Hanna Instruments HI1043B pH electrode

Description

Hanna HI1043B Refillable Double Junction pH Electrode with BNC Connector overview

Hanna Instruments HI1043B is the part number of the Refillable Double Junction pH Electrode with BNC Connector. This page summarises what the maker publishes for HI1043B, so that maintenance teams, laboratory managers and procurement staff in Oman and the GCC can check the key parameters before sending a request for quotation. Seven Star LLC is an independent supplier serving Oman and the GCC and is not affiliated with the manufacturer. Every figure below comes from the published product information and should be confirmed against the current documentation for your instrument and application.

A pH electrode converts the hydrogen ion activity of a sample into a small voltage that a meter, controller or transmitter turns into a pH reading. The glass membrane, the reference system and the junction all influence how fast, stable and repeatable that reading is, which is why the exact model matters when an installed instrument is repaired. Probes and electrodes are consumables: they age with use, so buyers often search for the exact order code such as HI1043B to replace a unit on an installed meter without changing the measuring method that was validated on site.

Key features of HI1043B

  • Described by the maker as: refillable, combination pH electrode w/ double junction.
  • Body material: glass.
  • Connection: BNC.
  • Measuring range: pH: 0 to 14.
  • Operating temperature: 0 to 100°C (32 to 212°F).
  • Electrolyte: KCl 3.5M.
  • Junction and flow rate: e ceramic, double / 30-40 µL/h.
  • Maximum pressure: 0.1 bar.
  • Cable: coaxial 1 m (3.3′).
  • Recommended use: hydrocarbons, paints, solvents, sea water, strong acids and bases, high conductivity samples, tris buffer.

Technical specifications of HI1043B

The table lists the values printed by the manufacturer for HI1043B. Entries that the maker does not publish have been left out instead of estimated.

Parameter Value
Part number Hanna HI1043B
Description refillable, combination pH electrode w/ double junction
Reference e double, Ag/AgCl
Junction / flow rate e ceramic, double / 30-40 µL/h
Electrolyte KCl 3.5M
Maximum pressure 0.1 bar
Measuring range pH: 0 to 14
Operating temperature 0 to 100°C (32 to 212°F)
Tip shape spheric (dia: 9.5 mm)
Temperature sensor no
Built-in amplifier no
Body material glass
Cable coaxial 1 m (3.3′)
Connection BNC
Recommended use hydrocarbons, paints, solvents, sea water, strong acids and bases, high conductivity samples, tris buffer

Reading the HI1043B data

For a pH electrode the operating temperature and the pressure limit define where the sensor can be installed, and the junction type decides how well it copes with dirty, viscous or low conductivity samples. Hanna HI1043B is stated for 0 to 100°C (32 to 212°F) and for hydrocarbons, paints, solvents, sea water, strong acids and bases, high conductivity samples, tris buffer. Check these against the process before choosing between similar-looking models in the same family.

Typical applications of HI1043B in Oman and the GCC

Water quality and process chemistry measurements are routine in the region. In oil and gas facilities the water laboratory checks boiler feed, produced water treatment, cooling water and effluent. Utilities and desalination plants monitor raw water, product water and chemical dosing steps. Municipal wastewater works, food and beverage plants and general manufacturing use similar sensors for quality control. The maker lists the following recommended use for HI1043B: hydrocarbons, paints, solvents, sea water, strong acids and bases, high conductivity samples, tris buffer. Hot ambient conditions make careful storage and regular calibration particularly important, because dry or overheated sensing elements age quickly.

Selection and compatibility notes for HI1043B

Before ordering HI1043B, confirm three points. First, the connector: the table shows BNC, and it must match the meter input, because BNC, DIN, quick connect DIN, banana and 3.5 mm styles are not interchangeable. Second, the sample: compare the temperature and pressure limits and the body material with your process. Third, the measuring task: models in the same family differ in tip shape, junction, electrolyte and amplifier, so a similar looking code can behave differently. If you are replacing an existing electrode, quote the code printed on the old one together with the meter model, and mention if an alternative is acceptable.

Installation and commissioning of HI1043B

Remove the protective cap or soaking bottle if one is fitted, rinse the sensor with clean water and connect it to the instrument before switching it on. Refillable models should be topped up with the electrolyte stated in the table and the fill hole opened during measurement. Calibrate with fresh standards that bracket the expected values, using the procedure of the meter in use, and note the slope or offset after commissioning. For HI1043B keep the cable away from power cables and motors, and do not bend the coaxial or multi-pole cable sharply, since cable damage is a frequent source of unstable readings.

Maintenance and storage for HI1043B

Keep sensing elements wet in the storage or soaking solution recommended by the maker, clean them with a suitable cleaning solution when the response slows, and replace the sensor when calibration can no longer be achieved. Rinse between samples and avoid touching glass or metal surfaces. Record the date of installation and the calibration results so the working life of HI1043B in your application is known, and keep one spare of the exact code in a cool, clean store for planned outages.

Good measurement practice for sensors of this type

Reliable results depend as much on routine as on hardware. Use fresh calibration standards, store opened bottles tightly closed, and discard standards that have been contaminated by dipping a wet sensor. Allow the reading to stabilise before accepting a value, because a drifting display usually means the sensor has not reached equilibrium with the sample or the temperature. Record the sample temperature, since most chemical measurements change with it. In hot climates samples left in a vehicle can warm quickly, so measure on site wherever possible and keep sensors out of direct sun. When a sensor shows a slow response, a low slope, a large offset or noisy readings, clean it, recalibrate, and only then consider replacement. Keep a simple log for each measuring point that lists the sensor code, installation date, cleaning dates and calibration results. Such a log makes it easy to see whether a failure is caused by the sample, by handling or by ordinary ageing, and it supports audits in laboratories that follow quality systems. Training operators to rinse, blot and store sensors correctly is usually the cheapest way to extend sensor life and to reduce repeat purchases.

Related products and ordering notes for HI1043B

Hanna Instruments offers many electrodes that differ only by connector, body material or junction, so the part number is the only reliable identifier. Alongside HI1043B we can quote related buffers, storage and cleaning solutions, reference electrodes and meters when you are reviewing a whole measuring point. Availability and lead time are confirmed per request, and no price is shown on this page.

Frequently asked points about HI1043B

  • What is HI1043B? It is the part number of the Refillable Double Junction pH Electrode with BNC Connector.
  • Which connector does it use? BNC.
  • What is the stated temperature range? 0 to 100°C (32 to 212°F).
  • How do I order? Send the RFQ with the part number HI1043B and the required quantity.

Documents and quotation

The official Hanna Instruments HI2210 / HI2211 pH/mV/°C Bench Meter Instruction Manual is attached to this page as a PDF. The pH electrodes section of the accessories chapter (page 15) lists HI1043B as a glass-body, double junction, refillable combination pH electrode with BNC connector and 1 m cable, recommended by Hanna for strong acid and alkali samples. Send us the code HI1043B with the meter model you use it with and we will confirm compatibility and lead time in a written quotation.

Datasheets & Documents
  • PDF Datasheet Hanna HI2210 / HI2211 pH Bench Meter Instruction Manual (official PDF) Download
Reviews (0)

Reviews

There are no reviews yet.

How would you rate this product?

It takes about 10 seconds — just tap a star. Your email is never published.

About brand

Hanna Instruments is a maker of analytical instruments for water and liquid testing, founded in 1978 in the Padua area of Italy by Oscar and Anna Nardo. Its early breakthrough was the pHep, an affordable pocket-sized pH tester. The company is now led by the founders' children, Martino and Pamela Nardo, with its headquarters in Woonsocket, Rhode Island, and offers more than 3,000 products.

Seven Star LLC is an independent supplier in Muscat. We list Hanna instruments for water, wastewater and laboratory users in Oman and the GCC.

Hanna Instruments company profile

Founded 1978, near Padua, Italy, by Oscar and Anna Nardo
Headquarters Woonsocket, Rhode Island, USA
Leadership Martino Nardo and Pamela Nardo
Early product The pHep pocket pH tester
Product families pHep and HI98 waterproof testers, edge benchtop meters, HI83 multiparameter photometers, Checker HC handheld colorimeters, HI931 and HI932 titrators, process controllers, reagents and calibration buffers

Hanna product series

Portable meters include the HI98190 pH and ORP meter, the HI98192 EC, TDS and salinity meter, the HI98193 dissolved oxygen and BOD meter, the HI98199 pH, EC and DO meter and the HI9829 multiparameter water quality meter.

The HI98703 is an EPA compliant portable turbidity meter, the HI97711 a free and total chlorine photometer and the HI83414 a benchtop turbidity and chlorine meter.

Waterproof portable meters such as the HI98190 and HI98192 suit field use, with automatic temperature compensation and GLP data for audits. Turbidity measurement with the HI98703 follows EPA method 180.1, and the HI97711 photometer measures free and total chlorine for disinfection control.

Where Hanna instruments are used

Drinking water and desalination plants, wastewater treatment, environmental field surveys, aquaculture, cooling water and quality control labs.

Hanna Instruments products we list

Family Examples
Portable Test & Measurement Hanna HI97711 Free and Total Chlorine Po…, Hanna HI98190 Waterproof Portable pH and…, Hanna HI98192 Waterproof Portable EC, Hanna HI98193 Waterproof Portable Dissol…, Hanna HI98199 Portable pH, Hanna HI9829 Multiparameter Water Qualit…, Hanna HI98703 Portable Turbidity Meter

Ordering Hanna instruments: what we need

Send the model, the parameters and ranges, the probe and cable length and any reagents or calibration solutions required.

Facts checked against Hanna Instruments' own company story and City of Woonsocket business profile, October 2026.

FAQ

Questions about the Hanna Instruments HI1043B pH electrode

Answers from our engineering team on installation, compatibility and integration.

01What is Hanna Instruments HI1043B?
HI1043B is the part number of the Refillable Double Junction pH Electrode with BNC Connector, as listed by the manufacturer.
02What connector does HI1043B use?
The manufacturer lists the connection as BNC.
03What temperature range is stated for HI1043B?
The manufacturer states 0 to 100°C (32 to 212°F) for this item.
04What is HI1043B recommended for?
The maker lists the following use: hydrocarbons, paints, solvents, sea water, strong acids and bases, high conductivity samples, tris buffer.
05How do I request a quote for HI1043B?
Send an RFQ to Seven Star LLC with the part number HI1043B and quantity. We are an independent supplier and not affiliated with the manufacturer.