Brand:

GESTRA QuickEM Pre-Assembled Condensate Drain Module PN 16/40

Description

GESTRA QuickEM pre-assembled drain module

Building a condensate drain station on site means ordering a trap, two isolating valves, a sight glass, a non-return valve, pipe, flanges and gaskets, then welding or bolting them together. The GESTRA QuickEM is that station delivered as one pre-assembled drain module for heat recovery installations. According to the datasheet it consists of two or three shut-off valves, one steam trap of type BK, MK or UNA, one sightglass, one wafer-type non-return valve RK, plus pipes and all necessary flanges, flange gaskets and bolts. Counterflanges with bolts and gaskets are not part of the delivery.

Seven Star LLC is an independent supplier serving Oman and the GCC and is not affiliated with the manufacturer. The following is a rewording of the datasheet and should be checked against the current document.

How the QuickEM module works

Steam and condensate flow through the first shut-off valve to the steam trap. The regulator in the trap discharges the condensate through the second shut-off valve into the condensate collecting system. The two valves allow the trap to be isolated for maintenance, and an integrated bypass line, available as an option, lets the operator bypass the trap if necessary. The module is available for horizontal or vertical installation, with or without the bypass.

QuickEM and QuickEM Control

The QuickEM Control version replaces the sightglass with a measuring electrode NRG 16 for electronic condensate monitoring, so traps are monitored for waterlogging and steam loss. With BK 45, MK 45 and UNA 4x traps the electrode sits directly in the trap, and with BK 15, MK 25 and UNA 1x traps it sits in a test chamber VKE. Note that the Control version with a UNA trap is available only for horizontal installation.

QuickEM data summary

Parameter Value
Type GESTRA QuickEM, drain module
Sizes DN 15, 20, 25, 40, 50
Rating PN 16 or PN 40
Connections Flanged EN 1092-1 B1 PN 16 and PN 40
Position Horizontal or vertical, with or without bypass
Steel pipes and fittings P235GH
Stainless steel version 1.4571 pipes and fittings
Gaskets PSM graphite / perforated steel
Bolts and nuts 5.6/5.2 (steel), A2/70 (stainless)
Steel PN 16 limits 16.0 barg at 20 °C; 14.4 at 100 °C; 12.8 at 200 °C; 11.2 at 250 °C; 9.6 at 280 °C; pH up to 9
Steel PN 40 limits 40.0 barg at 20 °C; 37.3 at 100 °C; 30.0 at 200 °C; 28.4 at 250 °C; 25.8 at 300 °C; pH up to 10
Stainless PN 40 limits 40.0 barg at 20 °C; 32.5 at 100 °C; 25.0 at 200 °C; 23.0 at 250 °C; 21.0 at 280 °C; pH up to 7
Shut-off valves GAV 56 F
Weight example DN 15 QuickEM-BK 21 kg (PN 16), DN 50 about 102 kg

How QuickEM differs from a loose trap

A single BK, MK or UNA trap is a component. The QuickEM is a module in which that trap is already combined with isolation, test, view and return elements, so the engineering step is limited to matching the trap type. The module lengths are 821 or 841 mm for DN 15, 908 mm for DN 20 and 988 mm for DN 25, with DN 40 and 50 at 1290 and 1452 mm for the version with bypass. Weights run from 21 kg to about 100 kg.

Planning with QuickEM

Choose the trap family from the steam conditions, then the nominal size from the condensate load. The datasheet limits the module ratings by the sightglasses, or by the measuring electrode in the Control version, with a limit of 238 °C if electrode NRG 16-27 or NRG 16-28 is used. For the stainless version the glass limits the pH to 7 because higher pH can corrode glass at temperature.

Module weights and sizes for QuickEM

The dimension tables give length A, height B and weight for each trap type. For the version with bypass the length A is 821 or 841 mm at DN 15, 908 mm at DN 20 and 988 mm at DN 25, with B of 200 mm. DN 40 and DN 50 modules have lengths of 1290 and 1452 mm and a height of 300 mm. Weights for QuickEM-BK run from 21 kg (PN 16) and 25 kg (PN 40) at DN 15 to 102 kg and 101 kg at DN 50, and for QuickEM-UNA 45 at DN 40 and 50 they are 97 and 115 kg. The QuickEM Control versions are shorter in some sizes, for example 689 mm at DN 15 with BK or MK traps. These numbers matter for skid space and for crane planning, since a DN 50 module weighs around a tenth of a tonne.

The module holds a GESTRA shut-off valve GAV 56 F on each side of the trap, a sightglass VK 14 or VK 16, and a wafer-type non-return valve RK between flanges. A test station NRA 1-3 can be added in the Control version but is not part of the delivery.

Installation and use of QuickEM

Install between counterflanges supplied by the user and bolt the module to the pipe supports provided for its weight, observe the flow direction, and use the shut-off valves for maintenance. When the module is used in heat recovery plants in the GCC, the compact skid reduces site welding and testing time, and a single drawing and a single set of documents can cover the whole drain station instead of five separate items.

Documents and quotation

The datasheet for the QuickEM is attached to this page. Send an RFQ with the type QuickEM, nominal size, trap type, pressure class, material and position of installation, and we will respond for Oman and the GCC.

Documentation and Compliance

Industrial buyers often need more than the hardware. When you order the GESTRA QuickEM, tell us which documents your project or quality team requires, such as certificates of origin, conformity declarations, calibration or test records, or hazardous-area certificates where the variant carries them. Mentioning these at the enquiry stage avoids delays at customs and at goods receipt on site. For tenders and project packages, we can also align the quotation with your line-item format so that GESTRA steam traps & steam specialties items can be checked against the bill of materials quickly.

Ordering Checklist for the GESTRA QuickEM

Before you ask for a quotation for the GESTRA QuickEM, check the full order code on the nameplate of the unit you are replacing, the supply voltage, and the process or signal ranges your system expects. If this is an upgrade rather than a like-for-like swap, tell us the existing make and model so that mounting, wiring and connection details can be checked against the steam traps & steam specialties already installed. For multi-unit orders, list the quantity per site and the delivery location in Oman or the wider GCC, so packing, paperwork and lead time can be confirmed in a single quotation.

Datasheets & Documents
  • PDF Datasheet GESTRA QuickEM Pre-Assembled Condensate Drain Module PN 16/40 Datasheet Download
Reviews (0)

Reviews

There are no reviews yet.

How would you rate this product?

It takes about 10 seconds — just tap a star. Your email is never published.

About brand

GESTRA is the German steam and condensate specialist behind the UNA ball float steam traps, the MPA blowdown valves and a long line of boiler level and conductivity controls. It was founded in Bremen in 1902 by Gustav F. Gerdts, and has been part of Spirax Sarco since 2017.

Seven Star LLC is an independent supplier in Muscat. We list GESTRA steam traps, blowdown valves and boiler control equipment, and supply GESTRA parts and spares to boiler houses and process plants in Oman and the GCC.

GESTRA company profile

Established 29 October 1902, Bremen, Germany, by Gustav Friedrich Gerdts; renamed Gustav F. Gerdts KG in 1907
Ownership history Became a stock corporation (GESTRA AG) in 1987, was taken over by Flowserve in 2002, and has been part of the Spirax Sarco group since 2017
Product families Steam traps, non-return and check valves, boiler blowdown valves, control valves, and boiler control electronics for level, conductivity and temperature
Applications Steam boilers, steam distribution and condensate return in process plants, power stations, hospitals, food and textile plants

Milestones

  • 1902: Gustav Friedrich Gerdts founds the company in Bremen on 29 October.
  • 1907: The company is renamed Gustav F. Gerdts KG.
  • 1987: It becomes a stock corporation, GESTRA AG.
  • 2002: Flowserve takes over GESTRA.
  • 2017: GESTRA becomes part of the Spirax Sarco group.

GESTRA products we list

Series Type What it does
UNA 45, UNA 16, UNA 38 Ball float steam traps Continuous condensate discharge from heat exchangers and process equipment; the UNA 38 is the high-pressure version (PN 100)
BK 45 Bimetallic steam trap Robust trap for steam main drainage and tracing, resistant to water hammer
MK 45, TK 23, SMK 22-81 Thermostatic steam traps Air venting and condensate discharge; the SMK 22-81 is the sanitary version for clean steam
MPA 46 Rapid-action blowdown valve Short, intermittent bottom blowdown that removes sludge from the boiler
NRS 1-54, NRR 2-50, NRR 2-60, NRGT 26-2 Boiler level controls Water level limiting, feedwater control and continuous level measurement
LRGT 16-1, LRR 1-50 Conductivity measurement and control Keeps boiler water conductivity in range through continuous blowdown
TRS 5-50 Safety temperature limiter SIL 3 temperature limiting for boilers and hot water systems

The type of steam trap follows the duty. Ball float traps discharge condensate as soon as it forms, which suits heat exchangers with changing loads. Thermostatic and bimetallic traps hold condensate back slightly and suit steam mains, tracing and air venting. On the boiler itself, GESTRA level and conductivity electronics work as a system: electrodes or transmitters in the boiler, controllers in the panel, and the feedwater and blowdown valves they drive.

Where GESTRA products are used

In Oman and the GCC, GESTRA equipment is used in boiler houses of refineries, petrochemical and fertiliser plants, power and desalination stations, food and beverage plants, laundries, hotels and hospitals.

Ordering GESTRA parts: what we need

Send the type designation, pressure rating (PN) and connection size (DN), the end connection (flanged, screwed or socket weld), the operating pressure and condensate load for steam traps, and the supply voltage and bus type (CAN bus, 4-20 mA) for control equipment. For electrodes, add the insertion length.

Facts checked against GESTRA company history and Bremen city records, October 2026.

FAQ

Questions about the GESTRA QuickEM Pre-Assembled Condensate Drain

Answers from our engineering team on installation, compatibility and integration.

01What is included in the QuickEM module?
Two or three shut-off valves, one BK, MK or UNA steam trap, one sightglass, one wafer-type RK non-return valve, pipes, flanges, gaskets and bolts.
02What is the difference between QuickEM and QuickEM Control?
QuickEM Control replaces the sightglass with an NRG 16 measuring electrode for electronic monitoring of waterlogging and steam loss.
03What sizes and ratings are available?
DN 15, 20, 25, 40 and 50 in PN 16 or PN 40, flanged to EN 1092-1 B1.
04Can QuickEM be installed vertically?
Yes, QuickEM is available for horizontal or vertical installation, with or without bypass; the Control version with UNA traps is horizontal only.
05Are counterflanges supplied?
No. The datasheet states that counterflanges with bolts and gaskets are not part of the delivery.