x 1 / L = 87
Mounting non-flush mountable
Hysteresis [% of Sr] 1 to 15
Operating voltage [V] 10 to 36 DC
Current consumption [mA] < 20
Electrical design PNP/NPN (automatic load detection PNP/NPN:; when using a resistive load < 20 kΩ)
Output function normally open / normally closed (selectable)
Permanent current rating of switching output DC [mA] 200
Switching frequency DC [Hz] 10
Communication interface IO-Link
Ambient temperature [°C] -25 to 80
Protection IP 65; IP 67
Weight [g] 31.5
Materials housing, cover: PBT; pushbuttons: TPE-U; LED window: PC
Connector 1 x M12; coding: A; Contacts: 4
MTTF [years] 566

How the KG5065 works

The KG5065 is a compact capacitive proximity sensor. Its electrode builds up an electric field in front of the sensing face, and when material with a different dielectric constant enters the field, the capacitance changes and the output switches. This lets the sensor detect liquids and dry bulk material through a non-metallic container wall, or on a bypass pipe, without contact. The sensitivity can be taught through the pushbuttons to ignore the container wall.

Where the KG5065 fits and related parts

Choose the KG5065 where the M30 KI5083 is too large for the tank connection. The KQ5101 is the flat external version and the KI5301 the high-temperature M30 version.

Selection and ordering checklist for the KG5065

Work through the points below before you confirm the order, so that the KG5065 you receive is the one your machine or plant needs.

  • Check M18 x 1 thread and 87 mm length
  • Check wall material and thickness against 12 mm
  • Confirm the load: automatic PNP/NPN detection requires a resistive load below 20 kilohm
  • Select normally open or normally closed
  • Confirm IO-Link is available if required

The manufacturer lists this article under the type designation Capacitive sensor, KG-3120NFAKGP2T/US. The article number KG5065 is the reference to quote when ordering, and the type designation is useful for technicians who compare the label on an installed unit.

Installation, commissioning and maintenance

Fix the sensor on the container wall with the mounting adapter or cable ties so the sensing face contacts the wall, at the height of the level to be detected. At commissioning, use the teach function with the container empty and then full, check the switching, and lock the settings with the electronic lock. Deposits on the inside wall or condensation can influence the switching, so recheck sensitivity after changes in the product.

Install with the face against the wall or in a sight glass boss, then teach the full and empty states with the real liquid. Keep cables away from power lines to avoid noise on the capacitive circuit and check that the wall is clean.

Typical applications in Oman and the GCC

Level detection in small plastic tanks and dosing vessels and presence detection of granular material through a wall. In Oman and the GCC, it helps in compact skid designs.

Non-contact sensors on plastic tanks suit sites where drilling a vessel is not allowed. Heat and condensation on the wall can shift the switching point, so teach the sensor at normal operating conditions.

KG5065 compared with related ifm types

The table places the KG5065 next to neighbouring types in the same application group, so you can see whether a sibling would suit the job better.

Part number Key characteristics Note
KQ5101 Flat 20x7x48, 12 mm, IO-Link, 0.1 m cable Related type
KI5083 M30 non-flush, 20 mm, L 90, IO-Link Related type
KG5065 M18 non-flush, 12 mm, L 87, PNP/NPN auto, IO-Link This page
KI5301 M30 non-flush, 0.5-40 mm adj., medium to 110 C Related type
KQ6005 Capacitive sensor in our range Related type

Information to send with an RFQ for the KG5065

To prepare an accurate offer for the KG5065, please include the following with your enquiry:

  • Container material and wall thickness
  • Medium to be detected
  • Mounting position and space
  • Output polarity and cordset
  • Quantity and delivery location

Storage, handling and spares for the ifm KG5065

Keep ifm KG5065 units in their original packaging until they are mounted. Store them indoors in a dry, dust-free room, away from direct sun and condensation. Panel shops in Oman and the GCC often hold stock in warehouses that get very hot in summer, so check that storage temperature stays within the limits given in the manufacturer datasheet.

  • Check the label and order code on every unit against the drawing before it goes into the panel.
  • Use the correct tool and tightening torque for the terminals, as given in the instructions supplied with the product.
  • Keep a small number of spare units for each rating used on site, so that a failed or damaged part can be replaced without waiting for a new shipment.
  • Record the order code in the panel documentation and the as-built drawings, so that maintenance teams can reorder the same part later.

When you plan spares for a project, group the ifm KG5065 with the other parts of the same panel in one RFQ. This keeps delivery dates aligned and makes it easier to confirm stock for the whole bill of materials at once.

Documents and quotation

The official ifm data sheet for the KG5065 (document KG5065-02, English, issued 10 August 2026) is attached on this page as a PDF. It sets out the electrical data, the output function, the operating conditions, the approvals and the dimension drawing for this article. Check these values and the wiring diagram against your application before ordering, then send us the quantity and the delivery location for a quotation.

Seven Star LLC is an independent supplier in Muscat serving Oman and the GCC and is not affiliated with the manufacturer; the name ifm is used only to identify the product. Prices are not shown on the page, so send the part number, the quantity and the delivery location to receive a quotation.

Other Models in the Ifm61 Cap Range

Seven Star LLC supplies models from the Ifm61 Cap range in Oman and the GCC. Compare the related models below and request a quote for the one that matches your application.

ModelCategory
ifm KQ5101 Capacitive Sensor Flat 20x7x48, 12 mm, IO-LinkAutomation AccessoriesView details
ifm KI5083 Capacitive Sensor M30, 20 mm Non-Flush, IO-LinkAutomation AccessoriesView details
ifm KG5065 Capacitive Sensor M18, 12 mm Non-Flush, PNP/NPNAutomation AccessoriesYou are viewing this model
ifm KI5301 Capacitive Sensor M30, 110 C Medium, IO-LinkAutomation AccessoriesView details
Datasheets & Documents
  • PDF Datasheet ifm KG5065 Data Sheet (PDF) Download
Reviews (0)

Reviews

There are no reviews yet.

How would you rate this product?

It takes about 10 seconds — just tap a star. Your email is never published.

About brand

ifm is a German family-owned maker of sensors and automation products, founded in Essen in October 1969 by Robert Buck and Gerd Marhofer. Its first products were inductive proximity sensors sold under the efector name. ifm is still headquartered in Essen, and the founders' sons, Martin Buck and Michael Marhofer, have led it since 2001.

Seven Star LLC lists ifm position, distance and pressure sensors and supplies them by exact article number to plants and machine builders in Oman and the wider Gulf region.

ifm company profile

Founded 1969, Essen, Germany
Founders Robert Buck and Gerd Marhofer
Headquarters Essen, Germany
Ownership Family-owned
Product families Inductive and capacitive proximity sensors, PN pressure sensors, O1D laser distance sensors, flow and level sensors, IO-Link masters

Milestones

  • 1969: ifm is founded in Essen.
  • 2001: The founders' sons take over management.

ifm sensors listed on this page

ifm identifies every device with a short article number, and that number is what we order against. Three are listed here:

  • O1D100: laser distance sensor for position and distance measurement
  • PN7093: pressure sensor with local display
  • NG5021: inductive proximity sensor with NAMUR output

Other ifm inductive sensors, pressure sensors and connection cables can be quoted on request when you send the article number.

ifm products we list

Family Examples
Inductive Proximity Sensors NG5021 Inductive NAMUR Proximity Sensor
Laser Distance, LiDAR & Radar Sensors O1D100 Laser Distance Sensor
Pressure Instrumentation PN7093 Pressure Sensor with Display

Ordering ifm sensors: what we need

Send the six-character article number printed on the housing (two letters and four digits, or similar). If the label is worn, a photo plus the thread size, sensing range, output type and connector style is enough for us to check the part against ifm documentation. For NAMUR sensors, tell us which isolating amplifier is in the loop. Buyers in the GCC who need a successor for a discontinued article can send the old number and we will check the replacement the manufacturer names.

Facts checked against ifm's own 50-year chronicle (ifm.com), October 2026.

FAQ

Questions about the ifm KG5065 Capacitive Sensor M18, 12 mm Non-Flush,

Answers from our engineering team on installation, compatibility and integration.

01Does the ifm KG5065 work with PNP and NPN inputs?
Yes, it detects the load automatically as PNP or NPN, with a resistive load below 20 kilohm.
02What range does the KG5065 have?
12 mm non-flush. This is the value published by the manufacturer for the KG5065; confirm details before ordering.
03What thread does the KG5065 have?
M18 x 1 with a length of 87 mm. This is the value published by the manufacturer for the KG5065; confirm details before ordering.
04Is the KG5065 IO-Link capable?
Yes, the communication interface is IO-Link. This is the value published by the manufacturer for the KG5065; confirm details before ordering.
05What is the output current of the KG5065?
200 mA continuous. This is the value published by the manufacturer for the KG5065; confirm details before ordering.