Brand:

GESTRA BK 36A-7 Steam Trap Unit for Universal Connectors Class 300

Description

GESTRA BK 36A-7 steam trap unit for universal connectors

The GESTRA BK 36A-7 (written BK 36 A/7 in the datasheet) is not a conventional bolt-in trap with its own end flanges. It is a stainless steel bimetallic trap unit, about 0.7 kg in weight, designed to be attached to a universal connector with two hexagon head screws. The connector stays welded or screwed in the line, and the BK 36A-7 unit is exchanged in minutes without cutting any pipe. That makes it popular on long steam distribution and tracing networks with dozens of identical drain points.

Seven Star LLC is an independent supplier serving Oman and the GCC and is not affiliated with the manufacturer. This page paraphrases the datasheet only; it is meant to help you match the unit to the connectors already installed on site.

What is in the BK 36A-7 unit

  • Thermostatic bimetallic regulator of corrosion-resistant Duo stainless steel, able to withstand water hammer.
  • Cover in 1.4408 / A351-CF8M cast stainless steel.
  • Nozzle support in 1.4404 / A182-F316L.
  • Integral spiral wound gasket in graphite/CrNi, so no separate gasket is needed at the connector.
  • Two hexagon head screws M 3/8-16 UNC x 25 mm in 1.7225 / A193 B7, nickel plated.
  • Complete unit weight 0.7 kg (1.5 lb).

BK 36A-7 ratings and data

Parameter Value
Type GESTRA BK 36A-7, thermostatic bimetallic trap unit
Class ASME B16.5 Class 300 (PN 50), material group 2.2
Max. operating pressure PMO 33.7 bar (488 psig)
Max. allowable temperature TMA 400 °C (752 °F)
PMA 49.6 barg at 38 °C; 42.2 at 100 °C; 35.7 at 200 °C; 31.6 at 300 °C; 29.4 at 400 °C
Differential pressure 32 bar (465 psi)
Connector sizes 1/2, 3/4, 1 inch; UCY 36 with strainer or UC 36 without
Connector end types Screwed G or NPT, socket-weld
Connector weight 0.7, 0.8, 1.0 kg for 1/2, 3/4, 1 inch
Fluids Group 2 (PED)
Test certificates 2.2 or 3.1 available on request

How BK 36A-7 differs from MK 36 A/71, MK 36 A/72 and DK 36 A/7

All four units on the datasheet use the same connector and the same 0.7 kg weight, but they use different regulators. The BK 36A-7 uses a bimetallic Duo plate regulator and discharges condensate with virtually no banking up plus automatic air venting. The MK 36 A/71 and MK 36 A/72 use a thermostatic capsule with membrane, with a tandem seat in the 71 and a flat seat in the 72. The DK 36 A/7 is a thermodynamic disc trap. For the same differential pressure, the capacity chart shows different curves per type, so check the chart if you move from one type to another.

Using the BK 36A-7 on steam networks in the GCC

Bimetallic traps respond to temperature and not to flow rate, so they cope well with the wide load swings typical of drip legs and tracer manifolds on refinery and gas plant utility steam. The BK 36A-7 is used where the steam pressure is moderate, up to the 33.7 bar operating limit, and where the user wants to change traps quickly. Because the unit has a corrosion-resistant stainless steel housing, it also suits coastal sites where carbon steel traps corrode on the outside.

Installing the BK 36A-7 unit

Install the connector first, either the UCY 36 with built-in strainer or the UC 36 without, in the sizes 1/2, 3/4 or 1 inch with threaded or socket-weld ends. Place the trap unit against the connector with its integral spiral wound gasket, and tighten the two M 3/8 screws evenly. The datasheet states the unit is for universal connectors of all makes, so existing swivel connectors from other suppliers can take it provided the pressure class matches. Allow clearance around the connector body for the 156 mm total height of a UCY 36 assembly.

Maintenance of BK 36A-7

Because the trap unit is replaceable as a whole, many plants run a rotation: remove the unit, test it on a bench or send it for overhaul, and fit a tested spare. The unit contains no float and no seals that age with temperature, but scale or dirt can stop the nozzle from closing. For ATEX purposes the unit has no ignition source, though the operator is responsible for static discharge.

Capacity and sizing of BK 36A-7

The datasheet includes a capacity chart that plots hot-condensate capacity against differential pressure from about 1 bar up to 32 bar for each of the four trap units, expressed in kg/h and lb/h, together with the discharge capacity of cold condensate at 20 °C. The vertical axis runs from 40 kg/h up to several thousand kilograms per hour on a logarithmic scale. Read the curve for the BK 36A-7 at your actual differential pressure: the unit discharges the indicated hot water capacity with virtually no banking up, so heat-exchange surface upstream is not flooded. The 32 bar differential limit marks the right-hand end of the chart. When the application needs more flow than one unit passes at the available differential, fit a larger-capacity trap type rather than two units in parallel, and verify that the pipe size matches the connector size of 1/2, 3/4 or 1 inch.

Ordering information for BK 36A-7

State the type, connection to the universal connector, pressure class Class 300, material 1.4408 / A351-CF8M, and whether test certificates 2.2 or 3.1 are required. Mention the connector type if you also need UC 36 or UCY 36.

Documents and quotation

The datasheet for BK 36A-7 is attached to this page. Send an RFQ with part number BK 36A-7, quantity and connector details, and we will reply with availability for Oman and the GCC.

What to Include in Your GESTRA BK 36A-7 Enquiry

An accurate quotation for the GESTRA BK 36A-7 depends on a few details. Please share the complete part number, any suffix codes for options or approvals, the operating conditions at the installation point, and whether certificates of conformity or test reports must ship with the goods. It also helps to know whether the unit is for planned maintenance, a shutdown or an urgent breakdown, because that decides how it is sourced and shipped. With this information our team can check compatibility with your existing steam traps & steam specialties and reply with availability and a realistic delivery estimate.

Datasheets & Documents
  • PDF Datasheet GESTRA BK 36A-7 Steam Trap Unit for Universal Connectors Class 300 Datasheet Download
Reviews (0)

Reviews

There are no reviews yet.

How would you rate this product?

It takes about 10 seconds — just tap a star. Your email is never published.

About brand

GESTRA is the German steam and condensate specialist behind the UNA ball float steam traps, the MPA blowdown valves and a long line of boiler level and conductivity controls. It was founded in Bremen in 1902 by Gustav F. Gerdts, and has been part of Spirax Sarco since 2017.

Seven Star LLC is an independent supplier in Muscat. We list GESTRA steam traps, blowdown valves and boiler control equipment, and supply GESTRA parts and spares to boiler houses and process plants in Oman and the GCC.

GESTRA company profile

Established 29 October 1902, Bremen, Germany, by Gustav Friedrich Gerdts; renamed Gustav F. Gerdts KG in 1907
Ownership history Became a stock corporation (GESTRA AG) in 1987, was taken over by Flowserve in 2002, and has been part of the Spirax Sarco group since 2017
Product families Steam traps, non-return and check valves, boiler blowdown valves, control valves, and boiler control electronics for level, conductivity and temperature
Applications Steam boilers, steam distribution and condensate return in process plants, power stations, hospitals, food and textile plants

Milestones

  • 1902: Gustav Friedrich Gerdts founds the company in Bremen on 29 October.
  • 1907: The company is renamed Gustav F. Gerdts KG.
  • 1987: It becomes a stock corporation, GESTRA AG.
  • 2002: Flowserve takes over GESTRA.
  • 2017: GESTRA becomes part of the Spirax Sarco group.

GESTRA products we list

Series Type What it does
UNA 45, UNA 16, UNA 38 Ball float steam traps Continuous condensate discharge from heat exchangers and process equipment; the UNA 38 is the high-pressure version (PN 100)
BK 45 Bimetallic steam trap Robust trap for steam main drainage and tracing, resistant to water hammer
MK 45, TK 23, SMK 22-81 Thermostatic steam traps Air venting and condensate discharge; the SMK 22-81 is the sanitary version for clean steam
MPA 46 Rapid-action blowdown valve Short, intermittent bottom blowdown that removes sludge from the boiler
NRS 1-54, NRR 2-50, NRR 2-60, NRGT 26-2 Boiler level controls Water level limiting, feedwater control and continuous level measurement
LRGT 16-1, LRR 1-50 Conductivity measurement and control Keeps boiler water conductivity in range through continuous blowdown
TRS 5-50 Safety temperature limiter SIL 3 temperature limiting for boilers and hot water systems

The type of steam trap follows the duty. Ball float traps discharge condensate as soon as it forms, which suits heat exchangers with changing loads. Thermostatic and bimetallic traps hold condensate back slightly and suit steam mains, tracing and air venting. On the boiler itself, GESTRA level and conductivity electronics work as a system: electrodes or transmitters in the boiler, controllers in the panel, and the feedwater and blowdown valves they drive.

Where GESTRA products are used

In Oman and the GCC, GESTRA equipment is used in boiler houses of refineries, petrochemical and fertiliser plants, power and desalination stations, food and beverage plants, laundries, hotels and hospitals.

Ordering GESTRA parts: what we need

Send the type designation, pressure rating (PN) and connection size (DN), the end connection (flanged, screwed or socket weld), the operating pressure and condensate load for steam traps, and the supply voltage and bus type (CAN bus, 4-20 mA) for control equipment. For electrodes, add the insertion length.

Facts checked against GESTRA company history and Bremen city records, October 2026.

FAQ

Questions about the GESTRA BK 36A-7 Steam Trap Unit for Universal

Answers from our engineering team on installation, compatibility and integration.

01Does the BK 36A-7 include a universal connector?
The datasheet says the unit is available either complete with a UC 36 or UCY 36 connector or alone for fitting into an installed connector.
02What pressure class is the BK 36A-7?
ASME B16.5 Class 300 (PN 50) with a maximum operating pressure of 33.7 bar and 400 degrees C allowable temperature.
03How heavy is the BK 36A-7?
The trap unit weighs 0.7 kg (1.5 lb); the connectors weigh 0.7, 0.8 and 1.0 kg for 1/2, 3/4 and 1 inch.
04What differential pressure can the BK 36A-7 handle?
The datasheet gives an admissible differential pressure of 32 bar (465 psi).
05How is the BK 36A-7 different from the DK 36A-7?
The BK 36A-7 uses a bimetallic Duo regulator, while the DK 36A-7 is a thermodynamic disc trap with a corrosion-resistant valve disc.