- Automation & ControlView all 2,610 products
- Automation Accessories
- AC Drives
- PLC & I/O Cards
- Industrial Communications
- Vibration Monitoring
- Controllers & Data Acquisition
- Isolator & Barrier
- Safety Switches & Guard Locking
- Motor Soft Starters
- CCTV & Security
- Encoders
- HMI Displays
- Pneumatic Cylinders
- Servo Drives
- Industrial Computers
- Machine Vision
- Automation Software
- Robotics
Brand: ifm
ifm IFS200 Inductive Sensor M12, 4 mm, Two-Wire, Brass
Description
ifm IFS200 Inductive Sensor M12, 4 mm, Two-Wire, Brass
The ifm IFS200 is a short inductive proximity sensor in an M12 x 1 brass housing, 45 mm long, with a flush-mountable sensing range of 4 mm. The manufacturer describes the family as two-wire technology, and the electrical data list PNP/NPN operation on a 10 to 30 V DC supply, a normally open output rated for 100 mA and a switching frequency of 700 Hz. A bright LED on the housing shows the switching state.
The housing is white bronze coated brass with a PBT sensing face, and the unit is protected to IP67 over an ambient range of -25 to 70 degrees Celsius. The connector is an M12 with four gold-plated contacts. Seven Star LLC supplies the IFS200 in Oman and the GCC as an independent supplier in Muscat.
IFS200 technical specifications
The table lists the values published by the manufacturer for the IFS200. Where a parameter has several operating modes, the headline value is shown; the full parameter list is in the manufacturer documentation.
| Parameter | Specification |
|---|---|
| Manufacturer / part number | ifm electronic / IFS200 |
| Sensing range [mm] | 4 |
| Thread designation | M12 x 1 |
| Dimensions [mm] | M12 x 1 / L = 45 |
| Mounting | flush mountable |
| Real sensing range Sr [mm] | 4 ± 10 % |
| Operating distance [mm] | 0 to 3.25 |
| Hysteresis [% of Sr] | 3 to 15 |
| Operating voltage [V] | 10 to 30 DC |
| Electrical design | PNP/NPN |
| Output function | normally open |
| Permanent current rating of switching output DC [mA] | 100 |
| Switching frequency DC [Hz] | 700 |
| Ambient temperature [°C] | -25 to 70 |
| Protection | IP 67 |
| Weight [g] | 25.2 |
| Materials | housing: brass white bronze coated; sensing face: PBT |
| Connector | 1 x M12; coding: A; Contacts: 4, gold-plated |
| MTTF [years] | 2487 |
How the IFS200 works
An inductive proximity sensor such as the IFS200 generates a high-frequency magnetic field at its sensing face. When a metal target enters the field, eddy currents damp the oscillation, and the electronics switch the output. The real sensing range is stated for a standard steel target; other metals are detected at a shorter distance according to the correction factors in the table. No contact is made with the target, so there is no wear and the sensor is unaffected by dirt, oil or moisture on the target.
Where the IFS200 fits and related parts
The IFS200 and the IFS204 share the M12 x 1, 45 mm, 4 mm flush body, but the IFS200 carries a four-contact M12 connector and PNP/NPN flexibility, while the IFS204 is a three-contact plug version. For harsher environments with IP69K and a wider temperature window look at the IFS244, and for more range at the IGS204 or IIS207.
Selection and ordering checklist for the IFS200
Work through the points below before you confirm the order, so that the IFS200 you receive is the one your machine or plant needs.
- Confirm the thread M12 x 1 and the 45 mm body length
- Confirm flush mounting and the 4 mm sensing range
- Check the four-contact M12 connector against your cordset
- Check the PNP/NPN wiring of your input card and the normally open function
- Check the target material, since steel is detected at the full range and other metals at a reduced range
The manufacturer lists this article under the type designation Inductive sensor, IFB2004BARKG/M/US-104-DRS. The article number IFS200 is the reference to quote when ordering, and the type designation is useful for technicians who compare the label on an installed unit.
Installation, commissioning and maintenance
Screw the sensor into a bracket or tapped hole, locking it with the two supplied nuts within the stated torque. Flush or non-flush mounting decides how much free metal-free space is needed around the sensing face, so follow the mounting entry in the table. Align the target path with the sensing axis and set the working distance with margin below the stated operating distance, to allow for temperature drift. In commissioning, check the LED while moving the target through the range. Inspect the sensing face for impact and the cable or connector for damage.
Fit the sensor in a bracket with the two supplied lock nuts and keep to the tightening torque in the manufacturer documentation. As a flush sensor it can be embedded in metal, but keep the free zone in front of the face clear of other metal. Confirm the LED changes state when the target enters the operating distance of up to 3.25 mm.
Typical applications in Oman and the GCC
Short-stroke cylinder end positions, valve position confirmation, gear-tooth and cam detection and general machine interlocks. In Oman and the GCC it fits skids and packaged equipment where space behind a bracket is limited.
Inductive sensors are among the most robust parts on a machine, but heat, vibration and repeated impacts still end their life. Choose the housing material and range to suit the environment, and keep spares of the common thread sizes.
IFS200 compared with related ifm types
The table places the IFS200 next to neighbouring types in the same application group, so you can see whether a sibling would suit the job better.
| Part number | Key characteristics | Note |
|---|---|---|
| IFS200 | M12 flush, 4 mm, brass, PNP/NPN, 4-pin M12 | This page |
| IFS240 | M12 flush, 4 mm, L 60, IP65-IP69K | Related type |
| IFS244 | M12 flush, 4 mm, L 45, -40 to 85 C, IP69K | Related type |
| IGS204 | M18 flush, 8 mm, L 45, PNP, plug | Related type |
| IGS208 | M18 flush, 8 mm, L 70, PNP/NPN, 2 LED | Related type |
| IGS233 | M18 non-flush, 12 mm, L 60, IP65-IP69K | Related type |
| IIS207 | M30 non-flush, 22 mm, L 70, PNP/NPN, 2 LED | Related type |
| IIS208 | M30 flush, 15 mm, L 50, PNP, plug | Related type |
| IE5351 | M8 flush, 3 mm, L 36, 0.3 m cable + M12 | Related type |
Information to send with an RFQ for the IFS200
To prepare an accurate offer for the IFS200, please include the following with your enquiry:
- Thread size and body length required
- Sensing range and the target material
- Flush or non-flush mounting
- Output wiring and connector or cable length
- Quantity and delivery location
Documents and quotation
The official ifm data sheet for the IFS200 (document IFS200-01, English, issued 14 January 2025) is attached on this page as a PDF. It sets out the sensing range, the electrical data, the output function, the operating conditions, the approvals and the dimension drawing for this article. Check these values and the wiring diagram against your application before ordering, then send us the quantity and the delivery location for a quotation.
Seven Star LLC is an independent supplier in Muscat serving Oman and the GCC and is not affiliated with the manufacturer; the name ifm is used only to identify the product. Prices are not shown on the page, so send the part number, the quantity and the delivery location to receive a quotation.
Other Models in the Ifm61 Ind Range
Seven Star LLC supplies models from the Ifm61 Ind range in Oman and the GCC. Compare the related models below and request a quote for the one that matches your application.
| Model | Category | |
|---|---|---|
| ifm IFS200 Inductive Sensor M12, 4 mm, Two-Wire, Brass | Automation Accessories | You are viewing this model |
| ifm IFS240 Inductive Sensor M12, 4 mm, 60 mm Body, IP69K | Automation Accessories | View details |
| ifm IFS244 Inductive Sensor M12, 4 mm, IP69K, -40 to 85 C | Automation Accessories | View details |
| ifm IGS204 Inductive Sensor M18, 8 mm, Brass, PNP | Automation Accessories | View details |
| ifm IGS208 Inductive Sensor M18, 8 mm, 70 mm Body, 2 LED | Automation Accessories | View details |
| ifm IGS233 Inductive Sensor M18, 12 mm Non-Flush, IP69K | Automation Accessories | View details |
| ifm IIS207 Inductive Sensor M30, 22 mm Non-Flush, 2 LED | Automation Accessories | View details |
| ifm IIS208 Inductive Sensor M30, 15 mm Flush, Brass, PNP | Automation Accessories | View details |
| ifm IE5351 Inductive Sensor M8, 3 mm, 0.3 m Cable with M12 | Automation Accessories | View details |
Datasheets & Documents
- Datasheet ifm IFS200 Data Sheet (PDF) Download
Reviews (0)
How would you rate this product? Cancel reply
About brand
ifm is a German family-owned maker of sensors and automation products, founded in Essen in October 1969 by Robert Buck and Gerd Marhofer. Its first products were inductive proximity sensors sold under the efector name. ifm is still headquartered in Essen, and the founders' sons, Martin Buck and Michael Marhofer, have led it since 2001.
Seven Star LLC lists ifm position, distance and pressure sensors and supplies them by exact article number to plants and machine builders in Oman and the wider Gulf region.
ifm company profile
| Founded | 1969, Essen, Germany |
|---|---|
| Founders | Robert Buck and Gerd Marhofer |
| Headquarters | Essen, Germany |
| Ownership | Family-owned |
| Product families | Inductive and capacitive proximity sensors, PN pressure sensors, O1D laser distance sensors, flow and level sensors, IO-Link masters |
Milestones
- 1969: ifm is founded in Essen.
- 2001: The founders' sons take over management.
ifm sensors listed on this page
ifm identifies every device with a short article number, and that number is what we order against. Three are listed here:
- O1D100: laser distance sensor for position and distance measurement
- PN7093: pressure sensor with local display
- NG5021: inductive proximity sensor with NAMUR output
Other ifm inductive sensors, pressure sensors and connection cables can be quoted on request when you send the article number.
ifm products we list
Ordering ifm sensors: what we need
Send the six-character article number printed on the housing (two letters and four digits, or similar). If the label is worn, a photo plus the thread size, sensing range, output type and connector style is enough for us to check the part against ifm documentation. For NAMUR sensors, tell us which isolating amplifier is in the loop. Buyers in the GCC who need a successor for a discontinued article can send the old number and we will check the replacement the manufacturer names.
Facts checked against ifm's own 50-year chronicle (ifm.com), October 2026.
Browse ifm products by category: Sensors & Transmitters, Pressure Instrumentation.
FAQ
Questions about the ifm IFS200 Inductive Sensor M12, 4 mm, Two-Wire,
Answers from our engineering team on installation, compatibility and integration.
01What is the sensing range of the ifm IFS200?
The nominal sensing range is 4 mm for flush mounting, with a real sensing range of 4 mm plus or minus 10 percent and an operating distance of 0 to 3.25 mm.
02What housing does the IFS200 have?
An M12 x 1 brass housing with a white bronze coating, 45 mm long, with a PBT sensing face.
03What connector does the IFS200 use?
A single M12 connector with four gold-plated contacts, coding A.
04How fast can the IFS200 switch?
The switching frequency is 700 Hz with a permanent switching current of 100 mA.
05What temperature range applies to the IFS200?
-25 to 70 degrees Celsius ambient, with IP67 protection.


















Reviews
There are no reviews yet.