Brand:

GESTRA BK 29 High-Pressure Steam Trap PN 160 / CL 900

Description

GESTRA BK 29 High-Pressure Thermostatic Steam Trap PN 160: overview

The GESTRA BK 29 is a thermostatic and thermodynamic steam trap with a corrosion-resistant Thermovit regulator made of bimetallic plates that withstand water hammer. It is the highest-rated member of a group that also includes the BK 37 at PN 63 / Class 400 and the BK 28 at PN 100 / Class 600. The GESTRA BK 29 is rated PN 160 / Class 900 in sizes DN 15, 20 and 25, and an ASME version, the BK 29-ASME, is available.

Seven Star LLC is an independent supplier serving Oman and the GCC and is not affiliated with the manufacturer. We list the BK 29 for buyers who need an exact GESTRA type for a repair, a replacement or a new project and want a clear technical summary before they ask for a quotation. Everything below is condensed from the manufacturer datasheet, so you can compare the BK 29 with the line conditions on your own drawings. Where a value is not stated in the datasheet, we leave it out rather than guess.

GESTRA equipment is common on steam and condensate systems, boiler houses and process plants, and many installed units in Omani and Gulf facilities are now several years old. That is why buyers often search by the exact type designation such as BK 29. Matching the designation, nominal size, pressure rating and connection type is the surest way to get the right replacement, and our team can help check these details against the nameplate or the earlier project documentation before a quotation is issued.

Key features of the BK 29

The datasheet describes the following points about the BK 29. They explain why this high-pressure thermostatic steam trap is chosen for its duty and what to look for when comparing it with other options.

  • Thermovit regulator with bimetallic plates, able to withstand water hammer.
  • Internal strainer and integral non-return valve action.
  • Automatic air venting at start-up and during operation, and usable for thermal air venting.
  • Asbestos-free body gasket of graphite and CrNi.
  • Installation in any position.
  • Factory setting that lets the trap discharge condensate with virtually no banking-up.

Technical specifications of the BK 29

The table below summarises the main data for the BK 29 taken from the manufacturer datasheet. Always confirm the final pressure and temperature limits against the datasheet for the exact version and connection you plan to order, because ratings depend on connection type and size.

Parameter Value
Nominal sizes DN 15, 20, 25
Rating, EN version PN 160 flanges to EN 1092-1
Rating, ASME version Class 900 / 1500 flanges to B16.5, butt-weld to B16.25 Sched. 160, socket-weld to B16.11 Class 6000
PMA at 20 C, flanges EN 160 bar g
TMA, flanges EN up to 530 C at the lower pressure limit shown in the datasheet
Differential pressure PMX 110 bar g
PMA, ASME version at 20 C 155.1 bar g (2250 psi)
Differential pressure, ASME version 110 bar g (1595 psi)
Design basis EN 1092-1 for flanges, DIN EN 12516-2 for weld ends, ASME B16.34 for ASME version
Related models in sheet BK 37 PN 63 / CL 400, BK 28 PN 100 / CL 600

Typical applications in Oman and the GCC

The BK 29 is a high-pressure thermostatic steam trap, and the following use cases show where a unit of this kind is typically applied across oil and gas, utilities, water and manufacturing in Oman and the wider GCC. They are examples based on the described function and not a guarantee of suitability, so the actual operating data should always be checked.

  • High-pressure steam mains in refineries, petrochemical complexes and gas plants need traps rated well above standard PN 40 equipment, and PN 160 covers that range.
  • Power stations in the region use high-pressure and superheated steam on turbine drains and main steam lines where condensate must be removed without banking up.
  • Large process plants use thermal air venting at start-up, which this trap supports according to the datasheet.

Selection and compatibility notes

Selecting the BK 29 correctly starts with the process data. Collect the operating pressure, the maximum and minimum temperature, the fluid, the flowrate and the connection standard of the existing pipework, then compare them with the datasheet. The notes below summarise the main decision points for this model.

  • Pick the BK 37, BK 28 or BK 29 according to the pressure class of the line, remembering that the BK 29 has the highest ratings and a differential pressure of 110 bar g.
  • Choose the EN or ASME version to match the flange or weld-end standard of the piping.
  • The datasheet notes that welded and flanged ends have different pressure-temperature tables, so check the correct table for the connection type.

Installation and commissioning of the BK 29

Before installing the BK 29, flush the line to remove weld spatter, scale and construction debris, because even a robust high-pressure thermostatic steam trap can be damaged or held open by foreign particles. Check that the flow direction arrow or the marked inlet on the BK 29 matches the piping, and confirm that the nameplate type, size and pressure rating agree with the purchase documents.

Support the pipework so that no piping stress is transferred to the body of the BK 29. Use new gaskets of a type suitable for the fluid and temperature, tighten flange or union bolts evenly and in a cross pattern, and follow the instructions in the manufacturer installation and operating manual for the exact model. If the equipment is used in a potentially explosive area, the plant operator remains responsible for zoning and for preventing static charge, as the datasheet explains for GESTRA equipment.

During commissioning, bring the system up gradually. Open isolation valves slowly, vent trapped air where the design allows, and observe the BK 29 during the first warm-up for leaks at joints and for unusual noise or vibration. Record the first operating pressure and temperature so that later inspections have a reference.

Maintenance and service

The bimetallic Thermovit regulator is the working element, so regulator inspection or replacement is the main service task.

The internal strainer should be checked when the regulator is inspected.

A short routine inspection plan helps the BK 29 last longer. Note the date of installation, the service conditions and any events such as water hammer or overpressure. At each planned shutdown, inspect the visible joints, check for external corrosion or leakage and compare performance against the commissioning record. Only use spare parts and gaskets that suit the exact type and rating of the BK 29, and isolate and depressurise the line fully before any work is started.

Related products and ordering notes

Orders for the BK 29 should state the type designation, nominal size, pressure rating, end connection standard, material or version and the quantity required. If you are replacing an existing unit, add the nameplate data and a photograph of the nameplate when possible. The manufacturer family also includes other steam, condensate and flow control products, and we can quote related items together with the BK 29 when you send a combined enquiry. Seven Star LLC does not publish prices on this page, so each enquiry is answered with a written quotation.

Frequently asked questions

What pressure class is the BK 29? The BK 29 is rated PN 160 for EN flanges and Class 900 / 1500 for the ASME version, as listed in its datasheet.

What is its differential pressure limit? The datasheet gives a maximum admissible differential pressure of 110 bar g, which is 1595 psi in the ASME table.

Which sizes are available? DN 15, 20 and 25. Please confirm against the manufacturer datasheet.

Can it be installed in any position? Yes. The datasheet states installation in any position.

Does it include a strainer? Yes. It has an internal strainer and integral non-return valve action.

Documents and quotation

The manufacturer datasheet for the BK 29 is attached to this page as a PDF so you can verify every value above and share it with your engineering team. To receive a quotation, send an RFQ that includes the part number BK 29, the nominal size, the pressure rating and connection type, and the quantity you need. Our team in Muscat will confirm availability and lead time and reply with a written offer for delivery to Oman and the GCC.

Datasheets & Documents
  • PDF Datasheet GESTRA BK 29 High-Pressure Steam Trap PN 160 / CL 900 Datasheet Download
Reviews (0)

Reviews

There are no reviews yet.

How would you rate this product?

It takes about 10 seconds — just tap a star. Your email is never published.

About brand

GESTRA is the German steam and condensate specialist behind the UNA ball float steam traps, the MPA blowdown valves and a long line of boiler level and conductivity controls. It was founded in Bremen in 1902 by Gustav F. Gerdts, and has been part of Spirax Sarco since 2017.

Seven Star LLC is an independent supplier in Muscat. We list GESTRA steam traps, blowdown valves and boiler control equipment, and supply GESTRA parts and spares to boiler houses and process plants in Oman and the GCC.

GESTRA company profile

Established 29 October 1902, Bremen, Germany, by Gustav Friedrich Gerdts; renamed Gustav F. Gerdts KG in 1907
Ownership history Became a stock corporation (GESTRA AG) in 1987, was taken over by Flowserve in 2002, and has been part of the Spirax Sarco group since 2017
Product families Steam traps, non-return and check valves, boiler blowdown valves, control valves, and boiler control electronics for level, conductivity and temperature
Applications Steam boilers, steam distribution and condensate return in process plants, power stations, hospitals, food and textile plants

Milestones

  • 1902: Gustav Friedrich Gerdts founds the company in Bremen on 29 October.
  • 1907: The company is renamed Gustav F. Gerdts KG.
  • 1987: It becomes a stock corporation, GESTRA AG.
  • 2002: Flowserve takes over GESTRA.
  • 2017: GESTRA becomes part of the Spirax Sarco group.

GESTRA products we list

Series Type What it does
UNA 45, UNA 16, UNA 38 Ball float steam traps Continuous condensate discharge from heat exchangers and process equipment; the UNA 38 is the high-pressure version (PN 100)
BK 45 Bimetallic steam trap Robust trap for steam main drainage and tracing, resistant to water hammer
MK 45, TK 23, SMK 22-81 Thermostatic steam traps Air venting and condensate discharge; the SMK 22-81 is the sanitary version for clean steam
MPA 46 Rapid-action blowdown valve Short, intermittent bottom blowdown that removes sludge from the boiler
NRS 1-54, NRR 2-50, NRR 2-60, NRGT 26-2 Boiler level controls Water level limiting, feedwater control and continuous level measurement
LRGT 16-1, LRR 1-50 Conductivity measurement and control Keeps boiler water conductivity in range through continuous blowdown
TRS 5-50 Safety temperature limiter SIL 3 temperature limiting for boilers and hot water systems

The type of steam trap follows the duty. Ball float traps discharge condensate as soon as it forms, which suits heat exchangers with changing loads. Thermostatic and bimetallic traps hold condensate back slightly and suit steam mains, tracing and air venting. On the boiler itself, GESTRA level and conductivity electronics work as a system: electrodes or transmitters in the boiler, controllers in the panel, and the feedwater and blowdown valves they drive.

Where GESTRA products are used

In Oman and the GCC, GESTRA equipment is used in boiler houses of refineries, petrochemical and fertiliser plants, power and desalination stations, food and beverage plants, laundries, hotels and hospitals.

Ordering GESTRA parts: what we need

Send the type designation, pressure rating (PN) and connection size (DN), the end connection (flanged, screwed or socket weld), the operating pressure and condensate load for steam traps, and the supply voltage and bus type (CAN bus, 4-20 mA) for control equipment. For electrodes, add the insertion length.

Facts checked against GESTRA company history and Bremen city records, October 2026.

FAQ

Questions about the GESTRA BK 29 High-Pressure Steam Trap PN 160 / CL

Answers from our engineering team on installation, compatibility and integration.

01What pressure class is the BK 29?
The BK 29 is rated PN 160 for EN flanges and Class 900 / 1500 for the ASME version, as listed in its datasheet.
02What is its differential pressure limit?
The datasheet gives a maximum admissible differential pressure of 110 bar g, which is 1595 psi in the ASME table.
03Which sizes are available?
DN 15, 20 and 25. Please confirm against the manufacturer datasheet.
04Can it be installed in any position?
Yes. The datasheet states installation in any position.
05Does it include a strainer?
Yes. It has an internal strainer and integral non-return valve action.